• Current Optics and Photonics
• /
• 제7권5호
• /
• pp.557-561
• /
• 2023

Ultralow-noise soliton pulse generation over a wider Fourier frequency range is highly desirable for many high-precision applications. Here, we realize a low-phase-noise soliton pulse generation by transferring the low phase noise of a mode-locked laser to a silica microcomb. A 21.956-GHz and a 9.9167-GHz Kerr soliton combs are synchronized to a 2-GHz and a 2.5-GHz mode-locked laser through a fractional optoelectronic phase-locked loop, respectively. The phase noise of the microcomb was suppressed by up to ~40 dB at 1-Hz Fourier frequency. This result provides a simple method for low-phase-noise soliton pulse generation, thereby facilitating extensive applications.

• 천문학논총
• /
• 제30권2호
• /
• pp.625-628
• /
• 2015

POLARBEAR is a ground-based experiment located in the Atacama desert of northern Chile. The experiment is designed to measure the Cosmic Microwave Background B-mode polarization at several arcminute resolution. The CMB B-mode polarization on degree angular scales is a unique signature of primordial gravitational waves from cosmic inflation and B-mode signal on sub-degree scales is induced by the gravitational lensing from large-scale structure. Science observations began in early 2012 with an array of 1.274 polarization sensitive antenna-couple Transition Edge Sensor (TES) bolometers at 150 GHz. We published the first CMB-only measurement of the B-mode polarization on sub-degree scales induced by gravitational lensing in December 2013 followed by the first measurement of the B-mode power spectrum on those scales in March 2014. In this proceedings, we review the physics of CMB B-modes and then describe the Polarbear experiment, observations, and recent results.

• 센서학회지
• /
• 제26권2호
• /
• pp.85-90
• /
• 2017

A wide dynamic range (WDR) CMOS image sensor (CIS) was developed with a specialized readout architecture for realizing high-sensitivity (HS) and low-sensitivity (LS) reading modes. The proposed pixel is basically a three-transistor (3T) active pixel sensor (APS) structure with an additional transistor. In the developed WDR CIS, only one mode between the HS mode for relatively weak light intensity and the LS mode for the strong light intensity is activated by an external controlling signal, and then the selected signal is read through each column-parallel readout circuit. The LS mode is implemented with the column capacitors and a feedback structure for adjusting column capacitor size. In particular, the feedback circuit makes it possible to change the column node capacitance automatically by using the incident light intensity. As a result, the proposed CIS achieved a wide dynamic range of 94 dB by synthesizing output signals from both modes. The prototype CIS is implemented with $0.18-{\mu}m$ 1-poly 6-metal (1P6M) standard CMOS technology, and the number of effective pixels is 176 (H) ${\times}$ 144 (V).

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.656-665
• /
• 1993

Two types of baby corn silk detachment systems called fixing and moving baby corn and based on applying frictional force on the silk were developed and evaluated. In the fixing mode the baby corn was fixed on a pin and a hollow frictional cylinder was moved concentrically and vertically along the baby corn towards the branch end. In the moving mode the baby corn was forced vertically towards the tip to pass through the same silk detachment cylinder. Traveling speeds of the detachment cylinder and the baby corn were 44.5 and 166.9 mm/s. In the fixing mode at silk moisture content of 91 % (w.b) silk detachment efficiencies at low and high speeds were 99.1 and 99.2%. The silk detachment efficiencies in the moving mode at low and high speeds were 96.6 and 98.5%. Damaged baby corn at low speed was less than at high speed in both modes. Minimum damage was nil in the fixing mode at low speed and the maximum was 47.5% in the moving mode at high speed. The damaged was due to ovaries r moval at the base near the joint between the baby corn and the branch.

• 대한기계학회논문집
• /
• 제19권2호
• /
• pp.391-401
• /
• 1995

Several tests of the Double Cantilever Beam(DCB) were carried out for influence of the fiber orientation on the Mode I of the interlaminar fracture behavior in the Carbon/Epoxy composites. The interlaminar fracture toughness of Mode I was estimated based on the energy release rate of Mode I, $G_{I}$. The fracture toughness at crack initiation, $G_{IC}$, increases from type A to type E. The fracture toughness, $G_{IR}$ , is almost constant macroscopically for type A and type E when crack propagates. $G_{IR}$ for types B, C, D increases rapidly at the beginning of the crack growth then it decreases gradually. The fracture surface observation by SEM was also obtained the same results. Consequently the influence of the fiber orientation on the Mode I Interlaminar fracture behavior was made clear.ear.

• 한국전자파학회논문지
• /
• 제15권6호
• /
• pp.540-547
• /
• 2004

본 논문에서는 900 MHz대역에서 70 % 이상의 고효율을 갖는 전류 모드 D급 전력증폭기를 설계, 제작하였다. 푸시-풀 B급 전력증폭기의 구조를 기초로 하여 병렬 고조파 컨트롤 회로를 적용하여, 기존 D급 전력증폭기의 큰 손실 요인이었던 소자 내 커패시턴스의 충, 방전에 의한 전력 손실을 최소화하였다. 측정결과, 900 MHz 대역, 출력전력 3.2 W에서 73 % 전력 부가 효율, 그리고 출력전력 5 W에서 72 % 전력 부가 효율을 각각 얻었으며 DC 전력에 따라 출력의 크기가 선형적으로 변화하는 D급 전력증폭기의 특성을 확인하였다.

