• Korean Journal of Materials Research
• /
• 제31권12호
• /
• pp.657-664
• /
• 2021

To build a highly active photocatalytic system with high efficiency and low cast of TiO₂, we report a facile hydrothermal technique to synthesize Ag₂Se-nanoparticle-modified TiO₂ composites. The physical characteristics of these samples are analyzed by X-ray diffraction, scanning electron microscopy with energy dispersive X-ray analysis, transmission electron microscopy and BET analysis. The XRD and TEM results show us that TiO₂ is coupled with small sized Ag₂Se nanoplate, which has an average grain size of about 30 nm in diameter. The agglomeration of Ag₂Se nanoparticles is improved by the hydrothermal process, with dispersion improvement of the Ag₂Se@TiO₂ nanocomposite. Texbrite BA-L is selected as a simulated dye to study the photodegradation behavior of as-prepared samples under visible light radiation. A significant enhancement of about two times the photodegradation rate is observed for the Ag₂Se@TiO₂ nanocomposite compared with the control sample P25 and as-prepared TiO₂. Long-term stability of Ag₂Se@TiO₂ is observed via ten iterations of recycling experiments under visible light irradiation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• 제35권5호
• /
• pp.516-521
• /
• 2022

We investigated the microstructure, crystal structure, dielectric, and elecromechanical strain properties of lead-free BaTiO₃ (BT)-modified (Bi_1/2Na_1/2)TiO₃-SrTiO₃ (BNT-ST) piezoelectric ceramics. Samples were prepared by a conventional ceramic processing route. Temperature dependent dielectric properties confirmed that a phase transition from a nonergodic relaxor to an ergodic relaxor was induced when the BT concentration reached 1.5 mol%, interestingly, where the average grain size reached a maximum value of 4.5 ㎛. At the same time, enhanced electromechanical strain (S_max/E_max = 600 pm/V) was obtained. It is suggested that the induced ferroelectric-relaxor phase transition by the BT modification is responsible for the enhancement of electromechanical strain in 1.5 mol% BT-modified BNT-ST ceramics.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• 제54권6호
• /
• pp.1030-1035
• /
• 2021

Diving fishermen are demanding permission to use an inspirator that can efficiently catch Manila clam; however, coastal fishermenargue that the use of inspirator devastates the seabed and depletes fishery resources. Therefore, the aim of this study was to evaluate the fishing power of diving gears and its effect on coastal fishing grounds. The average time taken to fish in the seabed (4 m²) with a rake, water gun, and an inspirator was 11.17 min, 13.33 min and 7.81 min, respectivelyThe values of catch per unit time with a rake, water gun, and an inspirator were 3.35 kg/min, 2.26 kg/min, and 3.83 kg/min, respectively. Suspended sediments were observed the most in the water gun fishing area, and were observed more in April when fishing was not carried out than in February when fishing was carried out. However, the difference in the amount of sediment deposited in the fishing area using the three-fishing gears was very small. For an accurate analysis of the impact of the fishing gears on the seabed, supplementary tests such as grain size analysis and changes in benthic organisms need to be conducted.

• Korean Journal of Materials Research
• /
• 제32권11호
• /
• pp.489-495
• /
• 2022

This research investigated how adding Sb (0.75, 1.0, 2.0 and 5.0 wt%) to as-extruded aluminum alloys affected their microstructure, mechanical properties, electric and thermal conductivity. The addition of Sb resulted in the formation of AlSb intermetallic compounds. It was observed that intermetallic compounds in the alloys were distributed homogenously in the Al matrix. As the content of Sb increased, the area fraction of intermetallic compounds increased. It can be clearly seen that the intermetallic compounds were crushed into fine particles and homogenously arrayed during the extrusion process. As the Sb content increased, the average grain size decreased remarkably from 282.6 ㎛ (0.75 wt%) to 109.2 ㎛ (5.0 wt%) due to dynamic recrystallization by the dispersed intermetallic compounds in the aluminum matrix during the hot extrusion. As the Sb content increased from 0.75 to 2.0 wt%, the electrical conductivity decreased from 61.0 to 59.8 % of the International Annealed Copper Standard. Also, as the Sb content increased from 0.75 to 2.0 wt%, the ultimate tensile strength did not significantly change, from 67.3 to 67.8 MPa.

