• 제목/요약/키워드: B-modulation

검색결과 989건 처리시간 0.03초

다색광전달함수를 사용한 컬러 LCD 모니터의 광학적 상평가법 (Image quality assessment of color LCD monitors by polychromatic modulation transfer function)

  • 송종섭;조재흥;홍성목;이윤우;양호순;조현모;이인원
    • 한국광학회지
    • /
    • 제16권1호
    • /
    • pp.63-70
    • /
    • 2005
  • 컬러 LCD(liquid crystal display) 모니터의 광학적 상에 대한 성능을 평가하기 위하여 LCD 모니터를 포함한 모든 광학계의 파장별 공간주파수 반응에 가중치를 부여한 진폭전달함수(modulation transfer function ; MTF)를 이용한 다색광전달함수(polychromatic modulation transfer function ; PMTF)를 제안한다. 서로 다른 진폭들을 갖는 적색(R), 녹색(G), 청색(B)의 3개의 막대형 LCD 단위물체를 이용한 컬러 LCD의 PMTF의 시뮬레이션 결과와 실험적 결과가 잘 일치하며, 이 결과 컬러 LCD의 결상성능은 단색으로 측정하는 MTF 및 가시광의 전파장대를 사용하는 백색광 MTF와는 다른 R, G, B의 3색에 대한 PMTF로 측정하늘 것이 보다 적절하다.

차세대 MIMO 이동통신에서 적응변조시스템의 성능분석 (Adaptive Modulation and Coding of MIMO in Next Generation Mobile Systems)

  • 강성진;장태원;유영환;황인태;강민구;강창언
    • 인터넷정보학회논문지
    • /
    • 제4권5호
    • /
    • pp.1-9
    • /
    • 2003
  • 본 논문에서는 CDMA 시스템에서 적응 변조 및 부호화 (AMC) 기법의 성능을 향상시키기 위한 방안으로서 기지국과 단말기 간에 개루프 및 폐루프 전송 다이버시티를 적용하였다. 이는 전송 다이버시티를 적용하여 수신 단의 신호 대 잡음비 (SNR)를 개선함으로써, 보다 높은 전송률을 지원하는 변조 및 부호화 레벨이 선택될 확률을 증가시키고 이에 따른 평균 전송률의 이득을 얻고자 하는 것이다. 개루프 전송 다이버시티로는 시공간 블록 부호화 기반 전송 다이버시티 (STTD) 기법을, 폐루프 전송 다이버시티로는 선택적 전송 다이버시티 (STD) 기법을 적용하였다. 모의 실험 결과, AMC 기법과 전송 다이버시티를 결합함으로써 기존 시스템에 비하여 향상된 전송률을 얻을 수 있었다. 단일 경로 레일리 페이딩 채널 환경에서 두 개의 전송 안테나를 사용한 AMC-STTD는 9dB신호 대 잡음비에 대하여 기존의 AMC 기법보다 약 250kbps의 전송률 이득을 보였다. 또한 두 개의 전송 안테나를 사용한 AMC-STD의 경우는 역시 9dB 신호 대 잡음비에서 약 420kbps의 전송률 이득이 얻어짐을 확인하였다.

  • PDF

CDMA 통신용 IS-95A/B, IS-95C 서비스의 Cell 확대를 위한 광중계기 연결보조장치 (IS-95C coupler for Optical repeater for Cell extension of IS-95A/B & IS-95C service)

  • 정재성;김부곤;이용국
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2001년도 종합학술발표회 논문집 Vol.11 No.1
    • /
    • pp.39-43
    • /
    • 2001
  • A system, IS-95C coupler that combines the signals of IS-95A/B and IS-95C BTS and compensates the differences between the signals of two systems and connected to optical repeater If no IS-95C coupler exist, Optical repeater can't service of signal balanced. A system carries on combination, amplification, level modulation function of the TX signals(IS-95A/B & IS-95C) and division and level modulation function of the RX signals. Isolation satisfied above 100dB.

  • PDF

독립적인 MCS 레벨 선택 방식이 적용된 AMC-MIMO 결합 시스템의 성능 개선 (Performance Improvement of the Combined AMC-MIMO Systems with Independent MCS Level Selection Method)

  • 황인태;최광욱;류상진;이경환;유철우;홍대기;강민구;김철성
    • 인터넷정보학회논문지
    • /
    • 제8권1호
    • /
    • pp.47-55
    • /
    • 2007
  • 본 논문에서는 AMC-V-BLAST(Adaptive Modulation and Coding-Vertical-Bell-lab Layered Space-Time) 결합 시스템에 각 레이어 별로 공통적인 MCS(Modulation and Coding Scheme) 레벨을 적용한 경우와 독립적인 MSC 레벨을 적용한 경우의 시스템 구조를 제시 후 성능을 관찰한다. 그리고 공통적인 MCS 레벨이 적용된 결합 시스템의 성능에 비하여 독립적인 MCS 레벨이 적용된 결합 시스템이 어느 정도의 전송률 향상이 있는가를 살펴본다. 실험결과, 독립적인 MCS 레벨이 적용된 경우가 레이어 별로 각 채널상태에 따라 최대한의 전송률을 얻기 위한 변조 및 코딩 방식이 선택되므로 공통 MCS 레벨을 적용한 경우에 비하여 전송률 성능이 우수함을 보였다. 특히, 약 $7dB{\sim}9dB$ SNR 구간에서 독립적인 MCS 레벨을 적용한 AMC-V-BLAST 결합 시스템의 경우가 공통적인 MCS 레벨을 적용한 경우에 비하여 약 700kbps의 전송률이 개선됨을 확인하였다. 또한, 수신다이버시티를 고려하며 MMSE 무효화 기법을 적용한 AMC-V-BLAST 결합 시스템의 경우 $7dB{\sim}9dB$ SNR 구간에 대하여 독립적인 MCS 레벨을 적용한 시스템과 공통적인 MCS 레벨을 선택한 시스템 간의 전송률 차이가 약 350kpbs 내외로 나타남을 확인할 수 있다.

