• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.2
• /
• pp.79-83
• /
• 2020

A photoelectric grain color sorter is commonly used in postharvest technology to detect and separate grains considered to be of good quality from those of poor quality based on color. In this study, the milled rice of Haedamssal cultivated under early transplanting conditions was evaluated using the color sorting device. Rice was classified according to standard grades of 64% for grade A, 18% for grade B, and 17.2% for grade C. By head rice ratio analysis, the milled rice of Haedamssal was recorded a grade A of 72.9%, representing a 24.5% improvement compared to the 48.4% of original grains. However, the grades B and C of Haedamssal rice were lower than those of original rice. In addition, grade A whiteness of Haedamssal rice was 45.3, which was lower than that of original grains. The color affinity redness was significantly lower in Haedamssal rice than in the screening control. No significant difference was found in the amylose and protein contents of rice before and after selection by the grain color sorter. In contrast, grain viscosity analysis revealed an increase in peak and final viscosities, while the consistence viscosity increased in low grade levels. Our results suggest that the photoelectric grain color sorter could improve the head rice ratio and palatability of early transplanted Hadamssal rice.

• Journal of Sensor Science and Technology
• /
• v.6 no.4
• /
• pp.316-327
• /
• 1997

Polycrystalline $Sr_{2}Nb_{2}O_{7}$ and $La_{2}Ti_{2}O_{7}$ ceramics with very high Curie temperatures were synthesized by the chemical coprecipitation method (CCP). The powders synthesized were identified by XRD and their sintering behavior and physical properties were studied. The grain-orientation and electrical properties of sintered ceramics were investigated as a function of firing temperature. Single phase could be obtained by CCP method at temperature lower than that of the conventional method by 100 - $150^{\circ}C$. Strontium niobate, $Sr_{2}Nb_{2}O_{7}$, powder was Prepared by CCP method at temperatures as low as $800^{\circ}C$ via intermediate phase of $Sr_{5}Nb_{4}O_{15}$ formed at $700^{\circ}C$. The resulting CCP-derived powder was observed to have finer and more uniform particle size distribution than those obtained through the conventional or the molten salt synthesis method. Sintering of CCP-derived $Sr_{2}Nb_{2}O_{7}$ powder at $1500^{\circ}C$ yielded a highly dense ceramics with 97% theoretical density. Very high grain-orientation developed along the (0k0) direction was observed by SEM, which resulted in anisotropic dielectric properties of the sintered samples, with the dielectric constant values approaching those for single crystal.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.4 no.1
• /
• pp.81-91
• /
• 1968

To investigate the effects of foliage clipping time, degree, and nitrogen top-dressing after clipping on the growth and the agronomic characteristics, rice plants grown under ordinary cultural practices were clipped at the maximum tiller stage, 10 days prior to, and after that stage, respectively, with varying clipping, height, as 0, 1/3, 1/2, and 2/3 of plant height. And nitrogen was top-dressed at the rate of 0, 2, 4, 6 kg per 10 are immediately after clipping. The variety used was ＂Jinheung＂. The results obtained are outlined as follows: 1. Effect of clipping on the growth of rice plant: The subsequent growth was quite rapid during 10 days after clipping, and resulted, on the whole, in nearly complete recovery of defoliation by 20 days after clipping. a) Generally, the later the clipping time, the more growth accelerated. Rice plants clipped before the differentiation of ear primordia nearly recovered the damage, and in certain cases exceeded non-clipped plants in height. But the height of the rice plant clipped after the differentiation of ear primordia was somewhat smaller than that of non-clipped. b) Growth rate was rather rapid in the case of severe cutting, and the height of slightly clipped plants was taller than that of non-clipped plants. However, rice plants clipped to the extent of 2/3 of plant height did not fully recover the damage of defoliation compared to non-clipped plants. c) Nitrogen dressing was effective to rapid recovery of defoliation, the effect increasing with the increasing amount of application. d) Ear-heading was delayed in clipped plots, and this tendency was more apparent with later clipping time, more severe clipping, and increased amounts of nitrogen application after cutting. The range was 6 days at maximum. 2. Effect of defoliation on the yield and its components of rice plants: The yield response to clipping varied somewhat with its time, degree, and nitrogen application after cutting: yield increase of about 10% and decreasement of about 25% at maximum compared to the control plot. Grain yield of most plots was decreased. a) Clipping before the differentiation of ear primordia did not much affect the agronomic characteristics of rice plants. However, clipping after that growth stage decreased culm length, number of panicles, number of spikelets per panicle, and maturing rate of grain to some extent. Consequently this treatment resulted in decrease of about 10% in grain and straw production in spite of increase in panicle length and effective tillering rate. b) Slight, clipping decreased number of spikelets per panicle a little, and the yield of grain and straw by 4-5%, although effective tillering rate was somewhat increased. With severe clipping, panicle kngth, number of panicles, and number of spikelets per panicle decreased more, and the yield of grain and straw decreased about 10%. c) Nitrogen dressing after clipping at the rate of 2 kg per 10 are was effective in increasing grain yield. Nitrogen application over the rate of 4 kg per 10 are increased culm length, number of spikelets per panicle, and straw production, but this decreased the maturing rate, and the 1, 000-grains weight to some extent and resulted in decrease of grain yield.

