• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.9
• /
• pp.4177-4185
• /
• 2012

LEDs are becoming the most suitable candidate replacing traditional fluorescent lamps because of its eco-friendly characteristics. LEDs are also actively used to design green building system and to make outdoor billboard as a back-light system due to its high energy efficiency. In this paper, we have developed AC direct driver for $12{\times}12$ FLB(flexible LED board) and LED flat light without SMPS. It has LID-PC-R101B driver IC that can support the high power factor and be composed of LED switching circuit in group. Also, an elaborate system designs can guarantee a high luminous efficiency, a high reliability and a low power consumption. The proposed FLB has the ultra slim shape of $450{\times}450$ mm, width of 4 mm and weight of 280 g. In the end, we have developed a prototype of FLB for billboard and flat light for room lighting with AC direct driver iposrder to verify the performance of the proposed system.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.11
• /
• pp.127-136
• /
• 2007

An abrupt scene-change frame is one that is hardly correlated with the previous frames. In that case, because an intra-coded frame has less distortion than an inter-coded one, almost all macroblocks are encoded in intra mode. This breaks up the rate control flow and increases the number of bits used. Since the reference software for H.264 takes no special action for a scene-change frame, several studies have been conducted to solve the problem using the quadratic R-D model. However, since this model is more suitable for inter frames, the existing schemes are unsuitable for computing the QP of the scene-change intra frame. In this paper, an improved rate control scheme accounting for the characteristics of intra coding is proposed for scene-change frames. The proposed scheme was validated using 16 test sequences. The results showed that the proposed scheme performed better than the existing H.264 rate control schemes. The PSNR was improved by an average of 0.4-0.6 dB and a maximum of 1.1-1.6 dB. The PSNR fluctuation was also in proved by an average of 18.6 %.

• The Plant Pathology Journal
• /
• v.28 no.2
• /
• pp.207-211
• /
• 2012

It has been known that streptomycin resistance in bacteria can occur as a results of chromosomal mutation or through gene acquisition or both. Chromosomal mutations for resistances are point mutations in the rpsL gene, which alter ribosomal protein S12. Acquired resistance has occurred when an $Sm^R$ plasmid carrying transposon Tn5393 with tandem strA-strB gene is transferred by conjugation. A total of 686 isolates of Xanthomonas smithii subsp. citri causal agent of citrus canker disease were collected from 26 citrus orchards in Jeju Island in 2003 and 2004 seasons. Forty-nine of 111 isolates from streptomycin non-sprayed orchards in 2003 season were resistant to streptomycin. Of 107 isolates from orchards sprayed one time with streptomycin, 58 isolates were resistant, and 166 of 221 isolates from orchards sprayed two times with streptomycin were resistant. In 12 orchards sprayed three or more times with streptomycin, 219 of 247 isolates were resistant to streptomycin. Twenty-five isolates of X. smithii subsp. citri were surveyed to identify the mechanisms of streptomycin resistance in this study. Twenty-one of these 25 isolates were resistant to streptomycin, and it was proven by PCR assay that 18 of the 21 streptomycin resistant isolates have the strB gene. In sixteen of the 21 streptomycin resistant isolates, it was occurred a point mutation altered codon lysine (AAG)-41 of rpsL gene to arginine (AGG). The streptomycin-sensitive isolates easily acquired the resistance by mixed culture with resistant isolates. The strB gene was amplified from the isolates that acquired the resistance by mixed culture, and one isolate of them was also point-mutated in codon 41 of rpsL gene to be resistant. In this study, most of the streptomycin-resistant isolates of X. smithii sub sp. citri in Jeju island expressed the resistance by both chromosomal point mutation and gene acquisition, and the resistance was easily acquired through conjugation by culture mixed with streptomycin resistant and sensitive strains.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.3
• /
• pp.184-196
• /
• 2020

In this paper, a single-bit 2nd-order delta-sigma modulator with the architecture of cascaded-of-integrator feedforward (CIFF) is proposed for precision measurement of current flowing through a secondary cell battery in a battery management system (BMS). The proposed modulator implements two switched capacitor integrators and a single-bit comparator with peripheral circuits such as a non-overlapping clock generator and a bias circuit. The proposed structure is designed to be applied to low-side current sensing method with low common mode input voltage. Using the low-side current measurement method has the advantage of reducing the burden on the circuit design. In addition, the ±30mV input voltage is resolved by the ADC with 15-bit resolution, eliminating the need for an additional programmable gain amplifier (PGA). The proposed a single-bit 2nd-order delta-sigma modulator has been implemented in a 350-nm CMOS process. It achieves 95.46-dB signal-to-noise-and-distortion ratio (SNDR), 96.01-dB spurious-free dynamic range (SFDR), and 15.56-bit effective-number-of-bits (ENOB) with an oversampling ratio (OSR) of 400 for 5-kHz bandwidth. The area and power consumption of the delta-sigma modulator are 670×490 ㎛2 and 414 ㎼, respectively.

