• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.109-110
• /
• 2017

본 논문에서는 듀얼 액티브 브릿지에서 SPWM(Single Pulse Width Modulaton)과 DPWM(Dual Pulse Witdh Modulation)을 적용하였을 때, 인덕터 전류의 특성을 비교하고자 한다. 인덕터 전류의 특성을 이론적으로 분석하고, 실험을 통해서 결과를 분석하였다.

• Electronics and Telecommunications Trends
• /
• v.9 no.1
• /
• pp.97-108
• /
• 1994

본 고에서는 ITU-TS(구 CCITT)의 표준안을 중심으로 ISDN 사용자-망 인터페이스의 기본 구조와 각 기능군에서의 기능적 특성 및 기본 인터페이스 구조에 대한 S/T 기준점에 적용되는 사용자-망 인터페이스 계층 1의 전기적 특성에 대한 시험방법을 조사, 분석하였다.

• Journal of Environmental Science International
• /
• v.18 no.11
• /
• pp.1235-1245
• /
• 2009

The purpose of this study is to investigate electro-generation of free Cl, $ClO_2$, $H_2O_2$ and $O_3$ and degradation of Rhodamine B in solution using Ru-Sn-Sb electrode. Electrolysis was performed in one-compartment reactor using a dimensionally stable anode(DSA) of Ru-Sn-Sb/Ti as the working electrode. The effect of applied current (0.5-3 A), electrolyte type (NaCl, KCl, HCl, $Na_2SO_4$ and $H_2SO_4$) and concentration (0.5-2.5 g/L), air flow rate (0-3 L/min) and solution pH (3-11) was evaluated. Experimental results showed that concentration of 4 oxidants was increased with increase of applied current, however optimum current for RhB degradation was 2 A. The generated oxidant concentration and RhB degradation of the of Cl type-electrolyte was higher than that of the sulfate type. The oxidant concentration was increased with increase of NaCl concentration and optimum NaCl dosage for RhB degradation was 1.75 g/L. Optimum air flow rate for the oxidants generation and RhB degradation was 2 L/min. $ClO_2$ and $H_2O_2$ generation was decreased with the increase of pH, whereas free Cl and $O_3$ was not affected by pH. RhB degradation was increase with the pH decrease.

• Journal of Korea Foundry Society
• /
• v.38 no.2
• /
• pp.32-40
• /
• 2018

Changes in the microstructures and mechanical properties of an AC2B alloy through solution heat treatment were investigated using recycled AC2B cutting chips as raw material. The as-cast microstructure of the AC2B alloy comprised ${\alpha}$-Al, $Al_2Cu$, and coarse needle-shaped phases considered to be eutectic Si and an Al-Fe-Si based intermetallic compound. After solution heat treatments at $505^{\circ}C$ for 1 h and 6 h, the samples showed complete dissolution of $Al_2Cu$ and relatively fine distribution of intermetallic compounds. Hardness test results showed that the hardness rapidly increased after the solution heat treatment for 1 h by solid solution hardening, and the increase of hardness exhibited a plateau from 1 h to 6 h. The results of the hardness and tensile tests showed that there was no visible difference in the effect of 1 h and 6 h solid solution treatment.

• Journal of the Korean Vacuum Society
• /
• v.16 no.6
• /
• pp.463-467
• /
• 2007

Structure and optical properties of ZnO epilayers grown on oxygen- and hydrogen-plasma treated sapphire substrates by plasma-assisted molecular beam epitaxy (denoted as samples A and B, respectively) have been investigated by various techniques. The crystal quality and structural properties of the surface for the ZnO epilayers were investigated by high-resolution X-ray diffraction and atomic force microscope. For investigating the optical properties of excitonic transition of ZnO, we carried out photoluminescence experiments as a function of temperature. The free exciton, bound exciton emission and their phonon replicas were investigated as a function of temperature from 10 to 300 K, and the intensity of excitonic PL peak emission from the sample A is found to be higher than that of sample B. From the results, we found that sample A has better crystal structure quality and optical properties as compared to sample B. The number of oxygen vacancies may be decreased in sample A, resulting in an enhancement of the crystal quality and a higher intensity of excitonic emission band as compared to sample B.

• Microbiology and Biotechnology Letters
• /
• v.30 no.4
• /
• pp.352-358
• /
• 2002

An amylase that hydrolyzes starch into maltopentaose as a main product was found in the culture supernatant of a strain of Bacillus megaterium KSM B-404 isolated from local soil. The enzyme was purified 129-fold by ammonium sulfate precipitation, DEAE-Toyopearl and Superdex 75 HR 10/30 column using a FPLC system. The molecular weight of the amylase was determined as about 68 kDa by using SDS-PAGE. Optimum pH and temperature of amylase were found to be $50^{\circ}C$ and pH 6.0~7.0, respectively. The enzyme was stable up to $60^{\circ}C$ by addition of $Ca^{2+}$ and its pH stability was in the range of 6.0~10.0. The activity of enzyme was inhibited by $Cu^{2+}$ $Hg^{2+}$ , and $Fe^{3+}$ and maintained by $Ca^{2+}$ and $Mg^{2+}$ . EDTA and pCMB also showed inhibitory effect to the enzyme. TLC and HPLC analysis of the products of the enzyme reaction showed the presence of maltopentaose(52%), maltotriose (25%), maltose (11%), glucose, and maltotetraose in the starch hydrolysates.