• 전력전자학회논문지
• /
• 제4권3호
• /
• pp.223-230
• /
• 1999

일반적인 슬라이딩 모드 제어기 동조 방법은 동조 피라미터의 수가 플랜트의 차수에 비례하기 때문에 고차의 프로세스에서는 어렵고, 실용적이지 못하다. Camacho(1996)은 고차의 프로세스를 시간 지연 항이 포함된 1차 프로세스로 모델링한 고정 구조 슬라이딩 모드 제어기 설계 방법을 제안하였다. 그러나 Camacho가 제안한 방법은 시간 지연 항을 1차 Taylor 급수로 근사화하는 과정에서 발생되는 근사 오차에 의해 오버슈트, 정착시간, 명령추종 등에 문제점이 있다. 본 논문에서는 이를 개선하기 위해 가중치를 고려한 새로운 형태의 Taylor 근사 기법과 이를 토대로 새로운 슬라이딩 모드 제어기 설계 방법을 제안하고자 한다.

• 대한기계학회논문집B
• /
• 제36권4호
• /
• pp.371-376
• /
• 2012

본 연구에서는 대형버스 배기가스 테스트 모드인 JE-05 에서 DME와 디젤을 연료로 사용하는 대형 DME버스를 차대동력계, 배기가스 분석기 그리고 PM 측정시스템을 이용하여 대형 DME버스의 연비, 배기가 스특성 그리고 동적 특성에 대해 알아보았다. 대형 DME버스에는 6기통 8,071cc 디젤엔진이 장착되었으며, 현재 운행되고 있는 상용 디젤버스와는 달리 DOC, DPF와 같은 후처리 장치가 없다. 실험 결과, 각 부하에 따른 차량의 속도를 통하여 차량의 동적 특성은 DME와 디젤을 사용했을 때 거의 비슷한 것을 알 수 있었다. NOx, CO와 THC는 DME를 연료로 사용 시 디젤연료에 비해 더 적게 배출되는 것을 확인하였다. 하지만 PM은 DME연료를 사용 시 거의 발생하지 않았는데, 이는 DME가 함산소연료이고 분자구조상 탄소-탄소 결합이 없기 때문이라고 생각된다. $CO_2$는 각 연료 사용 시 비슷하게 발생하였으며, 저위발열량 베이스로 계산된 연비는 DME연료 사용 시 디젤연료보다 약 6.7% 더 낮게 나왔다.

• 한국인쇄학회지
• /
• 제27권1호
• /
• pp.29-47
• /
• 2009

Generally, if RGB image is sent to the printer when we print a digital photograph, the printer will convert RGB to CMYK by the inner built-in drive. Because the difference between color domain of RGB and CMYK will cause that change and difference. The most common way to solve the problem is to convert colors by using ICC profile at RIP software or to adapt automatic color converting from the software of the original printer. So we intended to study show which way is most efficient to the digital output and which color mode device is the best based on the printer's own drive in this paper. we tried to observe and check the extended range of color space such as AdobeRGB as well as CMYK and sRGB. Then we made sure which is the suitable color space. Besides, When we convert RGB mode into CMYK mode by utilizing RIP software and adapt the printer's ICC profile made by our selves, we evaluated the output we get and compared the result with extended RGB image. The results are as follows. In case of RGB mode, the printer requests RGB, and that makes the color space more efficient than CMYK's. Converted to CMYK by utilizing RIP software, the chroma is more linearized than the one produced with its' own driver. Compared with sRGB mode's color gamut, AdobeRGB mode's color gamut and CMYK mode's color, CMYK mode's color gamut is the smallest among 3 of them. CMYK mode's color gamut by utilizing RIP software can be changeable. that can be small and narrow or wide and broad. In other words, the volume of color gamut depends on how CMYK is linearized. The color space of sRGB is more advantageous than the one of AdobeRGB in color-reproduction printed. But in the group $-b^*$, the chroma leaves behind in terms of reproduction, In the group of $-a^*$, the chroma is excellent relatively. Visual evaluation of the image, AdobeRGB image has not many reproduction colors. Specially, according to printers' characteristics, Group B of AdobeRGB and sRGB color space is a long way behind In terms of reproduction but Group Y is excellent relatively.

• 한국인터넷방송통신학회논문지
• /
• 제11권4호
• /
• pp.157-164
• /
• 2011

$n=pq$인 합성수 $n$을 $p$와 $q$로 소인수분해하는 것은 매우 어려운 문제이다. 대부분의 소인수분해 알고리즘은 $a^2{\equiv}b^2$ (mode $n$)인 제곱 합동이 되는 ($a,b$)를 찾아 $a^2-b^2=(a-b)(a+b)$ 공식에 의거 유클리드의 최대공약수 공식을 적용하여 $p=GCD(a-b,n)$, $q=GCD(a+b,n)$으로 구한다. 여기서 ($a,b$)를 얼마나 빨리 찾는가에 알고리즘들의 차이가 있다. 제곱합동의 기초가 되는 페르마 알고리즘은 $a^2-b^2=n$을 찾는다. 본 논문은 $a^2-b^2=kn$, ($k=1,2,{\cdots}$)를 찾는 방법을 제안하였다. 제안된 방법에서 $b$는 5의 배수로 $b_1=0$ 또는 5가 반드시 한 개는 존재한다고 가정한다. 첫 번째로, $n_2n_1$에 대해 $b_1=0$와 $b_1=5$을 만족하는 $kn$을 구하여 $k$를 결정한다. 두 번째로, $a^2-b^2=kn$이 되는 $a_2a_1$을 결정한다. 세 번째로, $kn$ < $a^2$ < $(k+1)n$ 범위에 속하는 $\sqrt{kn}$ < $a$ < $\sqrt{(k+1)n}$의 범위를 결정하여 $a_2a_1$ 값들에 대해 $a^2-b^2=kn$으로 ($a,b$)를 구한다. 제안된 알고리즘을 몇 가지 사례에 적용한 결과 페르마 알고리즘에 비해 수행 속도를 현격히 단축시키는 효과를 얻었다.