• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.53 no.3
• /
• pp.368-381
• /
• 2020

This study was conducted to optimize the processing conditions of seasoned laver Pyropia yezoensis with conger eel Conger myriaster seasoning sauce (CES) using response surface methodology (RSM). The RSM program results for bonesoftness showed that the optimum independent variables based on the dependent variables (Y₁, lipid removal rate; Y₂, texture; and Y₃, sensory fish odor score) were 431.0% for X₁ (water amount), 115.6℃ for X₂ (retort-operated temperature), and 50.1 min for X₃ (retort-operated time). The RSM program results for the CES blend showed that the optimum independent variables (X₁, amount of bone-softened conger eel by-products; X₂, mixed sauce amount; and X₃, starch amount) based on the dependent variables (Y₁, amino-N; Y₂, Hunter redness; and Y₃, drying time) were 44.8% for A (pre-treated conger eel by-product), 36.0% for B (mixed sauce), and 19.2% for C (starch). The RSM program results for seasoned laver with CES showed that the optimum independent variables based on the dependent variables (Y₁, water activity; Y₂, Hunter yellowness; and Y₃, overall acceptance) were 5.0% for X₁, (CES amount), 313.8℃ for X₂ (roasting temperature), and 6.0 s for X₃ (roasting time). The seasoned laver with CES prepared under the optimum conditions was superior to commercial seasoned laver in terms of overall acceptance.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.2
• /
• pp.63-69
• /
• 2012

Recently, the cement industries brought very severe environment problems such as resource depletion and global warming with massive carbon dioxide during its production. The number of cases using industrial by-products such as the ground granulated blast furnace slag (GGBFS) in concrete mixtures is increasing to resolve the environmental issue. GGBFS is mainly used in the range between 20 to 50% to replace cement, but nowadays lots of researches are carried out to develop the alkali-activated slag (AAS) concrete with no cement. In this study, the early age properties of alkali activated slag (AAS) mortar are investigated to obtain the fundamental data for AAS concrete application to structural members. The experimental variables were the water-binder ratios of 0.3, 0.4, and 0.5 and NaOH as the alkali activator of 4%, 8%, and 12% by the mass of GGBFS, and compressive strength, flow, setting time, and ultrasonic pulse velocity of AAS mortars were measured and analyzed. It is found from the test results that as the normal concrete the lower W/B, the higher compressive strength. However, superplasticizer has to be used for producing high strength AAS concrete because the workability of AAS mortar are significantly lowered.

• International Journal of Concrete Structures and Materials
• /
• v.8 no.3
• /
• pp.213-228
• /
• 2014

Alkali-activated binder (AAB) is recently being considered as a sustainable alternative to portland cement (PC) due to its low carbon dioxide emission and diversion of industrial wastes and by-products such as fly ash and slag from landfills. In order to comprehend the behavior of AAB, detailed knowledge on relations between microstructure and mechanical properties are important. To address the issue, a new approach to characterize hardened pastes of AAB containing fly ash as well as those containing fly ash and slag was adopted using scanning electron microscopy (SEM) and energy dispersive X-ray spectra microanalyses. The volume stoichiometries of the alkali activation reactions were used to estimate the quantities of the sodium aluminosilicate (N-A-S-H) and calcium silicate hydrate (CSH) produced by these reactions. The 3D plots of Si/Al, Na/Al and Ca/Si atom ratios given by the microanalyses were compared with the estimated quantities of CSH(S) to successfully determine the unique chemical compositions of the N-A-S-H and CSH(S) for ten different AAB at three different curing temperatures using a constrained nonlinear least squares optimization formulation by general algebraic modeling system. The results show that the theoretical and experimental quantities of N-A-S-H and CSH(S) were in close agreement with each other. The $R^2$ values were 0.99 for both alkali-activated fly ash and alkali-activated slag binders.

