• Communications of the Korean Mathematical Society
• /
• v.35 no.3
• /
• pp.773-787
• /
• 2020

In this paper we consider the uniqueness of meromorphic functions when two linear differential polynomials share a set of values. Our result improves and rectifies a result of An and Khoai.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.4
• /
• pp.374-383
• /
• 2013

This paper presents a design for improvement of isolation characteristics by the inserted stub structure on ground plane of a handy terminal which is composed of a main antenna and a sub antenna covered LTE bandwidth. In order to compensate for a resonance length of proposed antenna and to realize a high isolation characteristic, a pair of stub was inserted and located on ground plane that currents from two antennas were converged. A simulated isolation characteristic of antenna without stub at the LTE class 13 band was about -5 dB, but its characteristics of proposed antenna with two stubs at uplink(777~787 MHz) and downlink(746~756 MHz) of the LTE class 13 band were about -12 dB and -15 dB, respectively. An average gain of a fabricated antenna with two stubs was observed about -2 dBi above and it showed good results with comparison of business condition that the average gain of commercial handy terminal has to appear -4 dBi above. The measured S-parameter characteristics and radiation patterns showed a reasonable agreement with the simulation results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.70-72
• /
• 2011

In this paper, Dual-band monopole antenna for MIMO system is proposed. At this time the FR-4 substrate was used as a dielectric is 4.4, the size of 83mm * 50mm * 1.6mm size 3mm, the width of the proposed antenna by a $50{\Omega}$ microstrip line feed, and, LTE in the frequency 746-787MHz, 1710-1755MHz has been designed to operate at the resonant frequency less than-10dB and showed a good return loss in the operation.

• Journal of Navigation and Port Research
• /
• v.36 no.10
• /
• pp.787-793
• /
• 2012

A hull form design technique to enhance the wave-making resistance performance for a medium size high speed Ro-Pax ship was studied introducing an optimization method and an automatic hull form modification method. SQP(sequential quadratic programming) was applied as the optimization algorithm and the geometry of hull surface was represented and modified using the NURBS(Non-Uniform Rational B-Spline). The wave-making resistance performance as an objective function in the optimization procedure was evaluated using the Rankine source panel method in which nonlinearity of the free surface boundary conditions and the trim and sinkage of the ship was fully taken into account. Using the Ro-Pax ship as a base hull, the hull-form optimization method was applied to obtain the hull shape that produced the lower wave-making resistance. To verify the validity of the hull-form optimization method, the numerical results was compared with the model test results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.11 s.114
• /
• pp.1040-1049
• /
• 2006

A design method for minimizing transmission loss of a broadband right-angle transition from a coaxial cable to a microstrip line is presented. The right-angle transition has been widely used where printed circuit applications need to be fed from behind the ground plane using coaxial line. To obtain the minimized transmission loss over the whole operating frequency range of the transition, design parameters such as ground aperture and probe diameters, ground aperture offset, and stub length are optimized using a commercial electromagnetic simulation software. Results are presented for the optimum right-angle transition from an SMA connector to a microstrip line on common reinforced 0.787 mm thick PTFE substrates. Measurements of a fabricated transition show that reflection coefficient is less than -22 dB and insertion loss is less than 0.45 dB over $0.05{\sim}20GHz$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4B
• /
• pp.783-787
• /
• 2000

A microprocessor, which is used as a CPU for state-of-the-art personal computers, adopts 256KB or 512KB L2(Level 2) cache memory. This cache hires Direct Mapping Procedure, 32B Line Size, and no Write Allocation. In this cache architecture, we can expert about 2.5% hit ratio improvement by using 8-way Set Associative Mapping instead of Direct Mapping, 128B Line Size instead of 32B, and Write Allocation.

• Steel and Composite Structures
• /
• v.19 no.3
• /
• pp.777-787
• /
• 2015

Production and properties of metal matrix composites reinforced with an in-situ high aspect ratio $AlB_2$ flake have been investigated. Boron 2.2wt.% was dissolved in pure Al and Al-Cu alloy at $1300^{\circ}C$ by adding directly boron oxide which resulted in 4 vol.% reinforcing phase. The in-situ $AlB_2$ flake concentration was increased up to 30 vol.% in order to increase the tensile strength of the composites. Hardness, compressive strength and tensile strength of the composite were measured and compared with their matrix. Results showed that 30 vol.% $AlB_2/Al$ composite show a 193% increase in the compressive strength and a 322% increase in compressive yield strength. Results also showed that ductility of composites decreases with adding $AlB_2$ reinforcements.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.786-787
• /
• 2006

The magnetic inductance of nanocrystalline $Fe_{73}Si_{16}B_7Nb_3Cu_1$ and an amorphous FeSiB powder sheet has been investigated to identify RFID performance. The powder was mixed with binder and solvent and tape-casted to form films. Results show annealing significantly influenced on the inductance of the material. The surface oxidation of the particles was the main reason for the reduced inductance. The maximum inductance of $Fe_{73}Si_{16}B_7Nb_3Cu_1$ alloy was about $88{\mu}H$ at 17.4 MHz, about 65% greater compared to the FeSiB alloy. The higher inductance in the nanocrystalline alloy indicates it may be used as a potential replacement of current RFID materials.

• Aerospace Industry
• /
• s.89
• /
• pp.51-53
• /
• 2005

한국형 헬기사업 '유로콥터' 최종결정/F-15K, '슬램 이글'로 명명/한국항공우주산업(주),B737 수평 미익 초도호기 출하/항공제작사 꿈 부푸는 대한항공, 3년간 R&D 1천억 투자/ 한국항공우주산업(주),UAE 두바이 에어쇼 2005 최고 참가 업체상 수상/대한항공,787 Nose Wheel Well Assembly 사업 수주계약/넥스원퓨 처-보잉공중조기경보통제기 사업 관련 합의각서 체결/퍼스텍, 프랑스 탈레스사와 전략적 MOU 체결/근접감시용 무인항공기 개발사업 산업자원부 장관 표창 수상

• Bulletin of the Korean Mathematical Society
• /
• v.54 no.3
• /
• pp.763-787
• /
• 2017

A graph is called 1-planar if it can be drawn in the Euclidean plane ${\mathbb{R}}^2$ such that each edge is crossed by at most one other edge. The weight of an edge is the sum of degrees of two ends. It is known that every planar graph of minimum degree ${\delta}{\geq}3$ has an edge with weight at most 13. In the present paper, we show the existence of edges with weight at most 25 in 3-connected 1-planar graphs.