• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.1120-1123
• /
• 1995

In this paper, an automatic B/STUD inspection system has been developed using the computer aided vision system. Index Table has been used to get the rapid measurement and multi-camera has been used to get the high resolution in mechanical system. Camera calibration was suggested to perform the reliable Inspection. Image processing and data analysis algorithms for B/STUD inspection system has been investigated and were performed quickly with high accuracy. As a result, Inspection system of a B/STUD can be measured with a high resolution in real time.

• 한국구조물진단유지관리공학회 논문집
• /
• 제5권4호
• /
• pp.131-138
• /
• 2001

In inverted T-shape composite beam examine the structural behavior by experiment According to arrangement, type of stud connector, type of shear connector, reinforcement by welding of stirrup and a close analysis we came to these conclusion. 1) The compare result of bending strength according to arrange type of stud connector : A1-W(stud connector located web)specimen is exceed than A1-F(stud connector located flange). 2) B1-N(using prominence and depression of the web by shear connector) specimen is decrease than A1-W(using stud bolt by shear connector)specimen in bending strength and B2-N(reinforced by welding the stirrup to lower flange)specimen is similar with A2-W specimen. 3) According to reinforced by welding the stirrup to flange, the stiffness and bending strength of the beams are increase. A-scries stirrup comparatively low effective in the increase of strength by welding the stirrup to flange because enough composite effect show by stud connector, but B-series stirrup is comparatively high effective in shear connector effect because shortage of prominence and depression of the web.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.719-724
• /
• 2013

In the case of newly developed stud which has more performance of sound transmission loss, it is expected that sound would transmit through runner than stud. so we developed construction method of runner and stud. As a result, sound transmission loss is improved about 2 dB by using this method. But this construction method could be applied to only newly developed stud. In addition, sound leak of wall joint is about 2 dB, and it could be improved by using rubber gasket at joint.

• 대한치과의사협회지
• /
• 제32권9호통권304호
• /
• pp.620-628
• /
• 1994

Stud attachment는 overdenture와 overlay partial denture에 이용되며 임상술식 및 기공과정이 간편하며 가격이 저렴하여 많이 이용되고 있다. 여기에서는 Stud attachment(대한치과의사협회지 1993년 7-8월호)에 이어서 최근에 개발됐거나 우리가 임상에 응용하기에 적합하다고 생각되는 Micro-Fix, Dalbo-B, Dalbo-Rotex attachment에 관하여 설명하고자 한다.

• 대한치과의사협회지
• /
• 제32권8호통권303호
• /
• pp.550-556
• /
• 1994

Stud attachment는 overdenture와 overlay partial denture에 이용되며 임상술식 및 기공과정이 간편하며 가격이 저렴하여 많이 이용되고 있다. 여기에서는 Stud attachment(대한치과의사협회지 1993년 7월호)에 이어서 최근에 개발됐거나 우리가 임상에 응용하기에 적합하다고 생각되는 Micro-Fix, Dalbo-B, Dalbo-Rotex attachment에 관하여 설명하고자 한다.

• 소성∙가공
• /
• 제15권8호
• /
• pp.562-567
• /
• 2006

Micro-alloyed steel or heat-treatment-free used in clean technology have been replacing for conventional quenched-and-tempered structural steels since the micro-alloyed forging steel was developed in early 1970s in Germany for saving money of heat treatment, simplified process, short delivery and good productivity. In this paper, ball stud assembled in steering system for automobile was selected to compare conventional process making heat treatment with new process using high strength micro-alloyed steel without heat treatment. The conventional process for ball stud was composed of a total of 6 steps including upsetting, forward extrusion, machining, burnishing and tread rolling with heat treatment and shot blasting. As opposed to conventional process, newly proposed process for ball stud using the clean technology without heat treatment is simplified such as forward extrusion, heading, upsetting, forming having a flange shape and tread rolling. Also net shape forming process to achieve specified process not to include machined step fur manufacturing the ball stud was applied to newly simplified process since micro-alloyed steel is difficult to be formed.

• 대한치과보철학회:학술대회논문집
• /
• 대한치과보철학회 2000년도 춘계학술대회
• /
• pp.42-42
• /
• 2000

• 한국소음진동공학회논문집
• /
• 제27권1호
• /
• pp.94-99
• /
• 2017

Breaking the rigid connection between the two faces of the wall can significantly improve the sound transmission loss of the wall. This is usually achieved by resiliently mounting the gypsum board on one of the two faces of the wall using resilient channel. Resilient channel with less stiffness than that of air cavity could move the resonance frequency of the light-weight wall. So we can get higher sound transmission loss at low frequencies for light-weight wall using resilient channel. It's sound transmission loss is 17 dB higher than that of single stud wall, and 5 dB higher than that of double stud wall.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 추계학술대회 논문집
• /
• pp.473-474
• /
• 2012

• Journal of the Korean Wood Science and Technology
• /
• 제36권4호
• /
• pp.26-36
• /
• 2008

건축구조 설계기준이 개정됨에 따라서 목조건축물의 제한 기준이 완화되어 경골 목조건축의 다층 시공이 가능하게 되었다. 건축물의 규모 증가는 건물에 작용하는 하중을 증가시키므로 증가된 작용하중에 맞추어 하중저항성능을 향상시켜 설계하고 시공해야 한다. 기존에는 경골 목조건축의 전단성능을 향상시키기 위하여 벽량을 보강하는 방법을 적용하였으나 본 연구에서는 홀드다운 접합철물을 사용하는 방법을 적용하였다. 홀드다운은 아직까지 국내에서 보편적이지 않은 접합철물이므로 홀드다운의 국내 적용 적합성을 평가하기 위하여 본 연구를 수행하였다. 홀드다운을 적용한 경골 목조 전단벽에 대하여 정적하중 시험을 통한 전단성능 평가 결과 홀드다운 적용 후에 전단벽의 초기강성, 항복하중 및 기준하중이 향상됨을 확인하였으며, 전단성능 향상에 따라 수평 변위와 전단변형의 증가율이 감소하는 것이 확인되었다. 홀드다운과 스터드의 접합방법에 따른 전단성능의 차이는 크지 않은 것으로 확인하였고, 홀드다운 제품 설계강도가 증가할수록 전단벽의 전단성능도 증가하는 경향이 나타났으나 그 차이가 제품 설계강도 차이에 비하여 크지 않은 것으로 판단되었다. 홀드다운을 설치하는 스터드의 규격에 따라서 89 mm 스터드를 사용한 경우와 38 mm 스터드를 두 겹으로 사용한 경우에 비슷한 성능을 나타내므로 38 mm 부재에 홀드다운을 설치할 경우는 스터드의 두께 보강을 통한 성능 향상이 필요하다고 판단하였다.