• Parasites, Hosts and Diseases
• /
• v.51 no.5
• /
• pp.531-536
• /
• 2013

Morphological characteristics of Mesocestoides lineatus tetrathyridia collected from Chinese snakes and their adults recovered from experimental animals were studied. The tetrathyridia were detected mainly in the mesentery of 2 snake species, Agkistrodon saxatilis (25%) and Elaphe schrenckii (20%). They were 1.73 by 1.02 mm in average size and had an invaginated scolex with 4 suckers. Adult tapeworms were recovered from 2 hamsters and 1 dog, which were orally infected with 5-10 larvae each. Adults from hamsters were about 32 cm long and those from a dog were about 58 cm long. The scolex was 0.56 mm in average width with 4 suckers of 0.17 by 0.15 mm in average size. Mature proglottids measured 0.29 by 0.91 mm (av.). Ovaries and vitellaria bilobed and located in the posterior portion of proglottids. The cirrus sac was oval-shaped and located median. Testes were follicular, distributed in both lateral fields of proglottids, and 41-52 in number per proglottid. Gravid proglottids were 1.84 by 1.39 mm (av.) with a characteristic paruterine organ. Eggs were 35 by $27{\mu}m$ in average size with a hexacanth embryo. These morphological characteristics of adult worms were identical with those of M. lineatus reported previously. Therefore, it has been confirmed that the tetrathyridia detected in 2 species of Chinese snakes are the metacestodes of M. lineatus, and 2 snake species, A. saxatilis and E. schrenckii, play the role of intermediate hosts.

• Economic and Environmental Geology
• /
• v.18 no.1
• /
• pp.55-63
• /
• 1985

Studies based on field observation and laboratory analysis of the littoral sands of beaches in Jeju Island indicate that the shores exhibit a great variation in both the beach geometry and the composition in terms of geological agents. Most of the beaches around the Island are developed in relatively small patches and discontinuous, as the result of intervening sea cliffs and rocky headlands. The sand quality and the dimensions of the beaches in the Island are relatively poor; for example, these beaches are 220~2,780m in length, 41~313m in width, and $7^{\circ}$ steepness in average foreshore slope. According to the textural parameters analysis, the beach sediments in study portion shows medium grained ($average\;1.42{\phi}$), moderately well sorted ($average\;0.65{\phi}$) and negative skewed ($average\;0.34{\phi}$), which seems to reflecting a high energy marine depositional environment. The heavy and light minerals of te beach sediments are composed of quartz, volcanic fragments, Na-Ca feldspar, olivine, augite as major constituents, along with apatite, biotite and other minor components, which originates from the adjacent geology. The content of CaO-MgO in shell fragments of the littoral sands ranged from 4.69~51.96%, suggesting that the high CaO-MgO content in some of the Island's beaches is attributable to geologic environments conducive to the growth of shell organisms and sediments migration. The provenance of the sediments studied are derived predominantly from adjacent continental shelves and/or terrigenous older river portion, Which sediments were transported mostly by rolling or bottom suspension. The depositional environments of the Jeju beaches can be divided into two types: beaches distributed in the North and the Northeastern parts of the Island are dominated by marine enviroment, whereas beaches in the Southwestern portion are characterized by terrigenous agencies.

• Journal of agriculture & life science
• /
• v.46 no.1
• /
• pp.123-131
• /
• 2012

This study was conducted to estimate correlation structure between Hanwoo steer growth traits - body weights at 6 month, 12 month, 18 month and 24 month of age, average daily gain, carcass traits, body size traits at 18 months of age. Hanwoo progeny test data(body weight, body size traits) collected from 2004 to 2008 on a total of 1,838 steers at Hanwoo Improvement Main Center(NACF) were analyzed. Carcass traits were used to score the 24 months of age and slaughter. Correlation analyses were performed with observed scales of the traits and with residuals considering fixed effects in generalized linear models. The correlated coefficient estimated between live weight at slaughter(24 months of age) and cold carcass weight was high at 0.92. Correlation between beef yield index values and backfat thickness was estimated to be high and negative at -0.92. Hip height and wither height was found to be highly correlated(0.89). Chest width and chest depth also was found to be highly correlated at 0.73. Rump width was highly correlated with chest depth(0.75) and chest width(0.74). Correlation between pelvic width and rump width was estimated to be 0.74. Hipbone width was shown to be highly correlated with chest depth(0.73), chest width(0.70), rump width(0.75), or pelvic width(0.75). Correlation between wither height and carcass weight was 0.48 in observed scale. Chest girth was phenotyically (residual correlation) correlated with carcass weight (0.51), the estimates of which were some higher than than with the other carcass traits. This study will be utilized for Hanwoo Steers genetic evaluation.

