• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.491-491
• /
• 2013

A novel plasma system has been developed for 3-dimensional modification of the carbon nano-powders. Improvement of dispersion of these nano materials are studied by plasma discharge, not using chemical modification. The plasma process is considered to great advantages over wet chemical process due to environmental, economic viewpoint, and uniformity over the treated volume. The uniform dispersion is a critical factor for these material's nano composite applications. Using this plasma system, graphene, carbon black, and CNT was treated and functionalized. Several key discharge conditions such as Ar/H2/O2 or Ar/H2/NH3 gas ratio, treatment time, power, feeder's vibration frequency are investigated. Hydrophobic of graphene has turned some more into hydrophilic by reaction test with water, electrophoresis, surface contact angle test, and turbidity analysis. The oxygen content ratio in the plasma treated CNT has increased about 3.7 times than the untreatedone. In the case of graphene and carbon black, the oxygen- and nitrogen- content has been enhanced average 10%. O-H (N-H) peak, C-O (C-N) peak, and C=O (C=N) peak data have been detected by FTIR measurement and intensified compared to before-plasma treatment due to O2 or NH3 content.

• Steel and Composite Structures
• /
• v.19 no.5
• /
• pp.1167-1184
• /
• 2015

Despite considerable life casualty and financial loss resulting from past earthquakes, many existing steel buildings are still seismically vulnerable as they have no lateral resistance or at least need some sort of retrofitting. Passive control methods with decreasing seismic demand and increasing ductility reduce rate of vulnerability of structures against earthquakes. One of the most effective and practical passive control methods is to use a shear panel system working as a ductile fuse in the structure. The shear Panel System, SPS, is located vertically between apex of two chevron braces and the flange of the floor beam. Seismic energy is highly dissipated through shear yielding of shear panel web while other elements of the structure remain almost elastic. In this paper, lateral behavior and related benefits of this system with narrow-flange link beams is experimentally investigated in chevron braced simple steel frames. For this purpose, five specimens with IPE (narrow-flange I section) shear panels were examined. All of the specimens showed high ductility and dissipated almost all input energy imposed to the structure. For example, maximum SPS shear distortion of 0.128-0.156 rad, overall ductility of 5.3-7.2, response modification factor of 7.1-11.2, and finally maximum equivalent viscous damping ratio of 35.5-40.2% in the last loading cycle corresponding to an average damping ratio of 26.7-30.6% were obtained. It was also shown that the beam, columns and braces remained elastic as expected. Considering this fact, by just changing the probably damaged shear panel pieces after earthquake, the structure can still be continuously used as another benefit of this proposed retrofitting system without the need to change the floor beam.

• Computational Structural Engineering
• /
• v.9 no.4
• /
• pp.229-237
• /
• 1996

In some current procedures, ground motions from different sources have been scaled by their peak ground accelerations and combined to obtain smoothed response spectra for specific regions. As consideration of the inelastic deformation capacity of structure, inelastic deformations are permitted under seismic ground excitation in all codes. In the ATC(Applied Technology Council) and UBC(Uniform Building Code), the inelastic design spectrum is obtained by reducing the elastic design spectrum by a factor that is independent of structural period. In this study, the average of nonlinear response spectra calculated from a sample of 20 records for each event are constructed to obtain the smoothed response spectra. These response spectra are used to examine the effects of structural strength factors such as the yield strength ratio and damping value. Through the regression analysis of nonlinear response of system for a given damping value and yield strength ratio, the required yield strength for seismic design can be estimated for a certain earthquake event. And a response modification coefficient depending on the natural period for current seismic design specifications are proposed.

