• Membrane Journal
• /
• v.27 no.1
• /
• pp.68-76
• /
• 2017

Flat membrane with $0.4{\mu}m$ pore size was prepared with PVdF (polyvinylidene fluoride) nanofiber, which has the advantages such as excellent strength, chemical resistance, non-toxicity, and incombustibility. The spiral wound module was manufactured with the flat membrane and a woven paper. Hybrid water treatment process was composed of the PVdF nanofibers spiral wound microfiltration and granular activated carbon (GAC) adsorption column. Effect of GAC packing mass was investigated by comparing the case of recycling or discharging the treated water using the synthetic solution of kaolin and humic acid. After each filtration experiment, water back-washing was performed, and recovery rate and filtration resistances were calculated. Also, effect of GAC adsorption was compared by measuring turbidity and $UV_{254}$ absorbance. As a result, there was no effect of GAC packing mass on turbidity treatment rate; however, the treatment rate of $UV_{254}$ absorbance was 0.7~3.6% for recycling the treated water, and increased to 3.2-5.7% for discharging the treated water. In the case of recycling the treated water, reversible filtration resistance ($R_r$) and irreversible filtration resistance ($R_{ir}$) trended to decrease as increasing GAC packing mass; however, total fitration resistance ($R_t$) was almost constant, and recovery rate of water back-washing trended to increase a little.

• International Journal of Automotive Technology
• /
• v.6 no.3
• /
• pp.221-227
• /
• 2005

Aim of this study is to investigate an aerodynamic effect of a drag-reducing device on a heavy-duty truck. The vehicle experiences two different kinds of aerodynamic forces such as drag and uplifting force (or downward force) as it is traveling straight forward at constant speed. The drag force on a vehicle may cause an increase of the rate of fuel consumption and driving instability. The rolling resistance of the vehicle may be increased as result of the negative uplifting or downward force on the vehicle. A device named roof-fairing system has been applied to examine the reduction of aerodynamic drag force on a heavy-duty truck. As for a engineering design information, the drag-reducing system should be studied theoretically and experimentally for the best efficiency of the device. Four different types of roof-fairing model were considered in this study to investigate the aerodynamic effect on a model truck. The drag and downward force generated by vehicle has been obtained from numerical calculation conducted in this study. The forces produced on four fairing models considered in this study has been compared each other to evaluate the best fairing model in terms of aerodynamic performance. The result shows that the roof-fairing mounted truck has bigger negative uplifting or downward force than that of non-mounted truck in all speed ranges, and drag force on roof-fairing mounted truck has smaller than that of non-mounted truck. The drag coefficient $(C_D)$ of the roof-fairing mounted truck (Model-3) is reduced up to $41.3\%$ than that of non-mounted trucks (Model-1). A downward force generated by a roof-fairing mounted on a truck is linearly proportional to the rolling resistance force. Therefore, the negative lifting force on a heavy-duty truck is another important factor in aerodynamic design parameter and should be considered in the design of a drag-reducing device of a tractor-trailer. According to the numerical result obtained from present study, the drag force produced by the model-3 has the smallest of all in all speed ranges and has reasonable downward force. The smaller drag force on model-3 with 2/3h in height may results of smallest thickness of boundary layer generated on the topside of the container and the lowest intensity of turbulent kinetic energy occurs at the rear side of the container.

• Korean Journal of Food Science and Technology
• /
• v.28 no.2
• /
• pp.285-291
• /
• 1996

The effect of various packaging methods on Kimchi quality was investigated in order to develop the packaging techniques for preventing commercial Kimchi Products from ination and explosion due to fermentative gas evolved during storage and distribution. Kimchi was packaged in different methods; atmospheric (AP), check-valved (CV), double (DP) and vacuum (VP) packaging. The quality of Kimchi during storage at $10^{\circ}C$ was evaluated ill terms of gas composition, free volume, pH, titratable acidity, color index, lactic acid bacteria and sensory properties. $O_2$ concentration decreased to about 1% at $6{\sim}8$ days of optimal ripening time in all packages except DP, in which it remained around 20%. $CO_2$ concentration reached $70{\sim}90%$ after $6{\sim}8$ days in AP, CV and DP, while it stayed around 10% in DP. The free volume in AP had typical sigmoidal curve similar to $CO_2$ concentration changes. It remained almost constant in CV and DP, but started to increase at the late stage of storage In VP. There was no significant influence of packaging methods on the other quality attributes such as pH, titratable acidity, color index (L.b/a), lactic acid bacteria count and sensory evaluation score. As results, it could be proposed to employ CV and DP method as the effective packaging techniques for preventing commercial Kimchi products from inflation.