  • PDF

유도전동기의 소음저감을 위한 DSP기반 PWM인버터의 랜덤 캐리어 주파수 변조기법의 구현 (Implementation of Random Carrier-Frequency Modulation Scheme for a DSP based PWM Inverter for Acoustic Noise Reduction of Induction Motors)

  • 정영국;나석환;임영철;정성기
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제52권12호
    • /
    • pp.608-615
    • /
    • 2003
  • This paper describes an implementation of a DSP (Digital Signal Processor) controlled random carrier frequency modulation for the PWM inverter for acoustic noise reduction of induction motors. Real-time generation of the random variable and RPWM(Random PWM) along with the speed control was achieved by DSP TMS320C31. The experimental results show that the voltage and current harmonics are spread to a wide band area and the power spectrum of the acoustic switching noise was spread to create a more appealing, less annoying sound. Also, the speed response of the implemented method and the conventional method is nearly similar to each other from the viewpoint of the v/f constant control.

2중 영 벡터 모드를 갖는 2상 개별 펄스 위치 변조기법 (A Two-Phase Separately Randomized Pulse Position PWM Technique with Double-Zero Vector Mode)

  • 김정근;오승열;정영국;임영철
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제53권12호
    • /
    • pp.739-750
    • /
    • 2004
  • In case while M(modulation index) is more than 0.7, the spectrum of motor voltage and current of a conventional two-phase SRP-PWM scheme are not reduced considerably. To solve the problems of a conventional two-phase SRP-PWM, this paper proposes a two-phase SRP-PWM(DZSRP-PWM) with double zero vector mode which zero vector is selected as V(111) in case of M >0.7, and zero vector is selected as V(000) if M < 0.7. For the validity of the proposed method, the PSIM simulations and experiments were achieved. And the simulation and experiment results show that the voltage and current harmonics all over the modulation index are spread to a wide band area.

TCM Without Constellation Expansion Penalty

  • Kaminsky, Edit J.;Ayo, James
    • Journal of Communications and Networks
    • /
    • 제4권2호
    • /
    • pp.90-96
    • /
    • 2002
  • We present a family of constant-amplitude constellations of even dimensions 8 and above. These constellations allow trellis coded modulation to be implemented without the usual penalty paid for constellation expansion. The new constellations are generated by concatenating either n QPSK points or n QPSK points rotated by 45 degrees, for any n $\geq$ 4. Our constellations double the number of points available for transmission without decreasing the distance between points and without increasing the average or peak energies, introducing asymmetry, or increasing the modulation level. Effective gains of 2.65 dB with minimum complexity through 6.42 dB with moderate complexity are demonstrated using the 8D constellation.

강제전류 싸이크로콘버터에 의한 유도전동기 벡터제어 (Vector Control of an Induction Motor with Forced Commutated Cycloconverter)

  • Gi Taek Kim
    • 전자공학회논문지B
    • /
    • 제32B권9호
    • /
    • pp.1239-1246
    • /
    • 1995
  • A forced commutated cycloconverter (FCC) is a direct ac-ac converter capable of providing simultaneous voltage and frequency transformations. In this paper, vector control of an induction motor controlling stator current with forced commutated cycloconverter is presented. The advantage of current control is that the stator dynamics are eliminated and high performance vector control can be achieved. A novel modulation method based on dq transformation techniques is presented. Proposed modulation strategy generates the low frequency modulation function by the instantaneous value of the desired output voltages not by the steady state values of output magnitude and output frequency. PI control and predictive control algorithm for current control are applied, and the validity of proposed method is confirmed through digital simulations. Simulation results of step response and torque distubance and current control are presented.

  • PDF

단일 전류 센서를 사용한 3상 PWM 정류기의 새로운 제어 (A New Control of Three-Phase PWM Rectifier with Single Current Sensor)

  • 이우철;현동석;이택기
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제48권8호
    • /
    • pp.440-447
    • /
    • 1999
  • This paper proposes a control method for three-phase PWM rectifier with only single current sensor in DC link side. A PWM modulation strategy for reconstructing three phase currents from the DC link current is given. The states of the retifier switch are modified so that all phase currents can be reconstructed in a switching period although one or two of active vectors is applied only for a short time. Therefore, a new current control using an adjustment scheme of the modulation signal for three-phase PWM rectifier will be discussed, and verified the experimental results.

  • PDF

Broadband Instantaneous Frequency Measurement System Based on the Dual Paths of the Stimulated Brillouin Scattering Effect

  • Jiahong Zhang;Weijie Liao
    • Current Optics and Photonics
    • /
    • 제7권4호
    • /
    • pp.378-386
    • /
    • 2023
  • A wideband instantaneous frequency measurement (IFM) system is been proposed, designed and analyzed. Phase modulation to intensity modulation conversion is implemented based on the stimulated Brillouin scattering (SBS) effect, and the microwave frequency can be measured by detecting the change in output power. Theoretical analysis shows that the frequency measurement range can be extended to 4fb by adjusting the two sweeping signals of the phase modulators with a difference of 2fb. The IFM system is set up using VPI transmission maker software and the performances are simulated and analyzed. The simulation results show that the measurement range is 0.5-45.96 GHz with a maximum measurement error of less than 9.9 MHz. The proposed IFM system has a wider measurement range than the existing SBS-based IFM system.