• Journal of Magnetics
• /
• v.9 no.4
• /
• pp.101-104
• /
• 2004

The crystallization behaviours of nanocomposite made by a function of quenching rate (roller speed) were studied. The results showed that there was one step c$\mathbb{r}$ystallization process for the alloy quenched at roller speed of 32 m/s, which could be shown as, Am (amorphouse) + ${\alpha}-Fe/Nd_2Fe_{14}B$ ${\rightarrow}$ ${\alpha}-Fe/Nd_2Fe_{14}B$ . For the alloy quenched at roller speed of 40 m/s, there was steps crystallization process taking place at different temperatures, which could be shown as, Am ${\rightarrow}$ ${\alpha}-Fe/Nd_2Fe_{23}B_3+Nd_2Fe_{14}B+Am`$ ${\rightarrow}$ ${\alpha}-Fe/Nd_2Fe_{14}B$. The presence of transition phase ($Nd_2Fe_{23}B_3$) was harmful to get fine and uniform grain size during crystallization process. Uniform microstructures and high magnetic properties could be attained for the as-quenched alloy containing less amorphous phase and no presence of transition phase during annealing treatment. For the alloy prepared at roller speed of 32 m/s, the following properties were obtained, $B_r= 0.904 T,_iH_c = 801 kA/m, (BH)_{max} = 122 kJ/m^3 and M_r/M_s = 0.6$.

• Journal of the Korean Magnetics Society
• /
• v.3 no.3
• /
• pp.190-195
• /
• 1993

새로운 Fe기 초미세 결정립합금의 제조 가능성 및 자기특성에 관하여 조사하였다. 고포화자화 (Fe.$_{85}$Co.$_{15}$ )$_{80}$B$_{20}$ 비정질합금에서 천이금속을 약 10 at.% Al으로 치환한 (Fe.$_{85}$ Co.$_{15}$ )$_{70}$B$_{20}$Al$_{10}$ 합금은 급속응고에 의하여 비정질 기지내에 직접 .alpha. -Fe(Co)의 석출이 가능하다. 또한 (Fe.$_{85}$Co.$_{15}$ )$_{70}$B$_{20}$Al$_{10}$합금에 2~6 at.% Nb의 첨가는 급속 응고시 결정립성장을 억제하고 포화자왜를 약 6ppm이하로 감소시켜 자기 특성을 개선시킨다. 열처리에 의한 자기 특성은 Nb의 치환량이 증가할 수록 감소한다. 400 .deg. C에서 1시간 열처리한 (Fe.$_{85}$Co.$_{15}$ )$_{70}$ B$_{18}$ Al$_{10}$Nb$_{2}$합금은 평균 약 8nm이하의 .alpha. -Fe(Co) 결정립으로 구성된 초미세 결정립합금 으로 제조가 가능하며, 포화자속밀도, 철손 및 투자율 (f=50 kHz, B$_{m}$ =0.2 T)이 각각 1.2 T, 12W/kg 및 2.5 *$10^{4}$으로 가장 우수하다. 이는 Fe-Si-B-Nb-Cu 초미세결정립합금 및 영자왜 Co기 비정질합금과 거의 같은 자기특성을 나타낸다.다..다.다..낸다.다..