• Journal of Powder Materials
• /
• 제30권6호
• /
• pp.484-492
• /
• 2023

In this study, Ni-Y₂O₃ powder was prepared by alloying recomposition oxidation sintering (AROS), solution combustion synthesis (SCS), and conventional mechanical alloying (MA). The microstructure and mechanical properties of the alloys were investigated by spark plasma sintering (SPS). Among the Ni-Y₂O₃ powders synthesized by the three methods, the AROS powder had approximately 5 nm of Y₂O₃ crystals uniformly distributed within the Ni particles, whereas the SCS powder contained a mixture of Ni and Y₂O₃ nanoparticles, and the MA powder formed small Y₂O₃ crystals on the surface of large Ni particles by milling the mixture of Ni and Y₂O₃. The average grain size of Y₂O₃ in the sintered alloys was approximately 15 nm, with the AROS sinter having the smallest, followed by the SCS sinter at 18 nm, and the MA sinter at 22 nm. The yield strength (YS) of the SCS- and MA-sintered alloys were 1511 and 1688 MPa, respectively, which are lower than the YS value of 1697 MPa for the AROS-sintered alloys. The AROS alloy exhibited improved strength compared to the alloys fabricated by SCS and conventional MA methods, primarily because of the increased strengthening from the finer Y₂O₃ particles and Ni grains.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 1993년도 추계학술대회 논문집
• /
• pp.17-20
• /
• 1993

In this paper, the (1-x)($Sr_{0.50}$$Pb_{0.25}$$Ba_{0.25}$)$TiO_3$-x $Bi_2$$Ti_3$$O_{9}$(x=0,4,6,8[mol.%]) ceramics with paraelectric properties were, fabricated by mixed oxide method. The dielectric and structural properties of ceramics were studied with sintering temperature and addition of $Bi_2Ti_3O_{9}$, and the application for the high - voltage capacitor was investigated. In the specimens with sintering at 1350[$^{\circ}C$], sintered density was showed the highest value of 5.745[g/cm$^3$]. Increasing of sintering temperature, average grain size was increased. The specimen. ($Sr_{0.50}$$Pb_{0.25}$$Ba_{0.25}$)$TiO_3$sintered at 1350[$^{\circ}C$] showed good dielectric properties and breakdown voltage was showed the highest value of 200[kV]. Temperature coefficient of capacitance was stabilized in specimens added $Bi_2Ti_3O_{9}$ Sintered density. dielectric properties and breakdown voltage ware decreased with increasing the contents of $Bi_2Ti_3O_{9}$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• 제54권2호
• /
• pp.203-209
• /
• 2009

Yield monitoring is one of a precision agriculture technology that is used most widely. It is spatial variability analysis of yield information that should be attained with yield monitoring system development. This experiment was conducted to evaluate spatial variability of yield and grain moisture content in rice paddy field, and their relationships to rice productivity. It is necessary to minimize sampling interval for accurate yield map making or to control cutting width of rice combine. Considering small rice plots such as $0.2{\sim}0.4$ ha, optimum size of sampling plot was below 15 m more than 5 m in with and length. In variable rate treatment field, average yield was similar, but yield variation was reduced than conventional field. Gap of yield by another plot in same field was bigger than half of average yield than yield variation was significantly big. Therefore yield measuring flow sensor must be able to measure at least 300 kg/10a more than 1000 kg/10a. Variation of moisture content in same field was not big and spatial dependance did not appear greatly. But, variation between different field is appeared difference according to weather circumstance before harvesting. Change of spatial dependence of yield was not big, because of field variation of moisture content is not big.

