• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3051-3059
• /
• 2015

In this study, the effect of corrugation angle on thermal performance of corrugated plate is numerically investigated with an aim to develop humidifying element. Numerical analysis was conducted for a range of corrugation angle (from $0^{\circ}/0^{\circ}$ to $60^{\circ}/60^{\circ}$ for equal angle and from $15^{\circ}/0^{\circ}$ to $15^{\circ}/60^{\circ}$ for unequal angle). Results revealed that both j and f factor increased as corrugation angle increased. Especially, f factor increased significantly at high corrugation angles. j and f factors of unequal angle plates and those of equal angle (obtained by averaging unequal angles) plates were approximately the same. The largest $j/f^{1/3}$, which implies the largest heat transfer rate per consumed power, was obtained at $15^{\circ}/15^{\circ}$. Existing correlations under- or over-predicted the present numerical results.

• PNF and Movement
• /
• v.18 no.1
• /
• pp.35-44
• /
• 2020

Purpose: The purpose of this study was to investigate the effect of the simultaneous abdominal drawing-in maneuver (ADIM) on the muscle activity of the ipsilateral trunk and leg during proprioceptive neuromuscular facilitation (PNF) leg flexion, adduction, and external rotation with knee flexion (D1) patterns. Methods: The participants were 20 healthy adult males and females (18 males and 2 females). The maneuvers were performed by a physical therapist who fully understands the PNF leg patterns (D1) and their application in clinical practice. The participants were trained and allowed to practice for 15 minutes prior to applying ADIM, to ensure adequate learning as evidenced by the pressure biofeedback unit. In this study, we measured the muscle activity of the trunk and leg when the PNF leg pattern (D1) was performed by the physical therapist either sustaining or releasing the ADIM. Muscle activity was measured on the right transverse abdominis muscle (TRA), the external abdominal oblique muscle (EO), the internal abdominal oblique muscle (IO), the erector spinae muscle (ES), the vastus medialis oblique muscle (VMO), the vastus lateralis oblique muscle (VLO), and the tibialis anterior muscle (TA) and compared using the mean values from averaging three repeated measurements. Results: The muscle activity of the transversus abdominis, the external abdominal oblique, the internal abdominal oblique, the vastus medialis oblique, and the vastus lateralis oblique was significantly greater (p < 0.05), and the muscle activity of the erector spinae was significantly less (p < 0.05) during PNF leg pattern (D1) when the ADIM contraction was sustained compared to when it was not. Conclusion: These results suggest that sustaining ADIM during PNF leg pattern (D1) training increases the trunk and leg muscle activity, resulting in more effective training.

• Korean Journal of Environmental Biology
• /
• v.26 no.3
• /
• pp.252-263
• /
• 2008

The purpose of this study was to determine trophic state, based on nutrients (TN, TP), transparency (SD), and chlorophyll-${\alpha}$ (Chl) and identify their empirical relations of TN-Chl, TP-Chl and Chl-SD depending on the dataset used along with dynamics of conductivity and suspended solids. Analysis of trophic states showed that more than half of 36 reservoirs were judged as eutrophic-hypertrophic conditions depending on the trophic variables. Seasonal values of TP varied by nearly 500% and showed greater in August than any other months. In contrast, TN varied within less than 90% and all monthly mean values of TN were never fall less than 1.2 mg L$^{-1}$ indicating low seasonal variations and high ambient concentrations (eutrophic-hypertrophic state). Analysis of empirical relations in the trophic variables showed that transparency had greater functional relations with Chl (R$^2$=0.31, p<0.001) than TP (R$^2$=0.15, p<0.001) and TN (R$^2$=0.20, p<0.001). Ratios of TN : TP in the ambient water indicated that most reservoirs showed a potential phosphorous limitation on the algal growth. Thus, algal biomass, based on Chl values, was more regulated by phosphorous than nitrogen. Analysis of linear regression model, based on log-transformed annual mean values, showed that only 30% in the variation of Chl was explained by TP (R$^2$=0.295, p=0.001, n=36) and 15% by TN (R$^2$=0.151, p=0.019, n=36). However, linear regression model, based on individual system, showed that Chl-TP model had strong positive relations (R$^2$=0.62, p=0.002, n=12), whereas the model had no any relations (p=0.892, n=12). Overall, our data suggested that averaging effect in the empirical model developments may influence the significance in the statistical analysis.