• Food Science and Biotechnology
• /
• v.17 no.3
• /
• pp.527-533
• /
• 2008

For preparation of high quality kochujang by the traditional fermentation method, 4 types of kochujang were prepared with brick- or grain-shaped meju fermented with different strains (Aspergillus sojae, Aspergillus oryzae+Bacillus subtilis). After 100 days of fermentation at $25^{\circ}C$, the moisture, pH, salt, and ethanol content of kochujang were 40.52-43.20%, 4.71-4.82, 8.7-9.1%, and 0.75-0.94%, respectively, showing slight differences according to the strains and shapes of meju. Titratable acidities were slightly increased for up to 60 days of fermentation. The amino-type nitrogen content of kochujang prepared with brick-shaped meju (A. oryzae+B. subtilis) was the highest (164.20 mg%) among all of the kochujang types. The redness (a) value of kochujang prepared with brick-shaped meju (A. sojae) were higher (19.08) than those of other treatments (18.37-18.59). Sensory evaluation of kochujang prepared with grain-shaped meju (A. sojae) showed the highest scores for color and overall acceptability, 'at $6.43{\pm}1.87$ and $6.29{\pm}1.44$, respectively. It was estimated that high quality kochujang could be made by using meju fermented with selected strains.

• Journal of the Korean Ceramic Society
• /
• v.38 no.11
• /
• pp.993-999
• /
• 2001

Phase formation and proton conduction in BaO doped LaSc $O_3$with perovskite structure were studied. L $a_{0.6}$B $a_{0.4}$Sc $O_{2.8}$, viz. 40at% $Ba^{2+}$ ion doped composition, showed a single cubic phase, while the other compositions doped less than 30 at% $Ba^{2+}$ ion showed the cubic phase and the orthorhombic one. Above $650^{\circ}C$ oxygen ion conduction was dominant in $N_2$atmosphere and below this temperature proton conduction was observed in wet atmosphere. All compositions were found to be the pure proton conductors below 30$0^{\circ}C$. The proton conductivity (bulk) of L $a_{0.6}$B $a_{0.4}$Sc $O_{2.8}$ was higher than those of any other composition.osition.ion.

• Journal of the Korean Ceramic Society
• /
• v.38 no.11
• /
• pp.1046-1054
• /
• 2001

Effects of B$_2$O$_3$and CuO addition on the microwave dielectric properties of the PbWO$_4$-TiO$_2$ceramics were investigated in order to use this material as an LTCC material for fabrication of a multilayered RF passive components module. We found that PbWO$_4$could be used as an LTCC material because of its low sintering temperature (8$50^{\circ}C$) and fairy good microwave dielectric properties($\varepsilon$$_{r}$=21.5, Q$\times$f$_{0}$=37200 GHz and $\tau$$_{f}$ =-31 ppm/$^{\circ}C$). In order to stabilize $\tau$$_{f}$ of PbWO$_4$, TiO$_2$was added to the PbWO$_4$and the mixture was sintered at 8$50^{\circ}C$. A near zero $\tau$$_{f}$ value (+0.2 ppm/$^{\circ}C$) was obtained with 8.7 mol% TiO$_2$addition. $\varepsilon$r and Q$\times$f$_{0}$ values were 22.3 and 21400 GHz, respectively. It was believed that the decrement of Q$\times$f$_{0}$ value with TiO$_2$addition was resulted from increasing grain boundary. In order to improve Q$\times$f$_{0}$, various amounts of B$_2$O$_3$and CuO were added to the 0.913PbWO$_4$-0.087TiO$_2$mixture. The optimum amount of CuO was 0.05 wt%. At this addition, the 0.913PbWO$_4$-0.087TiO$_2$ceramic showed $\varepsilon$$_{r}$=23.5, $\tau$$_{f}$ =-2.2ppm/$^{\circ}C$, and Q$\times$f$_{0}$=32900 GHz after sintered at 8$50^{\circ}C$. In case of B$_2$O$_3$addition, the optimum amount range was 1.0~2.5 wt% at which we could obtain following results; $\varepsilon$$_{r}$=20.3~22.1, Q$\times$f$_{0}$=48700~54700 GHz, and $\tau$$_{f}$ =+2.4~+8.2ppm/$^{\circ}C$.

