• Textile Coloration and Finishing
• /
• v.23 no.3
• /
• pp.195-200
• /
• 2011

Silicone-coated fabric were treated by oxygen low temperature plasma to improve the adhesion. The surface of silicone-coated fabric was modified with gaseous plasma of several discharge power in the presence of oxygen gas at 1Torr pressure. Oxygen plasma treatment introduces oxygen-containing functional groups and micro-pittings on the silicone-coated fabric surface. The treated fabrics with oxygen low temperature plasma were measured by contact angle analyzer and XPS(X-ray photoelectron spectroscopy), and interfacial adhesion was measured by T-peel test. The surface of fabric was investigated by SEM photographs. The chemical and physical modification of the surface wettabillity by plasma treatment can increase the adhesion.

• Journal of the Korean Society for Geothermal and Hydrothermal Energy
• /
• v.8 no.2
• /
• pp.27-35
• /
• 2012

Five zero energy house models developed in Korea for the purpose of the energy performance were compared and analyzed in the study. The standard passive house model applying common technology and efficient energy performance elements was proposed. Standard passive house 5 models have been developed commonly aiming at 100% energy saving, applying high-performance and high-efficiency exterior thermal insulation, using 3 low-e coated window system, and targeting average 0.65 ACH to enhance privacy. Energy recovery ventilators and dry and cold radiant heating floor has been partially applied. Eco-design techniques such as the awning device, heat insulating door, using natural light have been used. Solar and geothermal systems as the application of renewable energy technologies have been commonly applied. And fuel cells were applied to a partial model. The standard model based on common technical elements and average performance of each element and obtained from five model analysis has been proposed in the study.

• Journal of the Korean housing association
• /
• v.22 no.2
• /
• pp.131-139
• /
• 2011

This study is to examine architectural designers' views on the correlations between components and contextual principle of the roadside building facade with the roadside building facade on the border of Asian Culture Center in Gwangju which is expected to undergo a great change by public policies. For setting direction of the roadside building management at the region examined, height of facade, advertisement/signboard, security of continuity through surface pattern management, nodes building, array of height by story, awning/arcade and locality of advertisement/signboard should be induced to design with locality and consideration of local characteristics with silhouette, window and external colors is needed for discrimination from other cities. Regarding the realization method important thing was found that the planning and implementation of architectural design guidelines, architectural aesthetics of the pre-hearing enhancement, active citizen participation, and then additional landscape screening system, incentive schemes, landscape designation of landscape zone was found to be a major realization system.

• Korean Institute of Interior Design Journal
• /
• v.21 no.4
• /
• pp.114-120
• /
• 2012

There are lots of buildings which were built before the Legislation on building energy rating system. Remodeling of the buildings would be required for an improvement of the building energy rating system was enforced by the government. In the Passive Building Design, Elements which will be used for the remodeling are Insulation, Window, External venetian blind, Heat exchanger. The Purpose of this study is to indicate a Method for the improvement of Energy saving by an analysis of Construction Cost, Cost Evaluation, Energy performance Efficiency in applied design elements. In this study, the remodeling of existing public buildings to improve energy efficiency rating was applied to extract the elements of design-specific energy performance, efficiency, and the application of the designs that has been analyzed. The results were as follows: applying the design-specific cost-effective investment that represents the economy (investment efficiency/%) surveyed the average insulation(7.0%), triple glazed windows(10.1%), double glazed windows(12.1%), external shading(24.5%), and Heat(77.2%) were analyzed in order to be more efficient. Analysis of the basis of information on the existing public buildings to improve energy efficiency rating for the remodeling depending on driving conditions at a degree of individual difference. The main effect, however, depending on economic investment, design elements, heat exchangers, external awning, double glazed windows, triple glazed windows, insulation, is recommended as review of the order shall be determined.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.4
• /
• pp.339-345
• /
• 2020