• Journal of the Korean Magnetics Society
• /
• v.15 no.1
• /
• pp.42-47
• /
• 2005

Nanocrystalline Nd-Fe-B powder was synthesized by a new thermochemical process that combined with past reduction-diffusion process and spray-dry process. In this process, Ca reduction process is vary important due to formation of hard magnetic$Nd_{2}Fe_{14}B$ phase from various oxides by Ca powder. Therefore, the final products are essentially affected a shape, size, and composition etc. of the Ca reduced powders. Ca reduction was performed to way that raw powders just mixed with Ca powder in proper ratio unlike to compress into compact. The powders after mixture-type Ca reduction mainly composited with $Nd_{2}Fe_{14}B$ phase even relativily low reaction temperature ($800^{\circ}C$) and all particle size of powder were distributed less than 1 ${\mu}m$ except for powder after Ca oxides as magnetic properties of powders after cake-type Ca reduction, with the consequence that high magnetic properties has been expected. The magnetic properties of powders prepared by mixture-type Ca ruduction, with the conseqence that high magnatic properties has been expected. The magnetic properties of powders prepared by mixture-type Ca reduction process showed $_iH_c$ = 5.9 kOe, $B_r$ = 5.5 kG, (BH)max = $Nd_{2}Fe_{14}B{\to}Nd_{2}Fe_{17}B$ decomposition by violent exothermic reaction during washing.

• Proceedings of the KIPE Conference
• /
• 2011.11a
• /
• pp.301-302
• /
• 2011

본 논문에서는 리튬 폴리머 배터리($LiFePO_4/C$)의 개방전압(OCV;open-circuit voltage) 히스테리시스 특성을 이용한 확장 칼만 필터(EKF;extended Kalman filter) 기반 state-of-charge(SOC) 추정방법을 소개한다. 배터리 등가회로의 중요 요소인 OCV 모델링을 위해 충전 및 방전 각각의 OCV 히스테리시스 특성을 고려하였고 더불어 OCV-SOC 관계의 SOC 간격을 10%에서 5%로 조정하여 EKF 기반 SOC 추정알고리즘의 성능이 향상되었다. 축소된 하이브리드 자동차용 전류프로파일을 적용했을 때 SOC 추정이 잘 이루어지지 않는 영역은 EKF의 측정방정식에 노이즈 모델 및 데이터 리젝션(data rejection)을 구축하였다. 제안된 방법을 이용하여 SOC 추정결과 전류적산법 대비 5%이내의 SOC 추정에러를 만족하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.05b
• /
• pp.50-53
• /
• 2005

우리나라 송전선로의 위치는 국토의 65%에 이른 산지에 대부분 포설되어 있기 때문에 산볼과 같은 화재가 발생시 폴리머 애자에 대한 신뢰성에 중요한 문제점을 발생시킬 수 있다. 따라서 산불의 가장자리 온도인 $600^{\circ}C$ 부근에 노출된 폴리머 애자의 재질에 대한 특성 분석을 실시하였다. 그 결과 애자의 표면은 무기물이 노출되어 다공성의 특성을 보였고, 내아크시험 결과는 하부 갓의 아크소멸 시간은 A시료는 260초, 290초였고, B시료는 335초, 336초였다. 그리고 접촉각 측정결과는 첫 번째 갓의 하부부분이 상부에 비하여 $3^{\circ}$정도 높게 나타났다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.8
• /
• pp.958-968
• /
• 2003

The purpose of this study was to clarify the different mechanical properties of fabrics among the theme groups classified by fashion fabric trend. This study can be useful for fabric marketers and planners to design new products. In order to carry out this study, the fabric samples of representative theme for‘2002/03 F/W fashion fabric trend were collected from a fashion company and were measured to analyze the mechanical properties, hand value(H.V) and total hand value(T.H.V) by KES-FB System. The results were as follows. 1. The theme-A of‘Luxury, Elegance’was consisted of wool, rayon and PET and had a lower B, 2HB of bending properties and a lower G and 2HG5 of shear properties. The theme-B of‘Technical, Functional’was consisted of synthetic fibers such as PET, PA, PU and elastic fiber and had a higher MIU and a lower MMD, SMD of surface properties. The theme-C of‘Vintage, Aged’was consisted of mostly cotton and had the highest B and 2HB. The theme-D of‘Fancy, Airy’was consisted of mostly woolen wool, polyacryl and polyamide and had a high MMD and SMD of surface properties and a high LC and RC of compression properties. 2. As the results of analyzing H.V and T.H.V through KES-FB system, the theme-A showed a higher Smoothness and lower Stiffness. The theme-B had a lower Smoothness, Fullness, Soft feeling and T.H.V and the theme-C had the highest Stiffness. The theme-D showed the highest Fullness and Soft Feeling but the lowest Stiffness.