• Journal of The Korean Society of Agricultural Engineers
• /
• v.53 no.2
• /
• pp.53-60
• /
• 2011

This study was conducted to investigate the effect of hydropower factors (watershed, gross head), operation ratio and unit electricity cost on the benefit-cost ratio (B/C ratio) of small hydropower using agricultural reservoirs. The equation of B/C ratio was expressed as a function of watershed area, gross head, operation ratio and unit electricity cost. The benefit increased with watershed area, gross head and unit electricity cost, while the cost increased with watershed area and gross head but decreased with operation ratio. The B/C ratio increased with watershed area, gross head, operation ratio and unit electricity cost. While the effect of gross head on the B/C ratio decreased with watershed area, the effect of operation ratio and unit electricity cost on the B/C ratio increased with watershed area. The operation ratio is an important factor to affect the B/C ratio and therefore we need to develop hydropower for the heightened dams to expect high operation ratio due to continuous water release. The unit electricity cost is also an important factor to affect the B/C ratio and the B/C ratio was always below 1 unless unit electricity cost is over 60 Won/kWh under given conditions. The reservoirs with economic feasibility for small hydropower development were three in 21 when the equation of B/C ratio was appled to the study reservoirs. The results can be used to choose the appropriate reservoir with economic feasibility for development of small hydropower.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.34 no.1
• /
• pp.78-86
• /
• 1992

This paper aims at investigating the effect of steel ratio and the magnitude of edge-ratio on the mechanical characteristics of reinforced concrete ring sector plate. The influence of steel bars was taken into account by coupling stiffness matrix of the steel bar element with that of the concrete plate element without dealing with separate element of steel bar and by establishing the composite stiffness matrix, which leads to the desirable result which does not increase th number of element could be obtained. Through case studies with 6 cases various steel ratios in ring sector plate supported at four edges and 4 cases with different open angles, the influence of the steel ratio was examined. A numerical analysis to find out the effect of the steel ratio d ue to above mentioned cases was carried out by 4 boundary conditions ; all edges clamped (B.C-1), all edges simply supported (B.C-2), curvilinear two edges clamped and other edges free (B.C-3) and curvilinear two edges simply supported and other edges free(B.C-4). The main results obtained are summarized as follows : 1. The effect of steel ratio on the magnitude of lateral deflection and x-directional bending moment at the center of sector plate and the midpoint of outer and inner curvilinear edges is almost the same up to $30^{\circ}$ of open angle. Beyond $30^{\circ}$ of the angle, the larger the angle, the greater the effect of ratio. 2. In design works using balanced steel ratio, the effect of steel bar can be ignored. But for larger open angles, especially greater than $90^{\circ}$, it proves desirable to consider the effect of steel bar. 3. The effect of the arc length of center circle/straight edge on lateral deflection and bending moment is remarkable in B.C-2. For larger open angle, the effect is also noted except for B.C-3 which turn out hardly affected. 4. The effect of the radius of curvature/straight side length on lateral deflection and x-directional bending moment is noted in B.C-2. As open angle increases, B.C-1 and B.C-3 almost agree and B.C-2 approaches B.C-4.

• Journal of Korean Society of Forest Science
• /
• v.101 no.1
• /
• pp.46-52
• /
• 2012

The purpose of this study is to give ROI informations about management status and investment returns to someone who will newly cultivate lycium chinese miller or expand area of its cultivation. In this study, IRR, B/C Ratio and NPV is used for ROI analysis. We basically surveyed fifty two among Lycium Chinese Miller cultivation farmhouses in chief producing districts Chungnam Chungyang, Jeonnam Jindo in Korea from May until September in 2009. Hence, this study surveyed these farmers about production cost, management cost, input labors and materials, land price and etc. by working process to calculate production and operation cost. As the result of farm survey, average selling price of Lycium Chinese Miller is 15,000 won per kg at locals for five years. However, when 3% discount rate is applied, the result of the analysis is B/C Ratios 0.89, which shows unprofitable. Therefore, it is a possible baseline that price of Lycium Chinese Miller is at least 16,800 won per kg with 3.00% IRR and B/C Ratio is 1.00. It could be profitable with about 21.75% income ratio when price of Lycium Chinese Miller is 16,800 won per kg.