• Journal of Biosystems Engineering
• /
• v.41 no.4
• /
• pp.319-327
• /
• 2016

Purpose: Automated guidance systems (AGSs) for mobile farm machinery have several advantages over manual operation in the crop production industry. Many researchers and companies have tried to develop such a system. However, it is not easy to evaluate the performance of an AGS because there is no established device used to evaluate it that complies with the ISO 12188 standard. The objective of this study was to develop a tracking sensor system using five laser distance measurement sensors. Methods: One sensor-for long-range distance measurement-was used to measure travel distance and velocity. The other four sensors-for mid-range distance measurement-were used to measure lateral deviation. Stationary, manual driving, and A-B line tests were conducted, and the results were compared with the real-time kinematic differential global positioning system (RTK-DGPS) signal used by the AGS. Results: For the stationary test, the average error of the tracking sensor system was 1.99 mm, and the average error of the RTK-DGPS was 15.19 mm. For the two types of driving tests, the data trends were similar. A comparison of the changes in lateral deviation showed that the data stability of the developed tracking system was better. Conclusions: Although the tracking system was not capable of measuring long travel distances under strong sunlight illumination because of the long-range sensor's limitations, this dilemma could be overcome using a higher-performance sensor.

• Food Science and Industry
• /
• v.55 no.2
• /
• pp.154-165
• /
• 2022

Humans have been breeding the mulberry silkworm for the long period of time to obtain silk fabric and nutrient-rich pupae. Currently, silkworm larvae, pupae, and silk-Fibroin hydrolysates are registered as food raw materials, while silkworm feces and Bombyx batryticatus are registered as Korean traditional medicines. Among sericulture products, individually recognized health functional food ingredients include silk-protein acid-hydrolysates for immunity enhancement, Fibroin-hydrolysates for memory improvement, and freeze-dried 5^th instar and 3^rd-day-silkworm powder for lowering-blood sugar. Recently, HongJam produced by steaming and freeze-drying mature silkworms were reported to have various health-promoting effects such as preventing the onset of Alzheimer's disease and Parkinson's disease, enhancing gastro-intestinal functions, improving skin-whitening and hair growth, and extending healthspan. By consuming silkworm products with various health-promoting effects, it is possible to increase the healthspan of human beings, thereby reducing personal and national medical expenses, resulting in increasing the individual's happiness.

• Journal of the Korea Concrete Institute
• /
• v.25 no.6
• /
• pp.657-665
• /
• 2013

The purpose of this study is the basic research of self-compacting concrete using Alkali-Activated Slag (AAS) binder in order to emphasize the durability of structures and facilitate casting the fresh concrete in field. The AAS binder emitted low carbon dioxide ($CO_2$) is eco friendly material of new concept because AAS products not only emit little $CO_2$ during production but also reuse the industrial by-products such as ground granulated blast-furnace slag (GGBS) of the steel mill. Until now, almost of domestic and foreign research are using Ordinary Portland Cement (OPC) for self-compacting concrete, and also, nonexistent research about AAS. The self-compacting concrete must get the performance of flowability, segregation resistance, filling and passing ability. Nine concrete mixes were prepared with the main parameter of unit amount of binder (400, 500, 600 $kg/m^3$) and 3 types of water-binder (W/B) ratio. The results of test were that fresh concretes were satisfied with flowability, segregation resistance, and filling ability of JSCE. But the passing ability was not meet the criteria of EFNARC because of higher viscosity of AAS paste than OPC. This high viscosity of AAS paste enables the manufacturing of self compacting concrete, segregation of which does not occur without the using of viscosity agent. It is necessary that the development of high fluidity AAS binders of higher strength and the study of better passing ability of AAS concrete mixes in order to use self compacting AAS concrete in field.

• Korean journal of applied entomology
• /
• v.57 no.4
• /
• pp.393-399
• /
• 2018

A loop-mediated isothermal amplification (LAMP) primer set (WBPH-65) was designed for the species-specific detection of white-backed planthopper (WBPH) Sogatella furcifera based on the full-length sequence of the internal transcribed spacer 2 (ITS2) (KC417469.1). The WBPH-65 primer set consists of six primers (total 165 bp), F3 (18 bp), B3 (18 bp), FIP (43 bp), BIP (40 bp), LF (21 bp), and LB (25 bp). After the LAMP reaction of three rice planthoppers, S. furcifera, Nilaparvata lugens, and Laodelphax striatellus, with the WBPH-65 primer set for 60 min at $65^{\circ}C$, the LAMP products were observed in the genomic DNA of S. furcifera only. According to the DNA amount of S. furcifera and incubation duration at $65^{\circ}C$, the difference of fluorescence relative to the negative control (0 ng) was clearly observed in a 40-min incubation with 10 and 100 ng or in case of 60-min incubation with 0.01, 0.1, 1, 10, and 100 ng. There was little difference in fluorescence between the negative control and all the other DNAs tested in 20- and 30-min incubations. On the other hand, the WBPH-65 primer set without LF and LB primers showed little amplification in the genomic DNAs of the three rice planthoppers, S. furcifera, N. lugens, and L. striatellus in a 60-min incubation. These results suggest that all six primers (F3, B3, FIP, BIP, LF, and BF) are necessary for the WBPH-65 primer set to detect S. furcifera within a 60-min incubation, and is able to discriminate S. furcifera from at least N. lugens and L. striatellus.

