• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 춘계학술대회
• /
• pp.164-165
• /
• 2015

최근 친환경 에너지와 주변 환경을 응용하는 기술이 발달함에 있어 환경 에너지의 관심이 높아지고 있다. 특히 태양빛은 에너지와 환경적 측면에서 중요한 부분을 차지하고 있으므로 그러한 태양열을 이용한 장치의 연구는 사람의 쾌적한 삶을 위해 필요하다고 할 수 있을 것이다. 그중에 실내로 유입되는 태양빛을 조절하는 장치로 커텐, 블라인드, 자외선 차단 유리등 여러 가지 있지만 상업건물에서 가장 효과적으로 많이 사용되고 있는 시스템 중 하나는 Awning시스템을 많이 사용하고 있다. 이러한 제품은 오존층 문제등의 환경에 관심이 높아지면서 전원주택 및 상가 등을 중심으로 새롭게 관심이 고조되고 있으며, 모양과 기능이 다양하게 개발되고 있다. 그러나 기존의 Awning 시스템은 포리에스테르 또는 아크릴 원착사 원단을 이용한 고정식과 접이식이 있으며 차양시스템은 수동과 자동이 있다. 이러한 시스템은 대부분 태양의 직사광선이나 비를 차단 할 수 있는 기능만 가지고 있다. 본 논문에서는 Awning 시스템에 솔라 판넬을 이용한 친환경 자동 Awning 시스템의 개발이 필요하다. 이 Awning 시스템은 직사광선의 차양 및 빗물방지 와 태양에너지를 얻을 수 있도록 개발 한다.

• KIEAE Journal
• /
• 제17권3호
• /
• pp.5-13
• /
• 2017

Purpose: Various studies have been performed to address the issue of increased energy use by buildings. In particular, research on complex envelopes that combines diverse envelope element techniques is currently in progress in the building sector. The present study aimed to develop an awning system using a light shelf, and to verify its validity through performance evaluation. Method: In the present study, a testbed was established for the performance evaluation of the awning system using a light shelf, and the uniformity ratio and lighting energy consumption were compared and analyzed relative to those with no awning and light shelf installation (Case 1), awning installation (Case 2), and light shelf installation (Case 3). Result: 1) In the present study, an awning system using a light shelf (Case 4) where an opening is made on the awning screen and natural light can be introduced through the light shelf located at the bottom was developed. 2) The optimum standard for Case 4 obtained through the performance evaluation was a 0.6m lighting length and a 2m extension length at a light shelf angle of $30^{\circ}$. 3) Case 4 with the optimum standard had a 5.5% lower uniformity ratio than Case 2, but had a higher uniformity ratio than Case 1 and Case 3. 4) Case 4 with the optimum standard showed 13.3%, 44.6%, and 0%~8.7% lighting energy reductions compared to Case 1, Case 2, and Case 3, respectively. 5) Based on the above results, Case 4 suggested in the present study was found to be effective for indoor light environment improvement and lighting energy reduction.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2007년도 학술발표회 논문집
• /
• pp.527-528
• /
• 2007

• 한국염색가공학회지
• /
• 제27권1호
• /
• pp.35-49
• /
• 2015

This paper investigated optimum process conditions of coating yarn for awning fabric. For this purpose, the simulation for processability and yarn quality using SPSS statistics package was carried out, and PP/TPO and PET/PVC coating yarns specimens were made with variation of extruder temperature and feed speed of core yarn on the yarn coating machine for examining simulation result. It was revealed that optimum coating conditions of PP/TPO 1000d coating yarn were extruder temperature $150^{\circ}C$, and core yarn feed speed 400~500m/min. Mechanical property and thermal shrinkage of PP/TPO coating yarn made at this conditions were best and core evenness rates of these coating yarns by yarn compression tester were also superior, which was certified by SEM photograph. In addition, these experimental results were coincided with simulation results. It was found that, in PET/PVC coating yarn, yarn physical properties between 1500d and 1200d coated yarns were not shown any difference, and core evenness rates of these coating yarns were superior. It revealed and concluded that these simulated coating conditions are applicable to production field.

• Plant Resources
• /
• 제6권2호
• /
• pp.98-101
• /
• 2003

Colored apiculus, awn, and long empty glume are indicators of wildness and are usually eliminated during rice domestication. Genetic analysis was conducted to clarify the inheritance patterns of awn, apiculus color, and long empty glume in Korean rice collection. Based on individual characterization of F$_2$ progenies derived from crosses between parents with colorless and purple apiculus, two (3 colored: 1 colorless) or three dominant genes (9 purple: 3 red: 4 colorless) are estimated as controlling this character by simultaneous complementary action. Different inheritance systems were detected between S237 and S245 of 'Shareibyeo' which belong to the weedy type. To determine the genes responsible in awning and long empty glume characters, the inheritance of landrace varieties of rice ('Naengdo' and 'Yuna') was investigated. In the crosses of awned land race and awnless cultivar, three dominant genes are supposed to control the awning genetic system by 63 awned: 1 awnless individual. As for long empty glume, one recessive gene, g-l on the chromosome 4, was the one controlling the segregation ratio of 3 normal empty: 1 long empty glume. By analyzing the Korean rice collection, the inheritance systems of these wild characters may lead to a better understanding of rice domestication in the future.