• Clinical and Experimental Pediatrics
• /
• v.50 no.11
• /
• pp.1091-1096
• /
• 2007

Purpose : The of common carotid artery intima media thickness (IMT) is an acknowledged noninvasive marker for early atherosclerotic changes. We investigate whether common carotid IMT is different between obese and normal-weight children and also evaluate the relationships IMT with cardiovascular risk factors. Methods : We collected the clinical data (age, sex, pubertal stage, body mass index) and measured blood pressure, glucose, insulin, lipid profiles and adiponectin in 49 obese children (mean age, 12 years) and 24 nonobese children as controls. The control group was composed of 24 nonobese children of the same age, sex and pubertal stage. We measured the carotid IMT of all subjects by B-mode ultrasound with a 7.5-MHz linear transducer and analyzed. Results : Obese children demonstrated a significantly thicker intima media (mean, 0.34 mm, peak, 0.42 mm) compared to the control group (mean, 0.31 mm, peak, 0.38 mm, P<0.01). IMT was significantly correlated to the BMI (r=0.431, P<0.01), age (r=0.317, P<0.01), total cholesterol (r=0.377, P< 0.01), triglyceride (r=0.253, P<0.05) and low-density lipoprotein cholesterol (r=0.289, P<0.05). Serum adiponectin was significantly lower in obese children than in controls (11.2 ng/mL vs. 14.7 ng/mL, P<0.05) and negatively related with IMT (r=-0.267, P<0.05). Conclusion : Obesity is associated with increased carotid artery IMT in children. Our results suggest vascular changes in obesity seem to occur already in childhood and vascular ultrasonography may helpful for screening cardiovascular complications in obese children.

• Journal of Food Hygiene and Safety
• /
• v.28 no.3
• /
• pp.247-251
• /
• 2013

The objective of present study was to develop a simultaneous determination method of 5 medical compounds, including beclomethasone, dexamethasone, prednisolone, ketoprofen, phenylbutazone in foods, using LC-MS/MS. To optimize MS analytical condition of 5 compounds, each parameter was established by MRM mode. The chromatographic separation was achieved on a C18 column successfully, with a mobile phase made up of A (0.1% formic acid) and B (0.1% formic acid in acetonitrile), at a flow rate of 0.3 mL/min for 17 min with a gradient elution. LOD and LOQ of 5 compounds were in the range of 0.40~4.60 ng/mL and 0.81~11.46 ng/mL, respectively. As a result of analyzing the three concentrations of the standard mixture added to blank samples, the results showed that the mean recovery rate of 5 compounds was in the range of 81.52~103.83%, and RSD (%) of Intra- and Inter-day assay were 0.52-10.45. Since relatively fine selectivity, accuracy and reproducibility were shown in this qualified experimental method, it could be utilized efficiently to investigating those 5 compounds to see if it is added to food products illegally.

• Journal of Applied Biological Chemistry
• /
• v.53 no.1
• /
• pp.25-30
• /
• 2010

This paper describes a simultaneous method for the determination of two aminoglycosides (neomycin and gentamicin) using solid phase extraction followed by liquid chromatograph-mass spectrometry. The extract was applied to an WCX and HLB solid phase extraction cartridge. The cartridges were washed with water and methanol, and analytes were eluted with TCA buffer-acetonitrile mixture. The aminoglycosides were separated by ion-pairing reversed phase mode prior to ESI-LC/MS. Under the conditions applied neomycin was almost separated from all the gentamicin compounds. No interfering peaks from endogenous compounds of matrix were noted at the elution position of the analytes. Recoveries of neomycin fortified at levels of 0.25, 0.5, 1.0 and 2.0 mg/kg seafood samples ranged from 92 to 115%. Recoveries of gentamycin fortified at levels of 0.05, 0.1, 0.2, 0.4 mg/kg seafood samples ranged from 99 to 116%. Method detection limits in four seafood sample matrices were between 0.002 and 0.033 mg/kg.

