• Journal of the Korean Chemical Society
• /
• v.49 no.4
• /
• pp.389-398
• /
• 2005

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.180-183
• /
• 2001

본 논문에서는 N개의 평행 결합선로를 이용한 3dB 결합기를 해석하였으며, 유도된 식에 의하여 최소의 단수와 크기로 3dB 결합기를 설계하였다. 기존의 Spectral Domain상에서 N단 평행 결합선로의 복잡한 관계식 유도를 S 파라미터 관계식으로 간단히 유도 하였으며, 유도된 식의 타당성을 위해 실제 제작 검증하였다. 제작된 결합기는 Loose coupling의 평행 결합 선로의 광대역 특성을 그대로 이용하기 때문에 Lange Coupler와 같은 높은 임피던스와 Tight coupling을 구현 할 필요가 없으며, wire bonding도 용이하게 된다. 최소의 단수로 구현하기 위해 RT/Duroid의 R06006과 같은 높은 유전율과 두꺼운 기판을 사용하여 2단으로 3dB 구현이 가능하게 하였다. 제작결과 3.6GHz에서5.5GHz로 대략 42%(0.5dB imbalance) 정도의 광대역특성을 가지고 위상오차도 1$^{\circ}$내외의 결합기를 구현할 수 있었고 격리도 특성 또한 대역 내에서 15dB 내외의 특성을 보였다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.20 no.2
• /
• pp.151-161
• /
• 2016

In this paper, we present a $C^3$ quartic B-spline approximation of circular arcs. The Hausdorff distance between the $C^3$ quartic B-spline curve and the circular arc is obtained in closed form. Using this error analysis, we show that the approximation order of our approximation method is six. For a given circular arc and error tolerance we find the $C^3$ quartic B-spline curve having the minimum number of control points within the tolerance. The algorithm yielding the $C^3$ quartic B-spline approximation of a circular arc is also presented.

• Korean Journal of Materials Research
• /
• v.9 no.10
• /
• pp.1037-1040
• /
• 1999

Magnetic characteristics of some anisotropic mischmetal- FeB- (Co,Ti,Al) permanent magnets have been investigated. The magnets were fabricated by using hot-pressed and die-upsetting. Hot-pressed $\textrm{(MM)}_{12.5}\textrm{Fe}_{71.9}\textrm{Co}_{5.0}\textrm{Al}_{2.0}\textrm{B}_{8.6}$ permanent magnet showed $\textrm{H}_{c}$=4.27 kOe, $\textrm{B}_{r}$=4.75 kG, $\textrm{(BH)}_{max}$=3.82 MGOe, and die- upset magnet showed $\textrm{H}_{c}$=3.10 kOe, $\textrm{B}_{r}$=5.58 kG, $\textrm{(BH)}_{max}$=5.34 MGOe, respectively. Hot-pressed $\textrm{(MM)}_{12.5}\textrm{Fe}_{77.9}\textrm{Ti}_{1.0}\textrm{B}_{8.6}$ permanent magnet showed $\textrm{H}_{c}$=3.75 kOe, $\textrm{B}_{r}$=4.64 kG, $\textrm{(BH)}_{max}$=2.78 MGOe, and die- upset magnet showed $\textrm{H}_{c}$=3.29 kOe, $\textrm{B}_{r}$=5.01 kG, $\textrm{(BH)}_{max}$=3.54 MGOe, respectively. X-ray diffraction and transmission electron microscopy revealed that the higher energy products in the die-upset magnets results from alignment of the c-axis along the die-upsetting direction. The magnetic anisotropy in hot-pressed MM-FeB- Al magnet is increased by the substitution of Co for Fe.

• Journal of Navigation and Port Research
• /
• v.27 no.4
• /
• pp.437-441
• /
• 2003

In this paper, the 30 W power amplifier for an IMT-2000 repeater was developed a gain flatness and the third IMD (Intermodulation distortion) by microwave absorber. The absorption ability of the absorber is shown up to -10 dB and -4 dB at 3.6 GHz, 2.3 GHz band, respectively. The power amplifier without absorber has the gain over 57 dB, the gain flatness of $\pm$0.33 dB and the third IMD of 27 dBc at 33.3 W output. Otherwise, the power amplifier with absorber has the gain over 58 dB, the gain flatness of less than $\pm$0.9, the third IMD over 29 dBc at the same output power. As a result, the characteristic of the different type shows improvement of 1 dB in gain, 0.3 dB in gain flatness and 1.77 dBc in IMD.