• The Korean Journal of Pesticide Science
• /
• v.11 no.2
• /
• pp.95-105
• /
• 2007

The aim of this study was to determine the residual amounts of PAHs in environmental samples such as crop, soil and water collected from paddy, upland fields and forestlands near industrial zone and/or a thermal power plant in South Korea. All of the samples were analyzed by GC-mass spectrometer. The average contents of total PAHs in soil samples were 140.2 ${\mu}g\;kg^{-1}$ and the range was from 4.3 to $662.9{\mu}g\;kg^{-1}$. The detection of benzo(a)anthracene, chrysene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(a)pyrene and dibenzo(a,h) anthracene which have strong carcinogenecity was ranged from 14.2 to 167.8 ${\mu}g\;kg^{-1}$. The residual amounts and detection frequency of PAHs in soil samples from the iron and heavy industrial areas near Pohang and Busan were 3-folds more than those of the other areas. Amounts of PAHs in upland soil samples was 1.5 folds higher than those of paddy soil samples, suggesting that it may be related to the content of organic matter in soil. The average contents of total PAHs in crop samples were 9.7 ${\mu}g\;kg^{-1}$ which ranged from 4.5 to 52.2 ${\mu}g\;kg^{-1}$. However, the residual amounts of PAHs in water samples were not detected. These results showed that soils and crops were slightly contaminated with PAHs. Therefore, the investigation should be continued for evaluating a safety or risk assessment through expansion of regions and crops.

• The Korean Journal of Food And Nutrition
• /
• v.32 no.3
• /
• pp.226-235
• /
• 2019

In this study, the product characteristics and physicochemical properties were investigated through collection of commercial porridge. The addition rate of grain raw materials was about 6.5~11.75%, glutinous rice was added at a rate of about 23~60% to improve the viscosity and various other food additives were used. The moisture content characteristics varied among the products. The rotational viscosity of CP (Commercial Porridge)4 was the highest at 39,054 cP, while the flow viscosity of CP3 was least at 4.80 cm/30 seconds. The starch content differed among the products in the range of total starch 6.96~8.08%, amylose 1.41~2.61%, total sugar 6.55~12.81% and reducing sugar 0.50~0.99%. Particularly, total sugar showed a very high correlation (-0.920) while rotational viscosity and color value (b) showed significant correlation with most of the properties i.e. moisture, solids content etc. There was a rapid increase in the reactivity of starch degrading enzyme at the early stage of the reaction which gradually decreased with time. The physicochemical characteristics of commercial porridge presented in this study could be expected to increase the industrial use value of the related research because it considers the quality of the currently commercialized porridge for the future selection of suitable porridge raw materials.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.4 no.2
• /
• pp.3-11
• /
• 1998

Coating was carried out on liner components of B flute, single-wall corrugated board(SK180/S120/K200) to examine the effect of liner component coatings by oxidized starch on the properties of corrugated board. Both bursting strength and edgewise compression strength(ECS) of corrugated board were improved by coating of its liner components with oxidized starch. Bursting strength of corrugated board rapidly increased with an initial increase of coating weight, but as the coating weight further increased, there was no increase in bursting strength. The results showed 30.3% improvement for $2.32g/m^2$ coating on outside liner component, 36.8% improvement for $4.84g/m^2$ coating on inside liner component and 39.9% improvement for $7.16g/m^2$ coating on both liner components in bursting strength of corrugated board. Regardless of treated liner components, ECS of corrugated board was improved by coating of oxidized starch, and especially greater improvement was accomplished when corrugated board was coated on inside liner component or both liner components at low level of coating weight - 11.3% improvement for $1.58g/m^2$ coating on Inside liner component and 11.9% improvement for $2.99g/m^2$ coating on both liner components.