• Journal of the Korean Ceramic Society
• /
• v.50 no.6
• /
• pp.410-415
• /
• 2013

$ZrB_2$-SiC ceramics are fabricated via hot pressing with different ratios of submicron or nano-sized SiC in a $ZrB_2$-20 vol%SiC system, in order to examine the effect of the SiC size ratio on the microstructures and physical properties, such as thermal conductivity, hardness, and flexural strength, of $ZrB_2$-SiC ceramics. Five different $ZrB_2$-SiC ceramics ($ZrB_2$-20 vol%[(1-x)SiC + xnanoSiC] where x = 0.0, 0.2, 0.5, 0.8, 1.0) are prepared in this study. The mean SiC particle sizes in the sintered bodies are highly dependent on the ratio of nano-sized SiC. The thermal conductivities of the $ZrB_2$-SiC ceramics increase with the ratio of nano-sized SiC, which is consistent with the percolation behavior. In addition, the $ZrB_2$-SiC ceramics with smaller mean SiC particle sizes exhibit enhanced mechanical properties, such as hardness and flexural strength, which can be explained using the Hall-Petch relation.

• Journal of Korean Society of Forest Science
• /
• v.99 no.6
• /
• pp.808-815
• /
• 2010

This study is to give informations about management Situations and investment returns to someone who will newly cultivate schizandra or expand area of culture. This study used IRR, B/C Ratio and NPV for beneficial analysis. We surveyed fifty one among schizandra cultivation farmhouses in chief producing districts Gangwon Inje, Gyeongbuk Munkyung, Kyungnam Sancheong and Jeonnam Whasoon in Korea from May till September in 2009. So this study surveyed about inputted labors and materials, land price and etc. by working process to calculate producing and operating cost. Fruits of schizandra are sold from 5,000 won to 6,000 won per kg at locals. And IRR(Internal Rate of Returns), B/C Ratio and incomes ratio is calculated by three senarios 5,000 won, 5,500 won and 6,000 won per kg at locals. Discount rate is 3.00%. As the result of this study IRRs are -16.00%, -6.91%, 0.40% one after another and B/C Ratios are 0.81, 0.89, 0.97 one after another. And schizandra cultivation isn't profitable. When price of schizandra fruits is 6,200 won per kg, IRR is 3.00% and B/C Ratio is 1.00. Therefore, if price of schizandra fruits is over 6,200 won per kg, we judge that it is profitable. And income ratio is 23.9% on 6,200 won per kg.

• Electrical & Electronic Materials
• /
• v.7 no.4
• /
• pp.281-288
• /
• 1994

According to spread volume of B(BiPbCuO) layer, composition ratio and each stage of sintering process, we studied stability of high Tc superconductor phase and generation and growth movement of superconducting phase. The dual layer composed of SrCaCuO and BiPbCuO compound were prepared to develop the Bi-2223 superconductor[108K] through interaction and diffusion during sintering process. The dual layer samples were sintered at 830.deg. C for 0-210 hours. From the result, the optimum conditions were : spread volume(A:B=1:0.6), sintering time(210h) and composition ratio(A:S $r_{2}$C $a_{2}$C $u_{2}$- $O_{x}$, B:B $i_{1.9}$P $b_{0.5}$C $u_{3}$ $O_{y}$) at 830.deg. C.. C.C.C.

• Korea Journal of Hospital Management
• /
• v.17 no.1
• /
• pp.79-112
• /
• 2012

The purpose of this study is to examine the differences of profitability based on the analysis of business and medical service performances of four hospitals in Incheon area with similar size. and to compare hospitals with the best and the worst performances and analyze the factors behind the differences. The differences could be caused by differences in medical service statistics, number of staff, and financial results, etc. The data was acquired through the homepage of the National Tax Service(financial statements for the fiscal year 2009) and the Medical Record Association of Incheon(medical service statistics for the years 2008 and 2009) along with questionnaire survey to the hospitals(personnel data for the year 2009). The results of the study are as follows. Medical profits to medical revenues ratio for the hospitals(referred as Hospital A, B, C, and D) shows, in order, C(8.2%), A(8.0%), B(7.8%), and D(7.4%). However, net income to medical revenues ratio shows otherwise: C(8.5%), D(5.8%), A(3.0%), and B(0.6%). Hospital B shows a high medical profit to revenue ratio but the lowest net income to revenue ratio due to large interest expenses. The leverage ratio of Hospital B is the highest (419.6%), resulting in a very low interest coverage ratio(1.1). On the other hand, Hospital C shows favorable results in both profit ratios, with 8.2% and 8.5% each. Hospital C has the lowest leverage ratio(53.0%) and the highest interest coverage ratio(34.9). Therefore, the results show Hospital C has the best performance while Hospital B the worst. The two hospitals(B and C) show similar results in certain areas and big differences in other areas. The area that has the biggest influence on financial results turns out leverage ratio. Hospital B shows 'very good' to 'good' results in terms of medical service statistics in general. However, the leverage ratio is too high and the liquidity ratio too low, resulting in a very low profit ratio. The results of this study have some limitations in terms of generalization as only four hospitals in Incheon area were selected for the study, resulting in a deficiency in the representativeness of the sample. Further studies with bigger sample size and deeper analysis are expected in this area.