This study used a real-scale model experiment to reproduce internal fires in residential buildings such as a multi-dwelling unit, in order to prevent damage caused by tens of thousands of fires witnessed each year and to take measures to cope with them. For experimental conditions, different opening sizes were applied to measure and analyze the heating temperature of the exterior wall. Results drawn are as follow : On top of this, the experimental conditions had whether to install shading and put a shading length differently, before measuring and analyzing the heating temperature of the exterior wall. Subsequent results were drawn as shown below. Based on the maximum temperature, the temperature was lowered as much as around 90℃ at 150mm, around 150℃ or over at 300mm and over 175℃ at 450mm. It also turned out that the difference in maximum temperature dropped by around 180℃ or over. This indicated that the shading installation works well in lowering flame temperature generated by fire spread of the exterior wall.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.3
• /
• pp.101-109
• /
• 2012

Recently, the roof garden of the large commercial facilities has been changed as a complex cultural space follow the users' diverse needs. It is focused on large commercial facilities on Seoul and Gyeonggi area but large commercial facilities of the province still has not been able to respond to the needs of users. Thus, the present condition of roof gardens was compared space components with physical environmental factors in Seoul, Gyeonggi and Daejeon, Chungcheong. Throughout the comparison, roof gardens in Daejeon and Chungcheong area were focused on finding ways to improve As a result, roof gardens in Seoul and Gyeonggi area were applied to a variety of factors in space components experience, learning, performance, exhibition and etc. It is composed to take place of various acts in the roof garden. On the other hand, roof gardens in Daejeon and Chungcheong were not applied a variety space components by comparing Seoul and Gyeonggi area. Physical environmental factors also were insufficient by comparing Seoul and Gyeonggi area the landscape, awning facilities, amenities for handicapped. As described above, space components and physical environmental factors in Daejeon and Chungcheong area roof gardens were insufficient. To perform the role of the roof garden changing as a complex cultural space and to confront to the users' needs space component such as learning, performance, exhibition should be considered during planning. And physical environmental factors supportable space components should be considered together.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.33 no.4
• /
• pp.234-239
• /
• 2013

This study investigated the effects of drying methods and drying time on the changes in anthocyanin content in colored barley. Colored barley cultivar Boanchalbori was harvested at a time when the anthocyanin content was the most and dried in afield. The harvested barley was then treated by two methods, sun drying and shade drying, for 4, 8, 24, and 32 h. The moisture content of the sun-dried barley decreased slightly faster than shade-dried samples, but the difference was not statistically significant. Chemical analysis indicated that the samples dried under shaded conditions had slightly higher crude fiber and lower nitrogen free extract, but the difference was not statistically significant. There was no difference in the total digestible nutrients between the two methods. In the case of sun-dried barley, the anthocyanin content decreased compared to the control and shade-dried samples after drying for 4 h (p < 0.05), was maintained at a constant level at 24 h, and then decreased at 32 h. In case of shade-dried barley, the anthocyanin content decreased gradually with the drying time, and a significant decrease was found at 24 h of drying (p<0.05) as compared to the control. The shade-dried method was more successful in reducing anthocyanin loss than the sun-dried method (p<0.05). There was a slight decrease in 1,1-Diphenyl-2-Picrylhydrazyl radical scavenging with drying time in the shade-dried method, and a significant decrease after 4 h with the sun-dried method. These results showed that covering with a two-layer awning was advantageous to dry colored barley in the field conditions.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.33-33
• /
• 2022

Rice (Oryza sativa L.) is a widely studied domesticated model plant. Seed awning is an unfavorable trait during rice harvesting and processing. Hence, awn was one of the target characters selected during domestication. However, the genetic mechanisms underlying awn development in rice are not well understood. In this study, we analyzed the genes for awn development using a mapping population derived from a cross between the Korean indica cultivar 'Milyang23' and NIL4/9 (derived from a cross between 'Hwaseong' and O. minuta). Two quantitative trait loci (QTLs), qAwn4 and qAwn9 were mapped on chromosome 4 and 9, respectively, increased awn length in an additive manner. Through comparative sequencing analyses parental lines, LABA1 was determined as the causal gene underlying qAwn4. qAwn9 was mapped to a 199-kb physical region between markers RM24663 and RM24679. Within this interval, 27 annotated genes were identified, and five genes, including a basic leucine zipper transcription factor 76 (OsbZIP76), were considered candidate genes for qAwn9 based on their functional annotations and sequence variations. Haplotype analysis using the candidate genes revealed tropical japonica specific sequence variants in the qAwn9 region, which partly explains the non-detection of qAwn9 in previous studies that used progenies from interspecific crosses. This provides further evidence that OsbZIP76 is possibly a causal gene for qAwn9. The O. minuta qAwn9 allele was identified as a major QTL associated with awn development in rice, providing an important molecular target for basic genetic research and domestication studies. Our results lay the foundation for further cloning of the awn gene underlying qAwn9.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.6
• /
• pp.60-74
• /
• 2018

