• 제목/요약/키워드: Axial magnetic flux measurement

검색결과 9건 처리시간 0.023초

축방향 누설자속 측정에 의한 유도전동기의 고정자 결함검출에 관한 연구 (A Study of Stator Fault Detection for the Induction Motor Using Axial Magnetic Leakage Flux)

  • 신대철;김영환
    • 조명전기설비학회논문지
    • /
    • 제19권8호
    • /
    • pp.131-137
    • /
    • 2005
  • 본 논문은 유도 전동기에 대한 상태 모니터링 시스템의 도구로서 축방향 누설자속 측정 방법을 사용할 수 있는가를 평가하고 전동기에 대한 진단 알고리즘을 개발하는 것이다. 결함검출을 위해 전동기를 정지시키지 않고 전동기의 코일단에 설치된 자속코일로 누설자속 신호를 수집하여 전동기의 각종 결함을 검출하기 위해 시간과 주파수영역으로 신호를 분석한다. 전동기 각각의 결함에 대해 시간과 주파수 영역에서 특정 신호 현상이 검출되었다. 전원전압 불평형과 고정자 권선의 선간 단락은 축방향에서 측정된 고해상도의 누설자속 스펙트럼으로부터 특정 측대파와 회전자봉 통과주파수의 측대파를 분석함으로서 결함을 검출할 수 있다. 주파수 영역에서의 스펙트럼이 모니터링 목적으로 더욱 유용하다는 결론을 얻었다. 본 논문에서는 유도 전동기의 축방향 누설자속 측정이 진단 방법으로서 적합한 도구임을 증명하고 결함을 검출하기 위한 알고리즘을 개발하였다.

축방향 누설자속 측정에 의한 유도전동기의 회전자 결함검출에 관한 연구 (A Study of Rotor Fault Detection for the Induction Motor Using Axial Leakage Magnetic Flux)

  • 신대철;김영환
    • 조명전기설비학회논문지
    • /
    • 제20권1호
    • /
    • pp.132-137
    • /
    • 2006
  • 유도전동기에 대한 결함 검출의 도구로서 축방향 누설자속 측정 방법을 사용할 수 있는가를 평가하고 전동기고장 검출에 관한 진단 알고리즘을 개발하기 위한 회전자에 관한 2번째 논문이다. 결함 검출을 위해 운전 중인 전동기의 끝단에 설치된 자속코일 센서로 누설자속 신호를 수집하며 전동기의 각종 결함을 검출하기 위해 시간과 주파수 영역에서 신호를 분석하였다. 센서 신호 형상이 전동기 각각의 결함에 대해 시간과 주파수 영역에서 해석하였다. 전동기의 회전자 관련 격함인 회전자봉 파손, 단락환 파손 및 회전자 편심이 축방향에서 측정된 고해상도의 스펙트럼으로부터 검출할 수 있는 방법을 확인하였다. 누설자속 스펙트럼으로부터 특정 주파수와 회전자봉 통과주파수의 측파대를 분석함으로서 회전자 결함을 검출하는 방법을 알았다. 또 유도전동기에 대하여 축방향 누설자속 측정을 위한 최적의 자속코일센서 및 측정시스템을 검증하고 회전자 결함을 검출하기 위한 방법을 개발하였다.

심자도 측정을 위한 SQUID 센서 기술의 개발 현황 (Review of SQUID Sensors for Measuring Magnetocardiography)

  • 이용호;김진목;유권규;김기웅;권혁찬
    • Progress in Superconductivity
    • /
    • 제13권1호
    • /
    • pp.1-6
    • /
    • 2011
  • Measurement of magnetic signals generated from electric activity of myocardium provides useful information for the functional diagnosis of heart diseases. Key technical component of the magnetocardiography (MCG) technology is SQUID. To measure MCG signals with high signal-to-noise ratio, sensitive SQUID magnetic field sensors are needed. Present magnetic field sensors based on Nb SQUIDs have field sensitivity good enough to measure most of MCG signals. However, for accurate measurement of fine signal pattern or detection of local atrial fibrillation signals, we may need higher field sensitivity. In addition to field sensitivity, economic aspect of the SQUID system is also important. To simplify the SQUID readout electronics, the output voltage or flux-to-voltage transfer of SQUID should be large enough so that direct measurement of SQUID output can be done using room-temperature preamplifiers. Double relaxation oscillation SQUID (DROS), having about 10 times larger flux-to-voltage transfers than those of DC-SQUIDs, was shown to be a good choice to make the electronics compact. For effective cancellation of external noise inside a thin economic shielded room, first-order axial gradiometer with high balance, simple structure and long-baseline is needed. We developed a technology to make the axial gradiometer compact using direct bonding of superconductive wires between pickup coil and input coil. Conventional insert has mechanical support to hold the gradiometer array, and the dewar neck has equal diameter with the dewar bottom. Boiling of the liquid He can generate mechanical vibrations in the gradiometer array due to mechanical connection structure. Elimination of the mechanical support, and direct mounting of the gradiometer array into the dewar bottom can reduce the dewar neck diameter, resulting in the reduction of liquid He consumption.

Disk형 단상 SRM의 기본 특성 해석을 위한 자화곡선 측정 (Magnetization Curves Measurement for Fundamental Characteristics Analysis of Disk-type Single Phase SRM)

  • 이충원;이종한;이은웅;오영웅
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.91-93
    • /
    • 2003
  • Disk type Single Phase SRM(Switched Reluctance Motor) can be used axial direction magnetic flux and radial direction magnetic flux. In this paper, the flux linkage was measured according as rotor positions of disk-tyre single phase SRM, which is designed and manufactured in previous research. From the measured data, we got the magnetization curves, inductance profile and Co-energy.

