• 제목/요약/키워드: B mode

검색결과 2,433건 처리시간 0.031초

Density Functional Theory for Calculating the OH Stretching Frequency of Water Molecules

  • Jeon, Kiyoung;Yang, Mino
    • 대한화학회지
    • /
    • 제60권6호
    • /
    • pp.410-414
    • /
    • 2016
  • The anharmonic frequency of a local OH stretching mode of a water monomer and dimer was calculated using various levels of density functional theory. The quantum chemical potential energy curves as a function of the OH bond distance were calculated, and they were fitted with the Morse potential function to analytically obtain the fundamental transition frequency. By comparing those values with the frequencies similarly calculated using an ab initio quantum chemical method, the coupled cluster theory including both single and double excitations with the perturbative inclusion of triple excitation in the complete basis limit, the accuracy of various density functional methods in the calculation of anharmonic vibration frequency of water molecules was assessed. For a water monomer, X3LYP and B3LYP methods give the best accuracy, whereas for a water dimer, B972, LCBLYP, ${\omega}B97X$, ${\omega}B97$ methods show the best performance.

고온초전도체를 이용한 가지 형태 3 dB 방향성 결합기 설계 및 특성해석 (Design and Characterization of 3 dB Branch Type Directional Couplers using High-Tc Superconductors)

  • 정동철;최명호
    • 전기학회논문지
    • /
    • 제59권1호
    • /
    • pp.116-119
    • /
    • 2010
  • In this work, we presented the characterization of 3 dB branch type directional couplers by using High-Tc superconducting thin films. To do this, we deposited YBCO superconducting thin films on MgO substrates by using rf-magnetron sputtering techniques. The designed center frequency was 408 MHz and the designed passband was 20 MHz. Also we designed 3 dB Power difference and $90^{\circ}$ of phase difference between port 3 and port 4. The even and odd mode analysis were used to characterize our directional couplers and em Sonnet (full wave analysis program) was utilized to the optimum design. We reported experimental results, including a center frequency, passband, half power characteristics and phase differences. We confirmed that experimental results were in good agreements with characterization by using full wave analysis program.

이종적층 LTCC 기술을 이용한 WLAN용 대역통과 필터 설계 (Design of BPF for WLAN with Heterogeneous LTCC Materials)

  • 고정호;육종관;박한규;김준철;이영신
    • 한국전자파학회:학술대회논문집
    • /
    • 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
    • /
    • pp.188-192
    • /
    • 2003
  • A multilayer two-stage LC bandpass filter using low-temperature cofired-ceramic (LTCC) is proposed in this paper. The proposed bandpass filter is composed of two ceramic substrates with different dielectric constant instead of single ceramic material from top to bottom layer. The bandpass filter size is $2.0 mm{\times}1.2 mm{\times}0.8 mm$. Positioning of attenuation polefrequency, importance parameter for a performance of filter, is discussed using even-odd mode analysis by tuned capacitance of coupling capacitor and those results is implemented to LTCC filter circuit. Measured filter performances show that the insertion losses are -4.5dB, -4.1dB at 2.45GHz, 2.75GHz and the return losses are -8.5dB, 8.7dB.

  • PDF

Low Spurious Image Rejection Mixer for K-band Applications

  • Lee, Moon-Que;Ryu, Keun-Kwan;Kim, Hyeong-Seok
    • KIEE International Transactions on Electrophysics and Applications
    • /
    • 제4C권6호
    • /
    • pp.272-275
    • /
    • 2004
  • A balanced single side-band (SSB) mixer employing a sub-harmonic configuration is designed for up and down conversions in K-band. The designed mixer uses anti-parallel diode (APD) pairs to effectively eliminate even harmonics of the local oscillator (LO) spurious signal. To reduce the odd harmonics of LO at the RF port, we employ a balanced configuration for LO. The fabricated chip shows 12$\pm$2dB of conversion loss and image-rejection ratio of about 20dB for down conversion at RF frequencies of 24-27.5GHz. As an up-conversion mode, the designed chip shows 12dB of conversion loss and image-rejection ratio of 20 ~ 25 dB at RF frequencies of 25 to 27GHz. The odd harmonics of the LO are measured below -37dBc.

Phytolaccosides의 소염작용(消炎作用) (Antiinflammatory Action of Phytolaccosides)

  • 신국현;우원식;이정규
    • 생약학회지
    • /
    • 제10권2호
    • /
    • pp.73-77
    • /
    • 1979
  • Antiinflammatory action of phytolaccosides B and E isolated from the roots of Phytolacca americana was investigated and compared with that of aescin. Phytolaccoside B, when it was administered intravenously, exerted a potent inhibitory effect on the transudation caused by absorptive sponge pellet implanted s.c. in rats and on carrageenin induced edema in rats. Phytolaccoside E showed a weaker action than Phytolaccoside B did. Hemolytic potency of the saponins was decreased in the order of aescin, phytolaccosides B and E showing a same tendency as in antiinflammatory action. The experimental result suggests that the mode of action of phytolaccosides is the same as that of aescin.

