• Advances in aircraft and spacecraft science
• /
• 제2권1호
• /
• pp.17-44
• /
• 2015

A modular multidisciplinary analysis and optimization framework has been built with the goal of performing conceptual design of an advanced efficient supersonic air vehicle. This paper addresses the specific challenge of designing this type of aircraft for a long range, supersonic cruise mission with a payload release. The framework includes all the disciplines expected for multidisciplinary supersonic aircraft design, although it also includes disciplines specifically required by an advanced aircraft that is tailless and has embedded engines. Several disciplines have been developed at multifidelity levels. The framework can be readily adapted to the conceptual design of other supersonic aircraft. Favorable results obtained from running the analysis framework for a B-58 supersonic bomber test case are presented as a validation of the methods employed.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2001년도 가을 학술발표논문집 Vol.28 No.2 (1)
• /
• pp.766-768
• /
• 2001

정보통신 기술의 비약적인 발전으로 인해 인터넷은 현재 필수 불가결한 생활의 도구가 되고 있으며, 개인 및 기업에서의 인터넷 활용이 급증함에 따라 인터넷 그 자체를 사업수단으로 이용하는 추세가 가속화 되고 있다. 또한, 최근 차세대 웹 표준문서 포맷으로 부상되고 있는 XML(eXtensible Markup Language)을 사용한 B2B 전자상거래 표준인 ebXML(e-business eXtensible Markup Language), Microsoft의 Biztalk Framework CommerceNet와 eCo Framework XML/EDI 등의 개발이 활발히 진행되고 있다. 이에 본 논문에서는 기업 간 문서교환을 위한 XML 전자상거래 시스템을 구현하고, 전체 시스템 내에서 보안상의 요구를 충족하기 위하여 W3C(World Wide Web Consortium)외 XML 전자서명(Xml-Dsig : Disital Signature) 표준에 입각한 기업 간 문서 교환시의 인증 및 보안을 위한 시tm템을 설계하였다.

• Composites Research
• /
• 제35권1호
• /
• pp.31-37
• /
• 2022

본 연구에서는 복합재료 블레이드의 최적 구조설계 프레임워크를 개발하고 이를 헬리콥터 블레이드에 적용하여 구조설계를 수행하였다. 개발된 최적 설계 프레임워크는 유전자 알고리즘과 입자 군집 최적화 알고리즘을 결합한 PSGA를 활용해 구성하였다. 이는 블레이드 단면에 대한 유한요소 모델 생성, 2차원 단면 유한요소 해석, 그리고 1차원 회전 보 해석의 단계를 거쳐 최적화 결과를 도출해낸다. 설계 과정에서 각 단면들은 B-spline으로 구성되며, 유한요소 생성 프로그램인 Gmsh를 활용해 모델링 된다. 이를 활용하여 최적화 과정에서 각 변수마다 대응되는 2차원 유한요소모델을 생성해 블레이드의 구조해석을 수행했다. 본 연구에서 제안한 프레임워크를 HART II 블레이드에 적용하여 최적 구조 설계를 수행했다. 최적 설계 결과 회전익 로터에서 요구하는 구조적 특징을 유지하면서, 공진회피와 질량 등의 조건이 개선된 블레이드 형상을 도출하였다.

• Geomechanics and Engineering
• /
• 제34권6호
• /
• pp.697-726
• /
• 2023

Brittleness as an important property of rock plays a crucial role both in the failure process of intact rock and rock mass response to excavation in engineering geological and geotechnical projects. Generally, rock brittleness indices are calculated from the mechanical properties of rocks such as uniaxial compressive strength, tensile strength and modulus of elasticity. These properties are generally determined from complicated, expensive and time-consuming tests in laboratory. For this reason, in the present research, an attempt has been made to predict the rock brittleness indices from simple, inexpensive, and quick laboratory test results namely dry unit weight, porosity, slake-durability index, P-wave velocity, Schmidt rebound hardness, and point load strength index using multiple linear regression, exponential regression, support vector machine (SVM) with various kernels, generating fuzzy inference system, and regression tree ensemble (RTE) with boosting framework. So, this could be considered as an innovation for the present research. For this purpose, the number of 39 rock samples including five igneous, twenty-six sedimentary, and eight metamorphic were collected from different regions of Iran. Mineralogical, physical and mechanical properties as well as five well known rock brittleness indices (i.e., B₁, B₂, B₃, B₄, and B₅) were measured for the selected rock samples before application of the above-mentioned machine learning techniques. The performance of the developed models was evaluated based on several statistical metrics such as mean square error, relative absolute error, root relative absolute error, determination coefficients, variance account for, mean absolute percentage error and standard deviation of the error. The comparison of the obtained results revealed that among the studied methods, SVM is the most suitable one for predicting B₁, B₂ and B₅, while RTE predicts B₃ and B₄ better than other methods.