• Journal of Food Hygiene and Safety
• /
• v.28 no.1
• /
• pp.75-82
• /
• 2013

The simultaneous analysis and monitoring of aflatoxin $B_1$, $G_1$, $B_2$, $G_2$ and ochratoxin A in foods were carried out by HPLC with fluorescence detection. The samples were extracted with methanol/water mixture. The extract was centrifuged, diluted with phosphate buffer saline (PBS), filtered, and applied to an immunoaffinity column containing antibodies specific to both aflatoxins and ochratoxin A. After washing the column with PBS and water, the toxins were eluted from the column with methanol, and quantified by HPLC, with a run time of approximately 30 min. The recoveries for aflatoxin $B_1$, $G_1$, $B_2$, $G_2$ and ochratoxin A in foods were 78.4~101.5%, 73.3~102.1%, 81.7~106.7%, 67.0~104.6% and 78.7~120.8%, respectively. The limits of detection of aflatoxins and ochratoxin A ranged from 0.05 to $0.18{\mu}g/kg$. According to monitoring result with the established method, aflatoxin $B_1$ and ochratoxin A were found in 13 of 151 domestic commercial foods. The contamination levels were $0.32{\sim}1.80{\mu}g/kg$ for aflatoxin $B_1$ and $0.97{\mu}g/kg$ for ochratoxin A. Therefore, this study showed all commercial foods monitored were safe under the Korean standards for aflatoxins and ochratoxin A.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.23 no.1
• /
• pp.68-81
• /
• 2021

The agricultural ecosystem is one of the major sources of greenhouse gas (GHG) emissions. In order to search for climate change adaptation options which mitigate GHG emissions while maintaining crop yield, it is advantageous to integrate multiple models at a high spatial resolution. The objective of this study was to develop a tool to support integrated assessment of climate change impact b y coupling the DSSAT model and the DNDC model. DNDC Regional Input File Tool(DRIFT) was developed to prepare input data for the regional mode of DNDC model using input data and output data of the DSSAT model. In a case study, GHG emissions under the climate change conditions were simulated using the input data prepared b y the DRIFT. The time to prepare the input data was increased b y increasing the number of grid points. Most of the process took a relatively short time, while it took most of the time to convert the daily flood depth data of the DSSAT model to the flood period of the DNDC model. Still, processing a large amount of data would require a long time, which could be reduced by parallelizing some calculation processes. Expanding the DRIFT to other models would help reduce the time required to prepare input data for the models.

• Journal of dental hygiene science
• /
• v.12 no.4
• /
• pp.348-358
• /
• 2012

This study aims to prepare the basic data of the teeth color by measuring analyze mode using the color of the maxillary anterior teeth (maxillary central incisor, lateral incisor, canine) of the college students in their twenties as the dental colorimeter. The maxillary anterior teeth of the subjects of study as 467 students (male 89, female 378) were measured from 14 November to 2 December, 2011, so the color of total 1,401 teeth was examined, and oral health and eating habit attributes were researched. The survey results were as follows. 1. The color of maxillary anterior teeth was changed from maxillary central incisor to maxillary canine, brightness ($L^*$) was decreased $76.79{\pm}4.86$ to $69.72{\pm}4.62$, red chroma ($a^*$) was increased $2.02{\pm}2.00$ to $4.10{\pm}2.60$, yellow chroma ($b^*$) was increased $15.51{\pm}3.42$ to $20.10{\pm}3.46$. 2. Brightness ($L^*$) was different according to sex (p< 0.001), major (p<0.001), grade (p<0.001), smoking (p<0.001), oral health education (p<0.01), daily brushing frequency (p<0.001), brushing method (p<0.05), oral hygiene devices (p<0.001), and red chroma ($a^*$) to major (p<0.001), daily brushing frequency (p<0.05), brushing time after meals (p<0.01), oral hygiene devices (p<0.01), and yellow chroma ($b^*$) to brushing time after meals (p<0.01), subjective tooth color (p<0.001). 3. Brightness ($L^*$) of eating habit attributes was different according to coke, candy ($R^2=0.053$, p<0.05). In conclusion, this study demonstrates that the color of maxillary anterior teeth has differences in brightness ($L^*$), red chroma ($a^*$), yellow chroma ($b^*$) from each tooth, also these showed various tendency according to the oral health and eating habit attributes.