• 한국안전학회지
• /
• 제38권3호
• /
• pp.85-92
• /
• 2023

A safety helmet is considered the last gear to protect workers from harmful and dangerous events occurring on industrial sites. Recently, interest in the importance of personal protective equipment design reflecting individual characteristics has been emphasized to improve usability and convenience. However, it has been found that if it is inconvenient to wear or has poor work efficiency, it will not be used well or will be used incorrectly. In this study, an investigation was performed with 35 questions, direct observation, and intensive interviews of construction workers to determine the inconvenience and problems of wearing safety helmets. Moreover, managers of 9 construction sites in 6 cities were asked about the performance and design of safety helmets. As a positive answer, it was found that the brim (awning) of the safety helmet was shortened to give the safety glasses a light-shielding function. In addition, an upward adjustment all-in-one type safety helmet was requested. On the other hand, it was revealed that negative answers felt uncomfortable due to the brim (awning) on the front of the helmet. Based on the survey results, a new helmet model suitable for construction site activities was presented, and wearability improvement determinants were discovered through performance and design improvement.

• 한국수정란이식학회지
• /
• 제26권2호
• /
• pp.141-145
• /
• 2011

Seven male Himalayan tahrs were strongly assumed to have accidently fed on foreign bodies in 2007. At the time, zoo caretakers witnessed missing fence padding, such as carpet, plastic awning, and ropes. The incident occurred the morning after the items had been set up to protect indigenous, wild long-tailed gorals from self injury caused by head butting the steel fence. Adult male Himalayan tahrs were obviously suspected of mostly eating the paddings mainly composed of carpet, thin and long plastic awning, and ropes. Even though they had not shown digestive problems, surgery was determined necessary in order to remove any indigestible foreign bodies. Left flank rumenotomy was conducted on seven male Himalayan tahrs from April to May, 2011. After anesthesia with xylazine, rumenotomy was performed on a concrete floor, with legs and head secured by ropes. No access to water and hay prior to operation for two days was needed to make the surgical procedure done quickly. Two sheets of small hand towels protecting against inflow of ruminal contents were beneficial during surgery. Antibiotics were administered intramuscularly for seven days. No abscesses at the surgical site were found after surgery. Like domestic ruminants, wild ruminants also ingest metalic or non-metalic, indigestible foreign bodies by accident. Therefore, simplified rumenotomy must be developed to apply to those wild animals to lengthen their longevity and to advance the quality of life in captivity. This case report is the first showing how to perform rumenotomy of Himalayan tahr, a wild ruminant, in Korea.

• KIEAE Journal
• /
• 제14권6호
• /
• pp.5-13
• /
• 2014

Various studies on lighting energy savings are conducted, given that lighting energy consumption accounts 23.5% of building energy consumption. Especially, external type light shelf's efficiency is acknowledged; however, its application is limited in Korea, where high rise building ratio is high, due to high wind pressure. This study delves into natural lighting system to cope with wind pressure, and proposes the punching plate-installed light shelf. This study actually draws lighting energy output, according to whether the punching plate is applied through the test-bed, and verifies the effectiveness of the punching plate-installed light shelf. The conclusion is presented below: First) The result of performance evaluation of light shelf with the punching plate in winter solstice showed that the awning area decreased as the opening ratio increased so that the indoor distributed illumination tended to increase, and $-40^{\circ}$ which was advantageous for awning was determined as the proper angle. Second) The light shelf with the punching plate in spring/autumn equinox shows improved lighting according to the angle, and the appropriate angle of light shelf with the punching plate has increased to $15^{\circ}$ and $20^{\circ}$ according to the opening ratio in comparison to $5^{\circ}C$ which is the appropriate angle of light shelf with no punching plate due to the reflection area reduced by the reflecting plate with holes. Third) The result of performance evaluation of light shelf with the punching plate in summer solstice showed that the lighting performance tended to decrease as the opening ratio increased. 4) The light shelf with the punching plate incurs a 50% energy loss in comparison to the light shelf with no punching plate. However, its effectiveness has been proven in the aspects that it can bring a 50% energy saving in comparison to the case with no installation of light shelf and that it can be designed in response to wind pressure on the high floors.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 춘계학술대회
• /
• pp.743-744
• /
• 2016

현재 그린에너지로 부상하고 있는 태양광발전으로 인하여 많은 시설의 전력을 태양광으로 대체함으로 많은 에너지 및 공해 및 환경오염 요소를 줄여나가고 있다. 지금도 많은 연구가 되고 있으며 각종 응용분야에 접목을 시도하고 있다. 본 논문에서는 태양광 패널을 간판과 융합하여 낮에는 에너지를 생성하고 밤에는 간판 역할을 함으로 간판에 사용되는 에너지를 보다 절약 할 수 있는 장점을 가진다 또한 낮 시간때에는 천막과 같은 역할을 함과 동시에 에너지를 발전함으로 사용 용도가 높을 것으로 예상된다.

• 한국지열·수열에너지학회논문집
• /
• 제18권1호
• /
• pp.1-11
• /
• 2022

As abnormal climates occur due to the increase in greenhouse gases at home and abroad, various problems such as human casualties, crop damage, energy depletion, and economic loss due to heat diseases, which are one of the extreme climate phenomena, are following one after another. In response, the government has established the 'Climate Crisis Response Special Committee' since 2018, when it recorded the greatest damage in history due to heat waves, and has been carrying out budget formation and reform of laws and systems every year to respond to heat waves. However, in relation to the heat wave damage reduction facility that is being expanded with a large budget, there is no prior research related to the degree of heat loss due to the use of the facility, the difference in effects between specific groups, and the economic effect that comes back compared to the invested budget. Therefore, from a midto long-term perspective, it is expected that it will be difficult to establish a clear direction for policy making. Therefore, in this study, representative facilities were selected according to the principle of heat reduction among the currently expanded heat damage reduction facilities, and a questionnaire survey was conducted for users of each reduction facility (waterfall, awning, pond, and elastic pavement). Accordingly, the change in the sense of heat according to the use of the heat damage reduction facility was checked, and the change in the sense of heat according to the group characteristics (gender, age, metabolic rate) was analyzed to examine the characteristics of the relationship between the facility and the users.