• The Journal of the Korea Contents Association
• /
• v.15 no.5
• /
• pp.560-569
• /
• 2015

Crowd funding is the method of raising money for a project, companies from a large group of people via the Internet, in return for future products or equity. Kickstarter is the largest and most successful crowdfunding site where creative projects raise reward based funding. Drawing on dataset of 80,267 projects with combined funding over $1.3b from 8.1m people, this paper suggest that backer select project based on their preference on the project, instead profitability of the project. It suggests that well-established platform and big size of network increases the chance of success of the project due to a ripple effect and blockbuster effects. Clear communication about the project's idea and goal is highly correlated with success. Regular communication on the project site, such as by constant progress updates, helps the success of the project. Equity-based crowdfunding is emerging as an innovative means of raising capital for businesses, so it has been receiving a lot of attention and expectation from the government and the market. The findings of this paper and others will help to get some understanding and insight into equity-based crowdfunding. However, Kickstarter differs from equity-based crowdfunding in the goals of the backers. Kickstarter's backers are not investors, they are contributors. To understand equity-based crowdfunding, the subject will need further study.

• Food Science and Preservation
• /
• v.21 no.2
• /
• pp.175-180
• /
• 2014

This study was conducted to investigate the physicochemical quality properties of oriental melon pickles harvested after pollination (green and fully ripe period) and soaking (cured and ripened). After the increase of the pollination size of melon, at 21 days, melon had a strong yellowish color, but at 24 days, its tip was completely yellow. In addition, 21 days after 5 days soaking, the weights of the harvested melons were reduced. Since then, there were no remarkable changes in weight. At 27 and 30 days, the b values of the melons that were harvested showed no trace of influence by the number of days of soaking and ripening. The melons harvested after 24 and 27 days, and the oriental melon pickles, maintained a constant hardness and texture after five days of soaking. This result indicates that melons harvested between 15 and 27 days after pollination can be used for melon pickles. To produce high-quality melon pickles with a yellowish color and a chewy texture, melons harvested 27 days after pollination and then soaked and ripened in salt water for 15 days should be used.

• 대한공업교육학회지
• /
• v.31 no.1
• /
• pp.200-210
• /
• 2006

This C-ring test, normally employed for evaluating susceptibility to stress-corrosion cracking, was determined to be a suitable small scale test to evaluate PWHT(Post-Weld Heat Treatment) cracking susceptibility. This test is possible to incorporate an actual weld, to introduce a notch into the coarse grained HAZ(Heat Affected Zone), to load the coarse grained HAZ any level of stress ad, most importantly, since the C-ring is an approximately constant strain type test, the stress decreases with time at temperature in a manner similar to that of an actual steel weldment. The procedure employed in making the C-ring was presented in the experimental procedure section, however, several points deserve further discussion. The walls of the weld groove are made along radial lines form the center of th var in order to obtain an HAZ which is oriented perpendicular to the walls of the machined C-ring. Therefore, the plane of maximum stress will be aligned through the HAZ and, therefore, crack propagation will not be forced to deviate form the plane of maximum stress in order to remain in the coarse grained HAZ as is the case with the Y groove test.

• Journal of the Korean Chemical Society
• /
• v.55 no.2
• /
• pp.208-217
• /
• 2011

The effects of pH and temperature on the removal of two dyes (neutral red; NR and malachite green oxalates; MG) from aqueous effluents using Maghnia montmorillonite clay in a batch adsorption process were investigated. The results showed the stability of the optical properties of MG in aqueous solution and adsorbed onto clay under wide range of pH 3-9. However, the interaction of NR dye with clay is accompanied by a red shift of the main absorption bands of monomer cations under pH range of 3-5, whereas, those of neutral form remains nearly constant over the pH range of 8-12. The optimal pH for favorable adsorption of the dyes, i.e. ${\geq}$90% has been achieved in aqueous solutions at 6 and 7 for NR and VM respectively. The most suitable adsorption temperatures were 298 and 318 K with maximum adsorption capacities of 465.13mg/g for NR and 459.89 mg/g for MG. The adsorption equilibrium results for both dyes follow Langmuir, Freundlich isotherms. The numerical values of the mean free energy $E_a$ of 4.472-5.559 kj/mol and 2.000-2.886 kj/mol for NR and MG respectively indicated physical adsorption. Various thermodynamic parameters, such as ${\Delta}H^{\circ}$, ${\Delta}S^{\circ}$, ${\Delta}G^{\circ}$ and Ea have been calculated. The data showed that the adsorption process is spontaneous and endothermic. The sticking probability model was further used to assess the potential feasibility of the clay mineral as an alternative adsorbent for organic ion pollutants in aqueous solution.

