• 한국소음진동공학회논문집
• /
• 제21권6호
• /
• pp.580-586
• /
• 2011

This paper addresses the effect of transverse shear deformation and rotary inertia on the natural frequency of beams under axial loads. It has been reported in the author's paper using a finite element analysis that the Timoshenko effect in a rotating disk deceases and then increases again with increasing rotation speed. To validate the phenomenon, the simply-supported beams under uniform tension are selected in this study since they have exact solutions in vibration problem. The results show that the axial tension in beams would not make the Timoshenko effect decrease monotonically but could make the effect increase again unlike the results reported in the other studies for beams.

• International Journal of Fluid Machinery and Systems
• /
• 제2권2호
• /
• pp.136-146
• /
• 2009

Small axial fans have become widely used as cooling devices in recent years. Because of their increasing importance, studies have been conducted on ways to improve the performance and reduce the noise of such fans. In this report, a small axial fan with a diameter of 85 mm (a type popularity used in personal computer or workstation) was selected for further examination. The influence on aerodynamic performance and noise of such frame design parameters as blade tip clearance results in a decrease of discrete frequency noise and an increase of broad-spectrum noise. As for the most suitable design refinement in terms of fan efficiency, we found that the treatment of outlet corner roundness and altering spoke skew to the direction counter to that of fan rotation was effective.

• Tribology and Lubricants
• /
• 제39권2호
• /
• pp.35-42
• /
• 2023

Bearing is a mechanical component that supports loads and transmits rotation. As the application of high-value-added products such as semiconductors, aviation, and robots have recently become diverse and more precise, an accurate bearing performance prediction and evaluation technology is required. Bearing performance evaluation can be divided into evaluations based on bearing theory and on numerical analysis. An evaluation based on numerical analysis is a technique that has been highlighted because the problems that remained unsolved owing to time problems can be solved through recent developments in computers. However, current studies have the disadvantage of not considering the essential changes over time and bearing rotation. In this study, bearing performance evaluation based on rigid body dynamic analysis considering rotation and load over time is performed. Rigid body dynamic analysis is performed for deep groove ball bearing to calculate the load applied by the ball. The reliability of the analysis is verified by comparing it with the results calculated using bearing theory. In addition, rigid body dynamic analysis is performed for automotive wheel bearings to calculate the contact angle and load applied by the ball for cases where axial load and radial load are applied, respectively. The effect of rotation and load over time is evaluated from these results.

• 한국강구조학회 논문집
• /
• 제17권5호통권78호
• /
• pp.605-615
• /
• 2005

수평하중을 받는 콘크리트충전 각형강관 기둥의 축력과 변형능력의 관계를 조사하기 위하여 실험 및 해석적 연구를 수행하였다. 36개 기둥으로 구성된 실험 시리즈는 일정 축하중과 수평하중 하에서 반복실험을 실시하였다. 반복 수평하중을 받는 기둥이 저항할 수 있는 축하중을 보증내력 한계축력이라고 규정하였으며, 해석 모델은 수평하중을 받는 캔틸레버 기둥을 모델화하였다. 반복 횡하중을 받는 기둥의 축하중을 누적보증내력 한계축력이라고 정의하였다. 본 연구의 목적은 주어진 동일부재각에 부합하는 축력과 수평하중을 받는 콘크리트 충전강관 기둥의 보증내력 한계축력을 연구하기 위한 것이며, 두 번째는 콘크리트 충전강관 기둥의 누적보증내력 한계축력과 보증내력 한계축력의 비교가 본 연구의 목적이다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제37권
• /
• pp.36.1-36.7
• /
• 2015

Background: This study was performed to evaluate three-dimensional positional change of the condyle using three-dimensional computed tomography (3D-CT) following unilateral sagittal split ramus osteotomy (USSRO) in patients with mandibular prognathism. Methods: This study examined two patients exhibiting skeletal class III malocclusion with facial asymmetry who underwent USSRO for a mandibular setback. 3D-CT was performed before surgery, immediately after surgery, and 6 months postoperatively. After creating 3D-CT images by using the In-vivo $5^{TM}$ program, the axial plane, coronal plane, and sagittal plane were configured. Three-dimensional positional changes from each plane to the condyle, axial condylar head axis angle (AHA), axial condylar head position (AHP), frontal condylar head axis angle (FHA), frontal condylar head position (FHP), sagittal condylar head axis angle (SHA), and sagittal condylar head position (SHP) of the two patients were measured before surgery, immediately after surgery, and 6 months postoperatively. Results: In the first patient, medial rotation of the operated condyle in AHA and anterior rotation in SHA were observed. There were no significant changes after surgery in AHP, FHP, and SHP after surgery. In the second patient, medial rotation of the operated condyle in AHA and lateral rotation of the operated condyle in FHA were observed. There were no significant changes in AHP, FHP, and SHP postoperatively. This indicates that in USSRO, postoperative movement of the condylar head is insignificant; however, medial rotation of the condylar head is possible. Although three-dimensional changes were observed, these were not clinically significant. Conclusions: The results of this study suggest that although three-dimensional changes in condylar head position are observed in patients post SSRO, there are no significant changes that would clinically affect the patient.

• 대한기계학회논문집B
• /
• 제24권1호
• /
• pp.114-123
• /
• 2000

The flow structure around a rotating axial-fan was experimentally investigated using a phase averaging velocity field measurement technique. The fan blades were divided into 4 different phases, for which 500 velocity fields were acquired for each phase angle with a 2-frame PTV system. Velocity field measurements were also carried out at two planes parallel to the axis of rotation, with offsets toward the radial direction of the fan. For accurate synchronization of the PTV system with the phase of the axial fan, two synchronization circuits were employed with a photo-detector attached to the rotating shaft. The phase averaged velocity fields show periodic variations with respect to the blade phase. The periodic formation of vortices at the blade tip is also observed in vorticity contour plots. Locations of local maximum turbulence intensities in the axial and radial directions are found to be located in an alternating pattern. These experimental results can be used to validate numerical calculations and to understand the flow characteristics of an axial fan.