This study was to investigate the pedestrian's thermal environments in the North Sidewalk of E-W Street during summer heatwave. We carried out detailed measurements with four human-biometeorological stations on Dongjin Street, Jinju, Korea ($N35^{\circ}10.73{\sim}10.75^{\prime}$, $E128^{\circ}55.90{\sim}58.00^{\prime}$, elevation: 50m). Two of the stations stood under one row street tree and hedge(One-Tree), two row street tree and hedge (Two-Tree), one of the stations stood under shelter and awning(Shelter), while the other in the sun (Sunlit). The measurement spots were instrumented with microclimate monitoring stations to continuously measure microclimate, radiation from the six cardinal directions at the height of 1.1m so as to calculate the Universal Thermal Climate Index (UTCI) from 24th July to 21th August 2018. The radiant temperature of sidewalk's elements were measured by the reflective sphere and thermal camera at 29th July 2018. The analysis results of 9 day's 1 minute term human-biometeorological data absorbed by a man in standing position from 10am to 4pm, and 1 day's radiant temperature of sidewalk elements from 1:16pm to 1:35pm, showed the following. The shading of street tree and shelter were mitigated heat stress by the lowered UTCI at mid and late summer's daytime, One-Tree and Two-Tree lowered respectively 0.4~0.5 level, 0.5~0.8 level of the heat stress, Shelter lowered respectively 0.3~1.0 level of the heat stress compared with those in the Sunlit. But the thermal environments in the One-Tree, Two-Tree and Shelter during the heat wave supposed to user "very strong heat stress" while those in the Sunlit supposed to user "very strong heat stres" and "exterme heat stress". The main heat load temperature compared with body temperature ($37^{\circ}C$) were respectively $7.4^{\circ}C{\sim}21.4^{\circ}C$ (pavement), $14.7^{\circ}C{\sim}15.8^{\circ}C$ (road), $12.7^{\circ}C$ (shelter canopy), $7.0^{\circ}C$ (street funiture), $3.5^{\circ}C{\sim}6.4^{\circ}C$ (building facade). The main heat load percentage were respectively 34.9%~81.0% (pavement), 9.6%~25.2% (road), 24.8% (shelter canopy), 14.1%~15.4% (building facade), 5.7% (street facility). Reducing the radiant temperature of the pavement, road, building surfaces by shading is the most effective means to achieve outdoor thermal comfort for pedestrians in sidewalk. Therefore, increasing the projected canopy area and LAI of street tree through the minimal training and pruning, building dense roadside hedge are essential for pedestrians thermal comfort. In addition, thermal liner, high reflective materials, greening etc. should be introduced for reducing the surface temperature of shelter and awning canopy. Also, retro-reflective materials of building facade should be introduced for the control of reflective sun radiation. More aggressively pavement watering should be introduced for reducing the surface temperature of sidewalk's pavement.

• Journal of Energy Engineering
• /
• v.26 no.4
• /
• pp.29-34
• /
• 2017

Factors of Zero-Energy Building are divided into active and passive factor. Passive factor means insulation, heat bridge of building like insulation, windows and doors, awning, outside etc. and active factor means energy output and efficiency coefficient. Energy output of active factor is achieved by new generating energy. This study anticipated how many effects will be produced when not new generating energy but Vehicle to Building; V2B, bi-directional charging and discharging technology, is applied to Zero-Energy Building. In new generating energy, power generation will be anticipated by geography and climate, but in V2B, several input variable like user's discharging intention and number of usable charger etc. should be considered. We can check how much V2B contribute to the Zero-Energy Building by anticipated results, and that results should be anticipated by using probabilitic method because there is few statistical data. This study anticipate change of charging and discharging pattern, based by Demand Response slot, by using monte carlo method among the probabilitic methods.