• 대한치과보철학회지
• /
• 제45권2호
• /
• pp.216-227
• /
• 2007

Statement of problem: For the long-term success of removable partial dentures, the bonding between metal framework and denture base resin is one of the important factors. To improve bonding between those, macro-mechanical retentive form that is included metal framework design has been generally used. However it has been known that sealing at the interface between metal framework and denture base resin is very weak, because this method uses mechanical bonding. Purpose: Many studies has been made to find a simple method which induces chemical bond, now various bonding system is applied to clinic. In this experiment, shear bond strengths of heat-cured denture base resin to the surface-treated Co-Cr alloy were measured before and after thermocycling. Chemically treated groups with Alloy $Primer^{TM}$, Super-Bond $C&B^{TM}$, and tribochemically treated group with $Rocatec^{TM}$ system were compared to the beadtreated control group. The data were analyzed with two-way ANOVA. Result: 1. Shear bond strength of bead-treated group is highest, and Alloy $Primer^{TM}$ treated group, Super-Bond $C&B^{TM}$ treated group, RocatecTM system treated group were followed. Statistically significant differences were found in each treated group(p<0.05). 2. Surface treatment and thermocycling affected shear bond strength(p<0.05), however there was no interaction between two factors(p>0.05). 3. Shear bond strengths of bead-treated group and Alloy $Primer^{TM}$ treated group showed no statistically significant difference before and after thermocycling(p>0.05), and those of Super-Bond $C&B^{TM}$ treated group and $Rocatec^{TM}$ system treated group showed statistically significant difference after thermocycling(p<0.05).

• 산업기술연구
• /
• 제24권A호
• /
• pp.47-57
• /
• 2004

Industrial efforts for increased market sales have directed towards the development and implementation of on-line marketing systems under recent e-business environment. Internet-based shopping mall is one of the most popular system. A business process model for an intermediary type shopping mall using IDEF0 has been presented in this study. Specific efforts have been focused on defining and analyzing a diversity of business processes embedded in practical B2B and B2C mall system operations. We first briefly examined the considered system with IDEF0 design. We then defined fundamental business processes within shopping mall systems. Upon careful examination and analysis of them, a detailed business process model based on IDEF methodology has been designed. The results in this study may well form a conceptual framework for shopping mall development and operations.

• 한국시스템다이내믹스연구
• /
• 제5권1호
• /
• pp.99-110
• /
• 2004

Building trust assurance particularly in case of commercial practices in cyber space without physical contact is a very complex task to tackle. Several factors are interrelated in not necessarily technical but also societal dimensions over the entire process of e-commerce firm ex-ante through ex-post transactions. This paper attempts first to brief the substance of e-trust and examine the natuure of its complexity by using system dynamics simulation technique, followed by its current address and the future directions to move. A framework of 3 x 3 matrixes is deviaed and the key issues of e-trust are mapped into cross-cells of the table. The paper also includes some possible suggestions on the matter of trust assurance especially for B2C and B2B in policy wise and organizational perspective from the context of international collaboration.