• Journal of the Korean Ceramic Society
• /
• v.25 no.6
• /
• pp.609-614
• /
• 1988

This study was carried out to investigate the effects of B4C or Y2O3 additives on the tendency of sintering, $\beta$-SiC synthesis and mineral phase changes by reaction bonding of SiC at 145$0^{\circ}C$. At the sintering temperature of 145$0^{\circ}C$, the additives such as B4C or Y2O3 did not improved porosity and bending strength. Added more than 1.5% of Y2O3, 0.5-0.3% of B4C, the formation of $\beta$-SiC was increased. At higher temperature above 145$0^{\circ}C$, it seems that the bodies added B4C, contained 3C form of SiC were denser than that of Y2O3 added. Because the transition of 3Clongrightarrow4Hlongrightarrow6H promoted sintering.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1993.11a
• /
• pp.54-55
• /
• 1993

• Journal of Korean Society of Forest Science
• /
• v.105 no.4
• /
• pp.441-448
• /
• 2016

The purpose of this study was to broaden our knowledge on the productivity and costs of felling operation in three different harvesting methods(whole tree, tree-length and cut-to-length). Felling was conducted in three different harvesting methods with two workers who have different work experiences. Worker A and B have had felling experiences for about 5 years and 15 years, respectively. Felling productivity in whole tree method was $10.3m^3/SMH$ for worker A and $12.7m^3/SMH$ for worker B. Felling costs for worker A and B were $2,066won/m^3$ and $2,201won/m^3$, respectively. Although felling productivity of worker B in whole tree method was higher than worker A, felling costs of worker A were similar to worker B because the wage of worker B was more expensive than the wage of worker A (p>0.05). In tree-length method, felling cost of worker B were cheaper than that of worker A. Felling productivity and cost in tree-length method were $2.2m^3/SMH$ and $9,890won/m^3$ for worker A and $3.3m^3/SMH$ and $8,459won/m^3$ for worker B, respectively (p<0.05). In cut-to-length method, felling productivity and cost were $2.3m^3/SMH$ and $9,584won/m^3$ for worker A and $3.0m^3/SMH$ and $9,395won/m^3$ for worker B, respectively. Felling productivity of worker B was higher than that of worker A(p>0.05). Our preliminary results found that harvesting methods and worker's experiences highly affect on the productivity and costs of felling operations. These results should be useful for forest managers when planning cost-effective harvesting operations.

• Nuclear Engineering and Technology
• /
• v.52 no.9
• /
• pp.1917-1925
• /
• 2020

New versions of ENDF/B and JEFF data libraries have been released during the past two years with significant updates in the neutron reaction sublibrary and the thermal neutron scattering sublibrary. In order to get a more comprehensive impression of the criticality quality of these two latest neutron data libraries, and to provide reference for the selection of the evaluated nuclear data libraries for the science and engineering applications of the Reactor Monte Carlo code RMC, the criticality benchmarking of the two latest neutron data libraries has been performed. RMC was employed as the computational tools, whose processing capability for the continuous representation ENDF/B-VIII.0 thermal neutron scattering laws was developed. The RMC criticality validation suite consisting of 116 benchmarks was established for the benchmarking work. The latest ACE format data libraries of the neutron reaction and the thermal neutron scattering laws for ENDF/B-VIII.0, ENDF/B-VII.1, and JEFF-3.3 were downloaded from the corresponding official sites. The ENDF/B-VII.0 data library was also employed to provide code-to-code validation for RMC. All the calculations for the four different data libraries were performed by using a parallel version of RMC, and all the calculated standard deviations are lower than 30pcm. Comprehensive analyses including the C/E values with uncertainties, the δk/σ values, and the metrics of χ² and < |Δ| >, were conducted and presented. The calculated keff eigenvalues based on the four data libraries generally agree well with the benchmark evaluations for most cases. Among the 116 criticality benchmarks, the numbers of the calculated keff eigenvalues which agree with the benchmark evaluations within 3σ interval (with a confidence level of 99.6%) are 107, 109, 112, and 113 for ENDF/B-VII.0, ENDF/B-VII.1, ENDF/B-VIII.0 and JEFF-3.3, respectively. The present results indicate that the ENDF/B-VIII.0 neutron data library has a better performance on average.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.20 no.1
• /
• pp.17-22
• /
• 1984

The author carried out an experiment to find on the optomotor response of crusian carp, Carassius carassius and goldfish, Carassius auratus in accordance with the colors of the wall and the stripes labeled on the revolving visual screen. The results are as follows; 1. The optomotor response rate of crusian carp was 80% or more in case of B-Y, R-Bl and W-Bl pair of colors, and 50% or less in case of Bl-B, B-Bl, R-W, R-Y, W-Y and Y-W pair. 2. The optomotor response rate of goldfish was 80% or more in all except B-Bl, W-R and W-Y pair. 3. Mean round number of crusian carp was 7.5-9.5 revolutions in case of W-Bl, Y-Bl, W-B and Y-B pair, and 1.8-3.9 revolutions in case of Bl-B, Bl-Y, B-Bl, B-R, R-All and Y-W pair for 3 minutes. 4. Mean rounded number of goldfish was only 4.1-4.9 revolutions in case of W-Bl, W-B and Y-B pair for 3 minutes.