  • PDF

자기누설 비파괴 검사 시스템에서 축방향 미소결함 측정에 관한 연구 (A Study on the Measurement of Axial Cracks in the Magnetic Flux Leakage NDT System)

  • 김희민;박관수;노용우;유휘룡;조성호;김동규;구성자
    • 한국자기학회지
    • /
    • 제22권2호
    • /
    • pp.49-57
    • /
    • 2012
  • MFL PIG는 배관의 단면적이 변화할 때 발생하는 누설 자기장을 검출하고, 검출 된 누설 자속 신호의 분포 및 크기를 이용하여 배관 내 외벽에 결함의 발생 유무를 검사하는 방법이다. 기존의 MFL PIG는 금속 손실이나 균열, 부식과 같은 결함을 검출하는데 효과적이었으나 배관 내 외부의 압력차로 인하여 발생하는 가로축 방향의 가늘고 긴 미소결함을 검출하기 위하여 원주 방향으로 자기장 누설을 최대화 할 수 있는 CMFL(Circumferencial MFL) PIG의 개발이 필요하다. 본 논문에서는 자계 해석 기법 및 3차원 비선형 유한요소법을 이용하여 CMFL PIG를 설계하고 배관의 결함 유무에 따른 누설 자계 분포를 분석하였다. 또한 CMFL PIG와 함께 결함 검출 성능 검증을 위한 모의시험 배관과 결함 및 고정 구조물을 제작하고, 이를 이용한 실험으로 누설 자계 신호를 측정하여 결함의 형상변화가 검출 신호에 미치는 영향을 비교 및 검토하였다.

Disk형 단상 스위치드 리럭턴스 전동기의 특성 해석 (Characteristics Analysis of Disk-type Single Phase SRM)

  • 이충원;이은웅;이종한;오영웅
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2003년도 하계학술대회 논문집 B
    • /
    • pp.988-990
    • /
    • 2003
  • Disk type Single Phase SRM(Switched Reluctance Motor) can be used axial and radial direction magnetic flux. Therefore, the energy density per unit of volume is high and the axis can be shorter than that of any other motor. In this paper, the flux-linkage was measured according as rotor positions of disk type single phase SRM, which is designed and fabricated in previous studies. From the measured data, we got the magnetization curves, inductance profile, co-energy and torque. Also, we compared the value of the measurement with the value of analysis through 3D FEM simulation.

  • PDF

분광학적 방법에 의한 Plasma Jet의 온도분석 측정 (Spectroscopic Measurement of Temperature Distribution in Some Plasma Jets)

  • 전춘생;박용관;임명선
    • 전기의세계
    • /
    • 제26권2호
    • /
    • pp.104-110
    • /
    • 1977
  • This paper investigates temperature distribution of plasma jets which used argon gas, and nitrogen gas mixed with argon as working fluids in spectroscopic method, and studies correlations between them main results are as follows; 1) The temperature at the center of plasma jet increases with are current and gas flow, and decreases with magnetic flux density along the axial direction. 2) The changing rate of temperature of plasma jet in the radial direction decreases rapidly beyond 2mm from central axis. 3) Temperature drop rate of plasma jet in the central axis direction appears most apparant beyond 13mm above the nozzle exit. 4) When argon gas mixed with a small amount of nitrogen, plasma temperature increases at same are current compared with the case of argon gas only.

  • PDF

3축 Strain Gauge와 Vector Single Sheet Tester를 이용한 전기강판의 자왜 특성 측정 (Measurement of Magnetostriction Characteristics of Electrical Steel Sheet using Three-axial Strain Gauge and Vector Single Sheet Tester)

  • 박찬혁;조현진;윤희성;하정우;김중경;고창섭
    • 전기학회논문지
    • /
    • 제63권8호
    • /
    • pp.1039-1045
    • /
    • 2014
  • Acoustic noise from a transformer, recently, has drawing more and more attentions. One of the main source of the noise is thought to be magnetostriction of the electrical steel sheets which compose transformer core. This paper deals with the magnetostriction of a highly grain-oriented electrical steel sheet measured by using a vector single sheet tester and a three-axial strain gauge. The results show that direction and axis ratio as well as the magnitude of the applied magnetic flux density contribute much to magnetostriction.

돌극형 회전화 단상 SRM의 쇄교자속 측정 (Measurement of Flux Linkage in Salient Pole Rotor Type Single Phase SRM)

  • 김준호;이은웅;오영웅;이민명
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.123-125
    • /
    • 2001
  • Salient pole rotor type single phase SRM(switched reluctance motor) uses the magnetic fluxes of radial and axial direction at the same time. Therefore the output power per unit volumn is very high and shaft length can be shorter than any other types of SRM with same output. Also, It can be manufactured with low cost thanks to simple structure and driving circuit. We already designed and manufactured prototype using the dynamic output equation of general rotating machine but the effect by salient pole structure was not considered. The most optimal design parameters for salient pole rotor type single phase SRM will be selected by comparing and analyzing the results from 3D FEM analysis, experimental values of the torque versus speed characteristics. and the nux linkage of prototype. Results for the former 3D FEM analysis and torque vs. speed characteristics were already obtained. Finally, we will measure the nux linkage of salient pole rotor type single phase SRM.

  • PDF