• Radiation Oncology Journal
• /
• v.7 no.1
• /
• pp.15-22
• /
• 1989

Investigations were carried out into the time-and dose-related changes in acute skin reaction following graded single dose (20,30 and 40 Gy) of x-ray irradiation in Wistar rats, in order to evaluate the radioprotective effect of Diethon on skin. For the duration of skin response over 1. 5 score in dose of 40 Gy, the Diethone group of 24.7 days was significantly different (p<0.02) from that of control (29.8 days) and vaseline (29.2 days) groups, it was $17.1\%$ diminution of skin response period compared with that of control group. By the averaging daily scores for 10 days during peak skin reaction the mean scores were obtained. Mean score of Diethone group $(2.43\pm0.22)$ was significantly different (p<0.01) from that of control $(2.91\pm0.23)$ and vaseline $(2.81\pm0.18)$ groups of 40Gy dose. By iso-effect dose obtained at level of 2.5 score the dose reduction factor (DRF) was 1.41 which reduced radiation dose of $41\%$ by radioprotective effect of Diethone. From this experimental data, it may be possible to give higer radiation dose to large and/or radioresistant tumor mass rather than conventional treatment doses for improving therapeutic ratio by using topical application of skin radioprotector.

• The Journal of Korean Medicine
• /
• v.20 no.3 s.39
• /
• pp.36-44
• /
• 1999

Objectives: It has been well known that electroacupuncture(EA) has an analgesic effect and there is a pain control system in the central nervous system(CNS). The pain control system is composed of three major nuclei, which are periaqueductal gray(PAG), raphe nuclei, and the pain inhibitory complex located in the spinal cord. It has been suggested that the analgesic effect of EA might be the result of activation of the pain control system in the CNS. However, there may be a possibility that other nuclei are also involved in this pain modulation. Thus, we investigated whether the posterior intralaminar thalamic nuclei (PTIN) are involved in the pain modulation. Methods: To measure the level of pain, the jaw opening reflex (JOR) was used as a pain index. The magnitude of JOR is estimated by averaging the area of 10 successive responses. JOR was evoked by tooth-pulp stimulation with bipolar electrode carrying stimulus with the following parameters: intensity ranging from 420uA to 680ulA, 0.3ms duration of square pulse, and 0.5 Hz. Hapkog($LI_4$) and Taechung ($LR_3$) were the chosen acupoints. The Hapkog point was stimulated ipsilaterally at 5V, 3 Hz, for 15min in total, and the Taechung was stimulated at 2-3 V, 3 Hz, and for a total of 15 or 30 minutes. Different intensities of stimulation were given the PITN; one was given at $300{\mu}A$ and the other was at 500uA. The position stimulated in these nuclei by Paxinos Atlas was AP; from bregma $-4.0{\sim}-4.3mm,\;L; 0.5{\sim}1.8mm,\;D;\;4.8{\sim}6.3mm$. Results: The Hapkog point had a significant analgesic effect (P<0.05). However, the Taechung point had no effect. Both types of stimulation in the PITN did not reveal any analgesic effects. Conclusions: From these results, it was suggested that the posterior intralaminar thalamic nuclei are not involved in the modulation of pain.

• Journal of the Korean GEO-environmental Society
• /
• v.22 no.12
• /
• pp.5-13
• /
• 2021

Expandable steel pipe piles have been developed to ensure stability and reduce construction costs during underground floor remodeling and extension work. Expandable steel pipe piles are more economical and stable than micropiles. Extensible steel pipe pile is a method of improving the performance of steel pipes by expanding steel pipes underground. In this paper, the changes in buckling strength according to the shape of steel pipes in an extended steel pipe pile were identified, a numerical analysis model was developed to determine the expended part effect of bumps due to steel pipe expansion, and the optimal steel pipe expansion was calculated through material tests. The larger the expansion diameter of the steel pipe and the greater the number of expanded part, the greater the buckling strength. Numerical results showed that the number of expanded part has a greater effect on buckling strength than the expansion rate. When the expansion rate is more than 1.2 times, it can be seen that as the number of expanded part increases, the effect of increasing buckling strength increases significantly. It was also noted that the expanded part effect of the bumps occur significantly when the extension angle is less than 45° and the expansion rate is 1.3 times higher. When the steel pipe is failure, the expanded rate is 20 to 32%, averaging 25.4%. Through the material test, it was analyzed that it is desirable to limit the maximum expansion rate for performing steel pipes to 16%.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.12C
• /
• pp.1225-1238
• /
• 2003

We present an efficient algorithm for skew correction of business card images obtained by a PDA (personal digital assistant) camera. The proposed method is composed of four parts: block adaptive binarization (BAB), stripe generation, skew angle calculation, and image rotation. In the BAB, an input image is binarized block by block so as to lessen the effect of irregular illumination and shadow over the input image. In the stripe generation, character string clusters are generated merging adjacent characters and their strings, and then only clusters useful for skew angle calculation are output as stripes. In the skew angle calculation, the direction angles of the stripes are calculated using their central moments and then the skew angle of the input image is determined averaging the direction angles. In the image rotation, the input image is rotated by the skew angle. Experimental results shows that the proposed method yields skew correction rates of about 93% for test images of several types of business cards acquired by a PDA under various surrounding conditions.