• 한국전자파학회논문지
• /
• 제10권4호
• /
• pp.628-635
• /
• 1999

본 논문에서는 중심주파수 1185 GHz인 Ku 밴드용 광대역 좌원형편파 마이크로스트립 안테나를 $2\times2$ 방 사소자를 기본으로 하는 시권셜 로테이션 배열 방볍($0^{\circ}$, $45^{\circ}$, $90^{\circ}$, $135^{\circ}$, 위상지연)을 이용하여 설계하고 $1\times2$ 방사소자를 기본으로 하는 시뭔셜로테이션 배열방법($0^{\circ}$, $90^{\circ}$, $180^{\circ}$, $270^{\circ}$, 위상지연 이용)과 비교 분석하였다. 실험을 위하여 $2\times2$ 방사소자를 기본으로 하는 시뭔셜 로테이션 배열로 중심주파수 11.85 GHz를 갖는 좌원형 편파 8x8 마이크로스트립 배열 안테나를 제작하고 측정한 결과 $1\times2$ 시권셜 로테이션 배열방법에 비해서 10 d dB 반사 대역폭은 1.57배 증가한 10.51-12.74 GHz(약 18.82 %)이고, 3dB 축비 대역폭(시율레이션 결과)은 1 1.25배 증가한 11.43 -12.5 GHz(약 9.03 %)이고 이득은 25.4 dB로 나타났으며, 이러한 측정결과는 시율레이션 결과와도 거의 일치하였다.

• The Journal of Advanced Prosthodontics
• /
• 제9권4호
• /
• pp.278-286
• /
• 2017

PURPOSE. The aim of this study was to determine the influence of long base lengths of a fixed partial denture (FPD) to rotational resistance with variation of vertical wall angulation. MATERIALS AND METHODS. Trigonometric calculations were done to determine the maximum wall angle needed to resist rotational displacement of an experimental-FPD model in 2-dimensional plane. The maximum wall angle calculation determines the greatest taper that resists rotation. Two different axes of rotation were used to test this model with five vertical abutment heights of 3-, 3.5-, 4-, 4.5-, and 5-mm. The two rotational axes were located on the mesial-side of the anterior abutment and the distal-side of the posterior abutment. Rotation of the FPD around the anterior axis was counter-clockwise, Posterior-Anterior (P-A) and clockwise, Anterior-Posterior (A-P) around the distal axis in the sagittal plane. RESULTS. Low levels of vertical wall taper, ${\leq}10-degrees$, were needed to resist rotational displacement in all wall height categories; 2-to-6-degrees is generally considered ideal, with 7-to-10-degrees as favorable to the long axis of the abutment. Rotation around both axes demonstrated that two axial walls of the FPD resisted rotational displacement in each direction. In addition, uneven abutment height combinations required the lowest wall angulations to achieve resistance in this study. CONCLUSION. The vertical height and angulation of FPD abutments, two rotational axes, and the long base lengths all play a role in FPD resistance form.

• 한국음향학회지
• /
• 제16권6호
• /
• pp.61-67
• /
• 1997

압전 회전센서(Piezoelectric Gyroscope)는 물체의 회전속도를 감지하기 위한 센서로서 압전효과를 이용해 코리올리스힘(Coriolis Force)을 측정하는 센서이다. 기존에 사용되고 있는 압전 회전센서는 1축형이 주종을 이루고 있는데 비하여 본 연구에서는 한 차원 발전된 2축형의 회전센서를 고안, 제작하였다. 이러한 새로운 구조에 대한 검토 및 고찰을 위해 유한요소법 (Finite Element Method) 을 통한 동적 해석을 실시하여 구조의 타당성을 검증하고 각 설계인자 변화에 따른 센서의 특성변화를 조사하였다. 또한 그 결과를 토대로 직접 회전센서를 제작하여 그 성능을 평가, 비교하였다. 나아가 센서의 특성평가를 위한 회전 시뮬레이터를 구성한 후 정량적인 실험을 통해 제작된 센서의 반응을 조사하였으며, 그 결과 본 논문에서 개발된 2축형 센서는 두 방향의 회전력에 대한 우수한변별도 및 감도를 나타내어 새로운 형태의 회전 센서로서의 사용가능성을 확인할 수 있었다.

• 한국공간구조학회논문집
• /
• 제9권1호
• /
• pp.69-78
• /
• 2009

최근의 근단층지반운동인 Northridge 지진(1994, 미국), Kobe 지진(1995, 일본), Izmit 지진(1990, 터키)은 큰 수직성분의 영향으로 건축물 및 교량에 심각한 손상을 주었다. 일반적인 건축구조물의 내진설계에서 지진하중의 수직성분을 고려하여 설계하는 경우는 드물다. 본 연구에서는 지진하중의 수직성분 영향의 고려 유무에 따른 예제구조물의 기둥부재의 축력의 변화와 부재 단부의 소성힌지회전각을 산정하여 시스템의 손상상태를 평가하여 보았다. 해석결과 축력의 증가는 기둥부재의 손상에 의한 전체 구조시스템의 story collapse mechanism의 가능성을 주게 되므로 근단층지반운동이 예상되는 부분에서는 지진하중의 수직성분에 대한 영향을 고려하여야할 것으로 판단된다.