• Journal of KIISE:Computing Practices and Letters
• /
• v.14 no.8
• /
• pp.793-797
• /
• 2008

To achieve flexible visual contents adaptation for multimedia communications, the ISO/IEC MPEG & ITU-T VCEG form the JVT to develop an SVC amendment for the H.264/AVC standard. JVT uses inter-layer prediction that can improve the rate-distortion efficiency of the enhancement layer. But inter-layer prediction causes computational complexity to be increased. In this paper, we propose a fast mode decision for inter frame coding. It makes use of the correlation between optimized prediction mode and its RD cost. Experimental results show that the proposed schemes save up to 38% of encoding time with a negligible coding loss and bit-rate increase.

• Journal of Power System Engineering
• /
• v.5 no.2
• /
• pp.13-21
• /
• 2001

Diesel emission control is being addressed worldwide to help preserve the global environment. This paper mainly deals with the effects of oxidation catalysts to reduce emissions from the automotive heavy-duty diesel engine. Two types of the oxidation catalyst with different kinds of precious material were used. An 11 litter displacement diesel engine with turbocharger was operated to evaluate DOC with various engine speed, load conditions under D-13 mode cycle. We could propose the detail emission data of an automotive heavy-duty diesel engine and the characteristics of the conversion efficiency of the DOC under the D-13 mode. It was found that the mean conversion efficiencies of CO and THC were 49.7% and 61% under the D-13 mode test, respectively.

• Smart Structures and Systems
• /
• v.20 no.5
• /
• pp.525-537
• /
• 2017

This paper explores different vibration control strategies for the cancellation of human-induced vibration on a structure with time-varying modal parameters. The main motivation of this study is a lively urban stress-ribbon footbridge (Pedro $G\acute{o}mez$ Bosque, Valladolid, Spain) that, after a whole-year monitoring, several natural frequencies within the band of interest (normal paring frequency range) have been tracked. The most perceptible vibration mode of the structure at approximately 1.8 Hz changes up to 20%. In order to find a solution for this real case, this paper takes the annual modal parameter estimates (approx. 14000 estimations) of this mode and designs three control strategies: a) a tuned mass damper (TMD) tuned to the most-repeated modal properties of the aforementioned mode, b) two semi-active TMD strategies, one with an on-off control law for the TMD damping, and other with frequency and damping tuned by updating the damper force. All strategies have been carefully compared considering two structure models: a) only the aforementioned mode and b) all the other tracked modes. The results have been compared considering human-induced vibrations and have helped the authors on making a decision of the most advisable strategy to be practically implemented.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.48 no.9
• /
• pp.467-475
• /
• 1999

This paper presents an analysis method of a forward converter, using both the finite element method considering the external circuit and a state variables equation. The converter operates at 50kHz and its one period is divided into two modes for the simplicity of the analysis. In the first mode, the switching transistor turns on and an input power is transferred into the load by the electromagnetic conversion action of a ferrite transformer. In the second mode, the switching transistor turns off and the stored energy in an inductor is delivered to the load, and the transformer core is demagnetized by the reset winding current. In this paper, time-stepping finite element method taking into account the on-state electrical circuit of the converter in used to analyze both the electrical circuit and electromagnetic field of the magnetic device during the first mode and the demagnetization period of the transformer core. Then a state variables equation for the circuit which the inductor current flows is constituted and solved during the second mode. As a result, the simulation results have been good agreement with the results obtained form experiment.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.12
• /
• pp.601-608
• /
• 2005

This paper presents a novel single-stage high-power-factor electronic ballast for fluorescent lamps operating in critical conduction mode. The proposed topology is based on integration of boost converter as power factor corrector(PFC) and a half-bridge high frequency parallel resonant inverter into a single stage. The input stage of the boost converter is operating in critical conduction mode for positive and negative half cycle voltage respectively at line frequency(60Hz). So that a boost converter makes the line current follow naturally the sinusoidal line voltage waveform. The simulated and experimental results for 100W fluorescent lamps operating at 42kHz switching frequency and 220V line voltage have been obtained. This proposed inverter will be able to be practically used as a power supply in various fields as induction heating applications, fluorescent lamp and DC-DC converter etc.

• Journal of Broadcast Engineering
• /
• v.10 no.3
• /
• pp.348-356
• /
• 2005

In this paper, we propose a fast bitrate reduction transcoding method to convert a bitstream coded by H.264 into a lower bitrate H.264 bitstream. Block mode informations and motion vectors generated by H.264 decoder are used for probability-based block mode determination in the proposed transcoding method. And the motion vector reuse and motion vector refinement process are applied in the proposed transcoding. In the experiment results, the proposed methods achieves approximately 40 times improvement in computation complexity compared with the cascaded pixel domain transcoding, while the PSNR(Peak Signal to Noise Ratio) is degraded with only $0.1\~0.3$ dB.

• Journal of the Optical Society of Korea
• /
• v.9 no.4
• /
• pp.135-139
• /
• 2005

We demonstrate a simple and effective wavelength-tunable add/drop filter suitable for coarse wavelength division multiplexing (CWDM) systems. The filter consists of two fibers in contact side by side, with identical long-period fiber gratings (LPG) in each fiber. The LPG couples the power in the fundamental core mode to one of the cladding modes, which is then coupled to the same order cladding mode in the other fiber through evanescent-field coupling between two fibers. Finally, the cladding mode in the second fiber is coupled to its core mode with the help of the other LPG. With an optimal longitudinal offset distance of 10 em, coupling efficiency as high as -1.68 dB and side lobes smaller than -24 dB were experimentally obtained. The experimental results agreed well with the theoretical ones. The operating wavelength of the proposed add/drop filter was tunable by varying the temperature. The temperature sensitivity was measured to be -0.43 nm/$^{\circ}C$.

• The Journal of Society for e-Business Studies
• /
• v.23 no.3
• /
• pp.1-12
• /
• 2018

Mixed-criticality systems consist of components with different criticality. Recently, components are categorized depending on criticality by ISO 26262 standard and DO-178B standard in automotive and avionic domain. Existing mixed-criticality system research achieved efficient and safe scheduling through system-level criticality mode. The drawback of these approaches is performance degradation of low-criticality tasks on high-criticality mode. Task-level criticality mode is one method to address the problem and improve the performance of low-critical tasks. In this paper, we propose probabilistic performance metric for the approach. In simulation results with probabilistic performance metric, we showed that our approach has better performance than the existing approaches.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.640-642
• /
• 2021

In order to collect a lot of data clearly and efficiently, it is essential to know the locations of the current facilities and analyze the movement data. The current location collection technology can collect data using a GPS (Global Positioning System) sensor, but in the case of GPS, it has strong straightness and low diffraction and reflectivity, making it difficult to position indoors. It is impossible to measure the distance between the server and the client because the signal sensitivity cannot be received. This paper implements an indoor positioning system using beacons and scanners in Raspberry Pi 3 B+. It controls Advertise Mode and Connection Mode at the same time using the scanner algorithm.

• Korean Journal of Microbiology
• /
• v.28 no.4
• /
• pp.351-363
• /
• 1990

A mutant was selected by NTG treatment of Mycobacterium sp. NRRL B-3805, which was capable of degrading plant sterol to androsta-4-ene-3, 17-dione and yields was higher than NRRL B-3805. Also this mutant produced androst-4-ene-3, 17-dione faster than NRRL B-3805. It described the mode of sitosteroidal degradation, and the interrelation between cell membrane and its attachment to substrate during the sterol degradation process by this mutant and it was compared with Mvcobacterium sp. NRRL B-3805.