• Korean Journal of Community Nutrition
• /
• v.8 no.4
• /
• pp.477-484
• /
• 2003

This study was conducted to investigate nutrient intakes and obesity-related factors of obese children by interviewing the subjects aged from 11 to 13 in Daegu. The collected data were consisted of items on general characteristics, dietary behavior, nutrition knowledge and daily nutrient intakes of subjects. The subjects were classified into obese and non-obese control groups according to their relative weights. Frequency of skipping breakfast and eating rate of obese group were significantly higher than those of control group. There was no significant difference between obese and control group in the nutrition knowledge score. Except vitamins $B_1$, $B_2$ and iron, the average daily intakes of other nutrients in obese were greater than control group. The most contributing factor to BMI turned out to be cholesterol intake. After the nutrition education targeting obese children, their nutrition knowledge scores improved, but the dietary behavior score was not significantly changed. Therefore, childhood obesity may be prevented by continuous education programs including the behavior modification of obese children. (Korean J Community Nutrition 8(4) : 477-484, 2003)

• Journal of the Korean Society of Hazard Mitigation
• /
• v.6 no.3 s.22
• /
• pp.9-16
• /
• 2006

In structural health monitoring, the safety of structural members are assessed by the level of stress measured by various strain sensors based on different sensing mechanisms. Since most existing strain sensors used for health monitoring system can cover a relatively small range of structural members, it is very difficult to measure the maximum value of the member subjected to varying amount and types of loads with those point sensors. The reliability of assessed safety of a member may be improved by increasing the number of sensors. It may not be also realistic to increase the number of sensors to overcome these drawbacks. In this paper, a stress measuring method for beam-column members is developed by estimating the maximum stress based on the average strains obtained from long gauge sensor. The average strain from long gage fiber optic sensor is transformed into the maximum strain by multiplication of the modification factor derived in this research.

• Therapeutic Science for Rehabilitation
• /
• v.10 no.2
• /
• pp.37-51
• /
• 2021

Objective : The purpose of this study was to analyze non-invasive treatments and drooling assessment methods in children with cerebral palsy and developmental disabilities, who drool. Methods : This study searched two hundred papers published in 2005-2019. Forty-four papers were selected based on their abstract and title, and ten papers were finally selected following a secondary search. Results : The PEDro Scale of the selected papers was high with an average of seven points. As a result of analyzing the overall trends, the study participants were primarily patients with cerebral palsy, and recently, the therapeutic intervention of oral sensory exercise was more actively studied than behavioral modification. Studies of behavioral modification and oral sensory exercise intervention methods were found to have differences in participant age and, cognitive level, number of participants, research design, treatment time, and duration. Studies to confirming the frequency and severity of the drooling measurement method were found to be the main factor. Conclusion : This study analyzed typical behavioral modification and oral sensory exercise interventions as examples of non-invasive therapeutic interventions for children with cerebral palsy and developmental disabilities and provided information to help select appropriate therapeutic intervention methods when planning non-invasive therapy using behavioral modification and oral sensory exercise therapy.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.11
• /
• pp.599-609
• /
• 2007

Due to the restrictions of Flash memory such as overwrite limitation and write/erase operational unit differences, block cleaning is required in Flash memory based file systems and known as a key factor on the performance of file systems. In this paper, we identify three parameters, namely utilization, invalidity and uniformity, and analyze how the parameters affect the cost of block cleaning. The analysis show that as uniformity degrades, the cost of block cleaning increases drastically. To overcome this problem, we design a new modification-aware(MODA) page allocation scheme that strives to keep uniformity high by separating frequently-updating data from infrequently-updating data. Real implementation experiments conducted on an embedded system show that the MODA scheme can actually enhance uniformity of Flash memory, which consequently leads to reduce the cost of block cleaning with an average of 123%, compared to the traditional sequential allocation scheme that is used in YAFFS.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.8
• /
• pp.63-72
• /
• 1995

Closed-die forging of spur gears with hollow cylindrical billet has been analysed by using the upper-bound method. A kinematically admissible velocity field has been developed, wherein, an involute curve has been introduced to represent the forging die profile. In the analysis, the deformation region has been divided into nine zones. A constant frictional stress has been assumed on the contacting surfaces. Utilizing the formulated velocity field, numerical calculations have been carried out to investigate the effects of various parameters, such as module, number of teeth and friction factor, on the forging of spur gears. Hardness and accuracy of forged gears are measured. The following results have been obtained: (1) It is verified that an axisymmetric deformation zone exists between root circle and center of gear through forged gears. (2) The average relative forging pressure is predominantly dependent on the number of teeth and increases near the final filling stage as the addendum modification coefficient increases. (3) Close agreement was found between the predicted values of forging load and those obtained from experimental results.