• YAKHAK HOEJI
• /
• v.51 no.2
• /
• pp.108-114
• /
• 2007

The predominant Macrolides-Lincosamide-Streptogramin B (MLS$_B$) antibiotics resistance genes in staphylococci are erm(A) and erm(C). There is the phenomenon that the ratio of constitutively MLS$_B$ antibiotics resistance (cMLS) in erm(A) is much higher than in erm(C). Thus, we confirmed that the difference of the mutation ratio between erm(A) and erm(C) makes the phenomenon. We examined 8 staphylococci carrying inducibly expressed (iMLS) erm(A) or erm(C) genes. After overnight incubation in the presence of the non-inducer MLS$_B$ antibiotics, spontaneous mutants constitutively expressed MLS$_B$ resistance were selected. Against our expectation, the mutation ratio of erm(A) was lower than erm(C). Therefore, possibilities of other factors determining the ratio of cMLS phenotype might be concerned. All the mutants showed sequence alterations in translational attenuator and all the alterations seemed to give rise to change the second structure of mRNA to express constitutively. For erm(A), 4 different types of sequence deletions ranging from 72 bp to 122 bp and 3 different types of duplications ranging 24 bp to 93 bp were detected. Also, there were 9 different types of duplications ranging 15bp to 154bp in erm(C).

• The Korean Journal of Food And Nutrition
• /
• v.7 no.2
• /
• pp.95-99
• /
• 1994

In order to investigate the fatty acid composition of Korean pumpkins, this study was designed. Three samples of Korean pumpkins, A(yellowish ripe), B(unripe, 30 days old) and C(unripe, 20 days old) were used for fatty acid analysis by gas chromatography. The results were as follows : Pumkin C, B and A showed 10, 12 and 15 kinds of fatty acids, respectively. In case of palmitic acid(C16:0), pumpkin C, B and A showed 22.5%, 22.9% and 26.6%, respectively. In case of u linolenic acid(C18:3), pumpkin C, B and A showed 22.6%, 23.6% and 44.8%, respectively. In case of palmitoleic acid(Cl6:1), pumpkin C. B and A showed 12.4%, 10.1% and 0.5%, respectively. In case of oleic acid(C18:1), pumpkin C. B and A showed 9.2%, 7.7% and 2.8%, respectively, In case of stearic acid(C18:0), pumpkin C, B and A showed B.S%, 3.7% and 3.5%, respectively. The ratio of P/S was 1.4, 1.6 and 1.9 for sample C, B and A, respectively. The ratio of w-3/w-6 was 1.1, 0.9 and 2.6 for sample C, B and A, respectively. Through this study, the ripe pumpkin(sample A) was thought to be good enough in nutritional aspects of fatty acids, particularly a-linoleic acid, Cl8 : 3(u-3) series.

• Journal of the Korean institute of surface engineering
• /
• v.44 no.2
• /
• pp.60-67
• /
• 2011

Ternary B-C-N coatings were deposited on Si(100) wafer substrate from $B_4C$ target by RF magnetron sputtering technique in $Ar+N_2+CH_4$ gas mixture. In this work, the effect of reactant gas ratio, $CH_4/(N_2+CH_4)$ on the composition, kinds and amounts of bonding states comprising B-C-N coatings were investigated using two different bias power sources of continuous and unipolar DCs. In addition, the tribological properties of coatings were studied with the composition and bonding state of coating. It was found that the substrate bias power had an effect on chemical composition, and all of the obtained coatings were nearly amorphous. Main bonding states of coatings were revealed from FTIR analyses to be h-BN, C-C, C-N, and B-C. The amount of C-C bonging mainly increased with increase of the reactant gas ratio. From our studies, both C-C and h-BN bonding states improved the tribological properties but B-C one was found to be harmful on those. The best coating from tribological points of view was found to be $BC_{1.9}N_{2.3}$ composition.