• Journal of the Korean Chemical Society
• /
• v.53 no.6
• /
• pp.693-703
• /
• 2009

The complex formation of anti-inflamatory drug piroxicam (PX, 4-hydroxy-2-methyl-N-2--pridyl-2H-1,2-benzothiazine-3-carboxadiamide-1,1-dioxide) with transition metal ions Co(II), Ni(II), Cu(II) and Zn(II) in methanol(MeOH)/water binary mixtures were studied by spectrophotometric method at 25$^{\circ}C$, constant pH = 5.0 and I = 0.1 M. The computer program SQUAD was used to extract the desired information from the spectral data. The outputs of the fitting processes were stability constants, standard deviations of the estimated stability constants, concentration distribution diagrams and spectral profiles of all species. The sequence of the stability constants of PX complexes with Co(II), Ni(II), Cu(II) and Zn(II) follow the Cu(II) > Co(II) > Ni(II) ${\approx}$ Zn(II) order. This may be due to different geometry tendencies of these metal ions. The acidity constants of the PX were also determined under above condition from its absorption spectra at different pH values. The computer program DATAN was used for determination of acidity constants of PX. The validity of the obtained acidity constants was checked by a well known computer program SPECFIT/32. The effects of the different parameters like solvent nature, cations characteristics on the stability and acidity constants were thoroughly discussed.

• Korean Journal of Agricultural Science
• /
• v.27 no.2
• /
• pp.81-85
• /
• 2000

In order to find a proper storage temperature and times for vegetable waxy corn, several waxy hybrids used in the study. Among waxy hybrids, stem height and ear length of Daehakchal and Eulrukchal hybrides were higher than Chalok#1 and #2 used as a check, but flowering daus were later about 7 days than check. Sugar content of Daehakchal was not almost changed at $-4^{\circ}C$ and below, whereas it was rapidly decreased at $4^{\circ}C$. Most hybrids with high sugar content were fast converted into starch than lower content hybrid. While moisture contents of waxy hybrids used were almost constant regardless of storage temperature in vegetable com packaged with poly ethylene vinyl. From these results, storage temperature of vegetable waxy corn was recommended at least $-4^{\circ}C$ below. Under the $-10^{\circ}C$ and below, storage period of vegetable waxy corn could prolong 60 days and above because sugar and moisture content of vegetable corn measure at $-10^{\circ}C$ and $-20^{\circ}C$ were almost no changed compared with those of fresh corn measured at harvest.

• Journal of the Korean Solar Energy Society
• /
• v.38 no.1
• /
• pp.25-36
• /
• 2018

The stoichiometric mixture of evaporating materials for the $CaAl_2Se_4$: Co single crystal thin film was prepared from horizontal furnace. Using extrapolation method of X-ray diffraction patterns for the polycrystal $CaAl_2Se_4$, it was found orthorhomic structure whose lattice constant $a_0$, $b_0$ and $c_0$ were 6.4818, $11.1310{\AA}$ and $11.2443{\AA}$, respectively. To obtain the $CaAl_2Se_4$: Co single crystal thin film, $CaAl_2Se_4$: Co mixed crystal was deposited on throughly etched Si (100) by the HWE (Hot Wall Epitaxy) system. The source and substrate temperature were $600^{\circ}C$ and $440^{\circ}C$ respectively. The crystalline structure of $CaAl_2Se_4$: Co single crystal thin film was investigated by the double crystal X-ray diffraction (DCXD). Hall effect on this sample was measured by the method of Van der Pauw and studied on carrier density and mobility depending on temperature. From Hall data, the mobility was likely to be decreased by impurity scattering in the temperature range 30 K to 100 K and by lattice scattering in the temperature range 100 K to 293 K. The temperature dependence of the energy band gap of the $CaAl_2Se_4$: Co obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)=3.8239eV-(4.9823{\times}10^{-3}eV/K)T_2/(T+559K)$. The open-circuit voltage, short current density, fill factor, and conversion efficiency of $p-Si/p-CaAl_2Se_4$: Co heterojunction solar cells under $80mW/cm^2$ illumination were found to be 0.42 V, $25.3mA/cm^2$, 0.75 and 9.96%, respectively.