• Clinics in Shoulder and Elbow
• /
• v.3 no.2
• /
• pp.61-67
• /
• 2000

Purpose: Most proximal humeral fractures are minimally displaced and can be treated satisfactorily with a conservative method. But in many comminuted fractures, hemiarthroplasty is usually done as a primary treatment. The authors evaluated how much functional improvement was achieved after hemiarthroplasty and which factors influence on the final functional results. Materials and Methods: Eleven hemiarthroplasties were performed for three- and four-part fractures(including fracture-dislocation) between April 1992 and June 1999. There were eight women and three men, and the mean age was 65 years. According to Neer classification, six was three-part fracture and five was four-part fracture. Six patients were injured on their right shoulder and five on the left shoulder. Among the five four-part fractures, three had axillary nerve injury and among the six three-part fractures, only one patient had axillary nerve injury. The average follow-up period was 2.4 years(1 year-7 years) after operation. The functional results were evaluated with the UCLA scoring system(Modification for hemiarthroplasty). In addition to the overall results, we compared the results according to the classification of the fracture, the cause of injury, and whether the axillary nerve was injured. Results: At the last follow-up, average total UCLA score was 18.2. The mean score for pain was 7.0, mean muscle power and motion score was 5.5 and 5.7 respectively. The pain relief was more satisfactory than any other functional results. The average score for three-part fractures was 22, and the average for four-part fractures was 13.6. The average score for the patients fractured by vehicle accidents was 15.3, and 19.3 for the patients fractured by slip-down injury. In patients without axillary nerve injury, the average score was 20, and with axillary nerve injury, the score was 15. Conclusion: Shoulder hemiarthroplasty, for the treatment of proximal humeral fractures, cannot restore the shoulder function to normal, but can achieve the functional result to some degree, especially for the activity of daily living. And as for pain, we think that it is relatively effective measure. And we think that the severer the comminution, the more the chance of axillary nerve injury, and the poorer the functional results. In conclusion, the severity of initial injury seems to be the major prognostic factor.

• Journal of Korean Academy of Nursing
• /
• v.26 no.2
• /
• pp.359-371
• /
• 1996

This study has been done for the purpose of testing the effect of health education on the performance of health promoting behavior in college students, and identifying the factors affecting health promoting behaviors. A Nonequivalent control group posttest research design was used. Two hundred thirty college students at K College in T city were studied. Of them, 114 who attended a systematic health education session for three hours a week during one semester were the experimental group. And 116 college students who were chosen of matched sampling of grade, class and sex were the control group. This study was conducted from March 1 to July 2, 1995. The instruments used for this study included a survey of general characteristics, perceived health status, self-esteem, health promoting behavior and health locus of control. Analysis of data was done by use of mean, 1-test, Pearson correlation coefficient and multiple regression. The results of this study are summarized as follows : 1) The average item score for the health promoting behavior was low at 2.52. In the sub-categories, the highest degree of performance was ‘harmonious relationships’, following ‘sanitary life’, ‘self-esteem’, ‘rest and sleep’, and ‘emotional support’ and the lowest degree was ‘professional health management’. 2) Hypothesis 1 that the college students who get health education will have a higher degree of health promoting behavior than the college students who do not get health education was accepted. There was a statistically significant difference between the average of the experimentalgroup, 2.60, and the average of the control group, 2.45.（t＝11.30, p＝0.0009）. 3) Hypothesis 2 that the college students who get health education will have a higher score of perceived health status than college students who do not get the health education was rejected. （t＝1.13, p＝0.289） 4) Performance of health promoting behavior was positively correlated with self-esteem and grade and negatively correlated with perceived health status. 5) The most important factor affecting performance of health promoting behavior was self-esteem. The following suggestions are made based on the above results : 1) Replication of the research is needed to confirm effects of health education. 2) More effective health education programs need to be developed through by modification of teaching methods and content analysis of health education. 3) Other factors affecting health promoting behavior should be identified. 4) Nursing colleges or departments of nursing should make an effort to develop and carry out various health education programs for the health promotion of all college students.