  • PDF

평행 결합선로 이론에 근거한 MMIC 집중 소자형 방향성 결합기 (Lumped Element MMIC Direction Coupler Based on Parallel Coupled-Line Theory)

  • 강명수;박준석;이재학;김형석
    • 대한전기학회논문지:전기물성ㆍ응용부문C
    • /
    • 제53권11호
    • /
    • pp.577-582
    • /
    • 2004
  • In this paper, lumped equivalent circuits for a conventional parallel directional coupler are proposed. This equivalent circuits only have self inductance and self capacitance, so we can design exact lumped equivalent circuit. The equivalent circuit and design formula for the presented lumped element coupler is derived based on the even- and odd-mode properties of parallel-coupled line. By using the derived design formula, we have designed the 3dB and 4.7dB MMIC couplers at the center frequency of 3.4GHz and 5.6GHz respectively. Measurements for the designed MMIC directional couplers show at 4dB and 5.2dB-coupling value at the center frequency of 3.4GHz and 5.6GHz. Excellent agreements between simulation results and measurement results on the designed directional couplers show the validity of this paper

제어기 형태에 따른 HVDC 안정도 분석 (HVDC Stability Analysis According to Controller Types)

  • 김찬기;심응보;정길조;권동진;윤용범
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제49권10호
    • /
    • pp.665-674
    • /
    • 2000
  • This paper deals the HVDC system stability according to controller types. In this paper, in order to evaluate the stability, some important properties of the HVDC. such as $d{\tau}/d{\alpha}\;,\;dV/d{\alpha}$ and dP/dI stability in different control modes, are analysed. Furthermore, Maximum available power according to controller types are calculated. This paper shows a generated formulation of control sensitivity for control modes, aids in the design of the controller and the operating mode determination. Finally, a simulation is performed by Math/CAD, and a simulation results are verified.

  • PDF

YBCO Bulk 초전도체 교류손실의 주파수 의존성 (Frequency dependence of AC loss in YBCO Bulk superconductor)

  • 예정희;나완수;김찬중;홍계원
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 A
    • /
    • pp.259-261
    • /
    • 1999
  • In this paper, we investigated the frequency dependences of AC loss and the magnetic properties of a superconductor using magnetization method. We used the YBCO bulk superconductor sample which has a square-shaped cross sectional area of $6mm{\times}6mm$. and 43mm-long in axial direction. The applied AC magnetic field was parallel to the direction of sample axis. It is observed that YBCO bulk has the diamagnetic properties. AC loss calculation of YBCO bulk superconductor was performed by evaluating the total area of magnetization traces. We performed two cases of experiments, one for $B_m<B_p$ and the other for $B_m<B_p$. The experiments showed that the AC loss dependences on frequency were different in each mode, as was indicated in other publications.

  • PDF

Tailored Blank를 이용한 Side Panel 성형 (Stamping of Side Panel Using the Tailored Blank)

  • 권재욱;명노훈;백승엽;인정제;이경돈;유순영;이영국
    • 한국소성가공학회:학술대회논문집
    • /
    • 한국소성가공학회 1998년도 제2회 박판성형심포지엄 논문집 박판성형기술의 현재와 미래
    • /
    • pp.102-109
    • /
    • 1998
  • In this study, the side panels were developed using the laser-welded Tailored Blanks (TB) with both the same thickness and the different thickness. At first, the formability of the same thickness T.B was investigated to be compared with one of the non welded panel with respect to weldline movements and strain distribution on blank during the stamping. Based on these results, we selected candidates of T.B with different thickness for stamping experiments. That is, we determined the weld line positions and the die step. Then we made some stamping tryouts with selected types of blank designs to investigate the formability of T.B with different thickness. During the tryouts, the wrinkles were found in the a-pillar lower region which is under the deformation mode of the shrink flange. In the b-pillar region, the fractures were found also, these defects have been reduced and corrected by controlling the blank design and the die faces and process pamameters.

Polarization Insensitive CWDM Optical Demultiplexer Based on Polarization Splitter-rotator and Delayed Interferometric Optical Filter

  • Seok-Hwan Jeong;Heuk Park;Joon Ki Lee
    • Current Optics and Photonics
    • /
    • 제7권2호
    • /
    • pp.166-175
    • /
    • 2023
  • We theoretically analyze and experimentally demonstrate a polarization-diversified four-channel optical demultiplexer (DeMUX) comprising a hybrid mode conversion-type polarization splitter rotator (PSR) and delayed Mach-Zehnder interferometer optical DeMUX for use in coarse wavelength division multiplexing (CWDM)-based optical interconnect applications. The Si wire-based device fabricated by a complementary metal-oxide semiconductor-compatible process exhibited nearly the same filter spectral response irrespective of the input polarization state under the PSR. The device had an extremely low insertion loss of <1.0 dB, polarization-dependent loss of <1.0 dB, and interchannel imbalance of <0.5 dB, suppressing unwanted wavelength and polarization crosstalk from neighboring channels of <-20 dB at each peak transmission channel grid.