• The Journal of Advanced Prosthodontics
• /
• 제5권4호
• /
• pp.448-451
• /
• 2013

PURPOSE. Translucency of all-ceramic restorations is an important factor which affects the final appearance and esthetic outcome of the restoration. The aim of this study was to evaluate the effect of the shade of coloring liquid on the translucency of zirconia framework. MATERIALS AND METHODS. Thirty zirconium oxide core plate ($15{\times}12{\times}0.5$ mm) were divided into 6 groups of 5 plates each. Each group was classified according to the shade of coloring liquid based on Vita Classic Scale (A2, A3, B1, C2, and D2), and each sample was immersed in coloring liquid for 3 seconds as recommended by the manufacturer, except for the control group. Contrast ratio, as a translucency parameter, was calculated using a spectrophotometer and the data were analyzed with oneway analysis of variance (ANOVA) and Tukey's honestly significant differences (HSD) tests (${\alpha}$=.05). RESULTS. Significant differences in translucency among the control and test groups, and the B1 shaded group and other shades was observed. There were no significant differences among A2, A3, C2, and D2 shaded groups. CONCLUSION. The translucency of the zirconium oxide cores was affected by the coloring procedure and significant differences in the translucency measurements were identified between specific shades.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권2호
• /
• pp.726-741
• /
• 2022

The purpose of this study is to provide instructive theoretical models for art (music) education institutions especially when unpredictable risks, such as pandemics, occur again. Based on the customer behavior theory of the business-to-business-to-customer (B2B2C) platform, and in combination with the technology acceptance model (TAM) and expectation confirmation model (ECM), this study proposes an online education model from the perspective of art education. The framework is based on the three decision-making processes of the customer, and includes the product owner, content owner, and customer area. This paper highlights the factors that influence customers in making decisions when art education institutions are product owners. Regression analysis was introduced to study the factors influencing the expectation confirmation, and the overall fitting testing and six hypotheses testing of 385 effective samples were performed using the structural equation modeling (SEM). The results show that the course-design and after-service positively influenced the expectation confirmation, and the domain image positively influenced the continuance behavior. Negative emotions skipped the mediator (expectation confirmation) and directly exerted a significant negative impact on customers' willingness to continue system usage (continuance behavior). In addition, expectation confirmation positively influenced continuance behavior. The paths of detailed items comprising course-design, after-service, and negative emotion were also analyzed and discussed. In this path analysis, ordinary art learners did not believe that AI partners can play a very good auxiliary role. The findings contribute to the scope of information systems acting as an art education platform academically, and provide effective and theoretical support for the actual operation of art education institutions.

• 한국자기공명학회논문지
• /
• 제9권2호
• /
• pp.138-154
• /
• 2005

Vanadium-incorporated aluminophosphate molecular sieve $VO^{2+}-SAPO-5$ was studied by electron spin resonance (ESR) and electron spin echo modulation (ESEM) spectroscopies to determine the vanadium structure and interaction with various adsorbate molecules. It was found that the main species at low concentration of vanadium is a monomeric vanadium units in square pyramidal or distorted octahedral coordination, both in oxidation state (IV) for the calcined hydrated material and in oxidation state (V) for the calcined material. After calcinations in $O_2$ and exposure to moisture, only species A is observed with reduced intensities. It is suggested as a $VO(H_2O)_3^{2+}$ complex coordinated to two framework oxygen bonded aluminum. When calcined, hydrated $VO^{2+}-}SAPO-5$ is dehydrated at elevated temperature, a species loses its water ligands and transforms to $VO^{2+}$ ions coordinated to two framework oxygens (species B). Species B reduces its intensity, significantly after treatment with $O_2\;at\;600^{\circ}C$ for 5 h, thus suggesting oxidation of $V^{4+}\;to\;V^{5+}$. When dehydrated $VO^{2+}-SAPO-5$ contacts with $D_2O$ at room temperature, the EPR signal of species A is observed. Thus species assumed as a $VO^{2+}(O_f)_2(D_2O)_3$, by considering two framework oxygens. Adsorption of deuterated ethanol, propanol on dehydrated $VO^{2+}_{-}SAPO-5$ result in another new vanadium species E and F, respectively, which are identified as a $VO^{2+}-(CH_3CH_2OD)_3,\;VO^{2+}-(CH_3CH_2CH_2OD)_2$ complex. When deuterated benzene is adsorbed on dehydrated $VO^{2+}-SAPO-5$, another new vanadium species G, identified as a $VO^{2+}-(C_6D_6)$ is observed. Possible coordination geometries of these various complexes are discussed.