• ALGAE
• /
• v.18 no.2
• /
• pp.169-176
• /
• 2003

Algal growth potential test (AGPT) bioassay were conducted to evaluate the stream and reservoir water in the Okchon Stream Watershed during May to September 2002. The water quality of the stream water was clean in the upstream, deteriorating toward the downstream. In particular, SRP and $NH_4$ significantly increased due to treated wastewater. The average AGPT value of the Okchon Stream watershed was 22.4 mg dw ${\cdot}l^{-1}$, with the range of 0- 195.7 mg dw ${\cdot}l^{-1}$. AGPT value was the highest immediately after inflow of treated wastewater, averaging 91.3 mg dw${\cdot}l^{-1}$. AGPT was highly correlated with SRP, $NH_4$ and TIN factors, with P having the greatest effect on the growth of algae. Among N components, $NH_4$ was preferred to $NO_3$ for the growth of algae. Likewise, AGPT was closely linked to meteological and hydrological effects and development of natural phytoplankton. In survey stations, mesotrophic, eutrophic and hypertrophic conditions accounted for 43%, 21% and 36%, respectively. On the other hand, hypertrophic condition focused on the downstream reaches. AGPT was useful in determining not only the limiting nutrients but also the water fertility for the growth of algae. Based on the AGPT results, the management of point sources for water pollution in treated wastewater was important in the protection of aquatic environment in the stream and embayment.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.10
• /
• pp.1432-1442
• /
• 2016

The objective of this study was to determine the effect of palm and/or linseed oil (LSO) supplementation on carcass quality, sensory evaluation and fatty acid profile of beef from crossbred Wagyu beef steers. Twenty four fattening Wagyu crossbred beef steers (50% Wagyu), averaging $640{\pm}18kg$ live weight (LW) and approximately 30 mo old, were stratified and randomly assigned in completely randomized design into 3 treatment groups. All steers were fed approximately 7 kg/d of 14% crude protein concentrate with ad libitum rice straw and had free access to clean water and were individually housed in a free-stall unit. The treatments were i) control concentrate plus 200 g/d of palm oil; ii) control concentrate plus 100 g/d of palm oil and 100 g/d of LSO, iii) control concentrate plus 200 g/d of LSO. This present study demonstrated that supplementation of LSO rich in C18:3n-3 did not influence feed intakes, LW changes, carcass and muscle characteristics, sensory and physical properties. LSO increased C18:3n-3, C22:6n-3, and n-3 polyunsaturated fatty acids (PUFA), however, it decreased C18:1t-11, C18:2n-6, cis-9, trans-11, and trans-10,cis-12 conjugated linoleic acids, n-6 PUFA and n-6:n-3 ratio in Longissimus dorsi and Semimembranosus muscles.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.4
• /
• pp.84-91
• /
• 2005

We measured the pitch of one-dimensional (ID) grating specimens using a metrological atomic force microscope (M-AFM). The ID grating specimens a.e often used as a magnification standard in nano-metrology, such as scanning probe microscopy (SPM) and scanning electron microscopy (SEM). Thus, we need to certify the pitch of grating specimens fur the meter-traceability in nano-metrology. To this end, an M-AFM was setup at KRISS. The M-AFM consists of a commercial AFM head module, a two-axis flexure hinge type nanoscanner with built-in capacitive sensors, and a two-axis heterodyne interferometer to establish the meter-traceability directly. Two kinds of ID grating specimens, each with the nominal pitch of 288 nm and 700 nm, were measured. The uncertainty in pitch measurement was evaluated according to Guide to the Expression of Uncertainty in Measurement. The pitch was calculated from 9 line scan profiles obtained at different positions with 100 ㎛ scan range. The expanded uncertainties (k = 2) in pitch measurement were 0.10 nm and 0.30 nm for the specimens with the nominal pitch of 288 nm and 700 nm. The measured pitch values were compared with those obtained using an optical diffractometer, and agreed within the range of the expanded uncertainty of pitch measurement. We also discussed the effect of averaging in the measurement of mean pitch using M-AFM and main components of uncertainty.