• Journal of Welding and Joining
• /
• v.18 no.2
• /
• pp.49-56
• /
• 2000

Recently developed Austenite stainless steel, 309L was used to overlay on 3Cr-1Mo-V-Ti-B steels, using Electroslag welding process, which wide electrodes were adopted. Transition region in welding interlayer relating to disbonding crack was investigated. Also, the effect of welding condition on the width of transition region and coarsening grains of the austenite were studied. 1) With increasing welding speed the width of martensite at transient region was increased, but the amount of delta ferrite in weld metal was reduced, being fine grained. 2) The form of martensite at the transition region was occurred by reversible transformation during cooling since the interdiffusion of Cr and Ni from weld metal and Fe and C from base metals at the transition region, causes to lowering the concentration of Cr and Ni at the transition region, leading to increasing Ms point. 3) With increasing welding speed, the grain of austenite formed at the welding interface was finer. With increasing welding current under the same welding speed, the grain size of the austenite was finer. At high current, original grain size of the austenite is coarse, but the austenite has fine grains because the austenite was transformed to martensite during cooling. 4) In the case of high welding speed, the width of martensite at the welding interface was increased, but the grain size of austenite at the welding interface was finer. This indicates that the inhibition of disbonding crack may be achieved through dispersening fine carbides in the gain boundary.

• Korean Journal of Organic Agriculture
• /
• v.15 no.4
• /
• pp.413-424
• /
• 2007

This trial was carried out to determine effects of TMR(Total Mixed Ration) in comparison to conventional diet on feed intake, digestibility, and nitrogen retention in Korean black goats. Twelve Korean black goats were allotted to treatments in four groups of three goats and the they were housed in separate metabolism cages for 21 days. Treatments included conventional diet(A: rice straw and commercial concentrates) as a control group and three TMR groups(B: rice straw and commercial TMR; C: 30% organic whole barley silage and rice straw with organic grain; D: 60% organic whole barley silage with organic grain). The results obtained are summarized as follows. Dry matter intake, fecal excreta, digestible dry matter, metabolic intake and feed intake of BW were significantly higher(p<0.05) compared with A, B, C treatment. The digestibility for most of nutrients except NFC was significantly higher(p<0.05) for D treatment than the others. On the other hand, the digestibility of NFC was higher for B treatment than for the others, even if it was not significantly different across treatments. Nitrogen intake was lower for D treatment, but the significant differences were not found across treatments. N retention rate was higher for B treatment with significant difference. For the blood composition, HDL cholesterol and Immunoglobulin G were significantly higher(p<0.05) for C, D treatment than the others. The results showed that, in comparison with A treatment(conventional diet) and B treatment(commercial TMR), dry matter intake, nutrient digestibility and N retention rate were not lower in C treatment(30% organic whole barley silage) and HDL cholesterol was increased after experiment. Therefore, it could be concluded that TMR with organic whole barley silage might contribute to the production of a high quality and safer meat in goat production.