• Journal of the Korean GEO-environmental Society
• /
• v.4 no.4
• /
• pp.61-71
• /
• 2003

On the soft soil consisted of silty clay, the compulsion replacement method is useful for revetment and its safety is very much affected by compulsion replacement depth. Usual method calculating the compulsion replacement depth on silty clay is considered the bearing capacity of soft soil with undrained shear strength increase from ground surface and weight of revetment. But according to soil deposit, there are some cases of soft soil with inter sand layer or clayed silt, which affect the compulsion replacement depth. In this paper, the compulsion replacement depth on soft soil with inter sand layer is analyzed by layered weighted average bearing capacity considering influence effect of Perloff et al.(1967) and compared with numerical method(FLAC). In the result, the calculated depth from numerical method is nearest to layered weighted average bearing capacity in case that contact width under revetment is $0.2B_o$(soft soil with inter sand layer), $0.5B_o$(only soft soil) and the effect of contact width under revetment is less than undrained shear strength, thickness and location of inter sand layer. Also the compulsion replacement depth is as much as the inter sand thickness($d_2/B_o$) is thinner, the inter sand layer location($d_1/B_o$) is farther, and undrained shear strength is less.

• Journal of Korean Neurosurgical Society
• /
• v.50 no.3
• /
• pp.166-172
• /
• 2011

Objective : The intralaminar screw (ILS) fixation technique offers an alternative to pedicle screw (PS) and lateral mass screw (LMS) fixation in the C7 spine. Although cadaveric studies have described the anatomy of the pedicles, laminae, and lateral masses at C7, 3-dimensional computed tomography (CT) imaging is the modality of choice for pre-surgical planning. In this study, the goal was to determine the anatomical parameter and optimal screw trajectory for ILS placement at C7, and to compare this information to PS and LMS placement in the C7 spine as determined by CT evaluation. Methods : A total of 120 patients (60 men and 60 women) with an average age of $51.7{\pm}13.6$ years were selected by retrospective review of a trauma registry database over a 2-year period. Patients were included in the study if they were older than 15 years of age, had standardized axial bone-window CT imaging at C7, and had no evidence of spinal trauma. For each lamina and pedicle, width (outer cortical and inner cancellous), maximal screw length, and optimal screw trajectory were measured, and the maximal screw length of the lateral mass were measured using m-view 5.4 software. Statistical analysis was performed using Student's t-test. Results : At C7, the maximal PS length was significantly greater than the ILS and LMS length (PS, $33.9{\pm}3.1$ mm; ILS, $30.8{\pm}3.1$ mm; LMS, $10.6{\pm}1.3$; p<0.01). When the outer cortical and inner cancellous width was compared between the pedicle and lamina, the mean pedicle outer cortical width at C7 was wider than the lamina by an average of 0.6 mm (pedicle, $6.8{\pm}1.2$ mm; lamina, $6.2{\pm}1.2$ mm; p<0.01). At C7, 95.8% of the laminae measured accepted a 4.0-mm screw with a 1.0 mm of clearance, compared with 99.2% of pedicle. Of the laminae measured, 99.2% accepted a 3.5-mm screw with a 1.0 mm clearance, compared with 100% of the pedicle. When the outer cortical and inner cancellous height was compared between pedicle and lamina, the mean lamina outer cortical height at C7 was wider than the pedicle by an average of 9.9 mm (lamina, $18.6{\pm}2.0$ mm; pedicle, $8.7{\pm}1.3$ mm; p<0.01). The ideal screw trajectory at C7 was also measured ($47.8{\pm}4.8^{\circ}$ for ILS and $35.1{\pm}8.1^{\circ}$ for PS). Conclusion : Although pedicle screw fixation is the most ideal instrumentation method for C7 fixation with respect to length and cortical diameter, anatomical aspect of C7 lamina is affordable to place screw. Therefore, the C7 intralaminar screw could be an alternative fixation technique with few anatomic limitations in the cases when C7 pedicle screw fixation is not favorable. However, anatomical variations in the length and width must be considered when placing an intralaminar or pedicle screw at C7.

• Journal of architectural history
• /
• v.18 no.6
• /
• pp.47-64
• /
• 2009

This research was to analyze the inland signal-fire which is the main facility of military protective duty for safety of land in chosun dynasty. The results of this research were described separately as follows. 1. Five types of site plan of signal-fire were observed, which is circle, oval, rectangular, indeterminate form. The majorities were oval type. 2. Plan configuration of brazier which is separated with circle, rectangular type roughly was constructed with circle type generally. The height of brazier was about 3~4.5m. The diameter of brazier was 1.5~2.5m. Building base that protect ground moisture and infilteration of rainfall was found in 5 inland singal-fire, the height of it was about 0.3m~2.5m. 3. The heigh to protective wall remained until present was about 1m, the depth was about average 1.2m. 4. Entrance was mainly stairs or open type and average width was 1.0~1.2m. However the depth was almost observed as 1m, originally, it was estimated it has more depth. 5. The storage of inland signal-fire has rectangular dimension, several types of $1.8{\times}1.2m{\sim}5.7{\times}4.4m$, square(間) of $1{\times}1{\sim}2{\times}1$. The building material was stone and located below or near the brazier.

• Journal of Korean Society of Transportation
• /
• v.12 no.1
• /
• pp.55-73
• /
• 1994

The objective of this research is to evaluate the pedestrian signal time involving green and flashing green times. The minimum pedestrian green indication should give time for pedestrian to start crossing safely, and the flashing green indication should give time to complete the crossing. An average pedestrian crossing speed of 1.1(m/s) was estimated by analyzing the field data which was slower than the 1.2(m/s) currently used. Furthermore, the study proposed that design speed for the flashing green time should be slow speed for considerations pedestrian safety, not the average speed. The 0.78-1.01(m/s) of pedestrian speed was estimated at the elementary school areas that indicated 0.2(m/s) slower than the other areas. The pedestrian starting time (perception/reaction time) and time headway from front to back of herd was estimated to determine minimum pedestrian green time. the pedestrian starting time was estimated to determine minimum pedestrian green time. The pedestrian starting time was ranged 2.52-4.29 seconds. The time interval between the pedestrian rows was found to be 1.25-1.86 seconds, which declines as the pedestrian rows increases, The equation to calculate the pedestrian signal, which declines as the pedestrian rows increases. The equation to calculate the pedestrian signal time is proposed using the pedestrian starting time, the time interval between the pedestrian rows, and pedestrian crossing speed given area types (commercial, business, mixed, and elementary school areas), number of both-directional pedestrians for a cycle, crosswalk length and width.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.4
• /
• pp.277-285
• /
• 2004

In this paper, a 2 DOF haptic yawing joystick for use as the navigation input device in virtual environments is introduced. The haptic yawing joystick has 360° range for yawing motion and ±100° for pitching motion. The device can support weights of up to 26N for χ axis and 10N for axis with 10kHz of sampling rate. The size of the haptic yawing joystick is so small that it can be assembled on armrest of an arm chair and has relatively larger work space than other conventional 2 DOF joysticks. For the haptic yawing joystick, an ellipse navigation algorithm using the user's velocity in the virtual navigation is proposed. The ellipse represents the velocity of the user. According to the velocity of the navigator, the ellipse size is supposed to be changed. Since the path width of navigation environments is limited, the ellipse size is also limited. The ellipse navigation algorithm is tested in 2 dimensional virtual environments. The test results show that the average velocity of the navigation with the algorithm is faster than the average navigation velocity without the algorithm.

• Polymer(Korea)
• /
• v.26 no.3
• /
• pp.360-366
• /
• 2002

The electrospinning of polyacrylonitrile dissolved in N,N-dimethyl formamide (DMF) successfully produced nano-scale fibers. The processing parameters such as charged voltage, velocity of collected roller, and tip-to-collector distance (TCD) , affected the ultimate fiber size. At TCD of 5 cm, the average tiber diameter increased with increasing charged voltage because of the more aggregation between fibers due to the remaining DMF solvent on the fiber surface. But, at TCD of 9 cm, the average fiber diameter decreased as the charged voltage was increased because of complete evaporation of DMF. Also, the fiber diameter decreased with increasing the velocity of collected roller. Cross direction width (CWD) of nonwoven mat increased with decreasing the charged voltage and with increasing TCD.

• Journal of Ecology and Environment
• /
• v.44 no.1
• /
• pp.41-44
• /
• 2020

The Chinese many-toothed snake (Sibynophis chinensis) is an endangered species in South Korea. To determine its reproductive activity, here we captured a gravid S. chinensis from Mulyeongari Oreum Wetland Conservation Area, Jeju Island, on May 27, 2018, and reared it at Animal Taxonomy and Morphology Laboratory, Jeju National University, South Korea. The snake oviposited a clutch of six eggs between June 12 and 20, 2018, with an average size of 24.86 ± 1.36 mm in length and 9.86 ± 0.49 mm in width, which were artificially incubated at a constant temperature of 27 ℃. After incubating for 34-41 days, five of these six eggs successfully hatched. Average snoutvent length (SVL), tail length (TL), and body weight (BW) of hatchlings were 136.5 ± 5.17 mm, 47.76 ± 2.80 mm, and 1.66 ± 0.12 g, respectively. This study observed the reproductive activity of S. chinensis and characterized its eggs and hatchlings for the first time, providing valuable information for the long-term conservation plan of S. chinensis in South Korea.