• Economic and Environmental Geology
• /
• 제45권5호
• /
• pp.487-502
• /
• 2012

This paper is focused on mineral compositions, microstructures and distributional characters of remained grains in the fault rocks collected from a fault developed in Yongdang-ri, Yangbuk-myeon, Gyeongju City, Korea, using X-ray diffraction (XRD), optical microscope, laser grain size analysis and fractal dimension analysis methods. The exposed fault core zone is about 1.5 meter thick. On the average, the breccia zone is 1.2 meter and the gouge zone is 20cm thick, respectively. XRD results show that the breccia zone consists predominantly of rock-forming minerals including quartz and feldspar, but the gouge zone consists of abundant clay minerals such as chlorite, illite and kaolinite. Mineral vein, pyrite and altered minerals commonly observed in the fault rock support evidence of fault activity associated with hydrothermal alteration. Fractal dimensions based on box counting, image analysis and laser particle analysis suggest that mineral grains in the fault rock underwent fracturing process as well as abrasion that gave rise to diminution of grains during the fault activity. Fractal dimensions(D-values) calculated by three methods gradually increase from the breccia zone to the gouge zone which has commonly high D-values. There are no noticeable changes in D-values in the gouge zone with trend being constant. It means that the bulk-crushing process of mineral grains in the breccia zone was predominant, whereas abrasion of mineral grains in the gouge zone took place by continuous fault activity. It means that the bulk-crushing process of mineral grains in the breccia zone was predominant, whereas abrasion of mineral grains in the gouge zone took place by continuous fault activity. Mineral compositions in the fault zone and peculiar trends in grain distribution indicate that multiple fault activity had a considerable influence on the evolution of fault zones, together with hydrothermal alteration. Meanwhile, fractal dimension values(D) in the fault rock should be used with caution because there is possibility that different values are unexpectedly obtained depending on the measurement methods available even in the same sample.

• Journal of the Korean Society of Marine Environment & Safety
• /
• 제25권6호
• /
• pp.666-677
• /
• 2019

In order to understand the distribution of organic matter and heavy metal concentrations in the surface sediments of fishery resources protection areas (FRPAs), we measured the grain size, ignition loss (IL), chemical oxygen demand (COD), acid volatile sulfide (AVS), and concentrations of heavy metals (As, Cd, Cr, Cu, Fe, Hg, Pb, and Zn) in the surface sediments collected at 54 stations of 5 FRPAs (Gamak Bay, Yeoja Bay, Deukryang Bay, Wando coast, and Youngkwang coast) in the southwestern coast of Korea in February 2017. The surface sediments consisted of fine sediment such as mud, with 2.9~8.8Ø (7.4±0.1Ø) of mean grain size. The average concentrations of IL, COD, and AVS in the sediments were 4.63±0.96 %, 13.0±3.1 mgO₂/g·dry, and 0.092±0.124 mgS/g·dry, respectively, and were lower for sediments from the Youngkwang coast than those from other FRPAs. The average concentrations of heavy metals in the sediment were 7.5±0.9 mg/kg for As, 0.04±0.02 mg/kg for Cd, 70.2±9.7 mg/kg for Cr, 15.3±2.8 mg/kg for Cu, 3.3±0.5 % for Fe, 0.014±0.003 mg/kg for Hg, 25.0±6.0 mg/kg for Pb, and 99±14 mg/kg for Zn, respectively, and were relatively higher for sediments in the inner bays than those from the outer bays and coasts. Based on the assessment of sediment samples using the sediment quality guidelines (SQGs), the pollutant load index (PLI), and the ecological risk index (ERI), the surface sediments of FRPAs in the southwestern coast of Korea do not appear to be polluted by heavy metals, suggesting that the heavy metal concentrations in the sediments would not adversely impact aquatic and benthic organisms.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• 제10권1호
• /
• pp.92-99
• /
• 2005

To discriminate the provenance of shelf sediments in the East China Sea, textural and elemental compositions along with strontium isotopic ratio ($^{87}Sr/^{86}Sr$) were analyzed and compared with the sediments originated from Chinese rivers. The sediments in the study area are composed of fine-grained mud with a mean grain size of $47\;{\phi}$ and their $CaCO_3$, contents range from 3.9 to 11.5% (average 7.6%). In the study area, the content of most metallic elements are strongly constrained by sediment grain size (quartz dilution effect) and that of biogenic material and, thereby, their spatial distribution seems not enough for understanding sediment provenance in the study area. The muddy sediments of the Yangtze river have much lower $^{87}Sr/^{86}Sr$ ratio ($0.71197{\sim}0.71720$) than the Yellow Sea shelf muddy sediments which are supposed to be originated from the Huanghe river ($0.72126{\sim}0.72498$), suggesting the distribution pattern of $^{87}Sr/^{86}Sr$ ratios as a new tracer to discriminate the provenance of shelf sediments in the study area. Different source rock compositions and weathering processes between both drainage basins may account for the differences in $^{87}Sr/^{86}Sr$ ratio. Although the ratios show wide range, from 0.71445 to 0.72184 with an average 0.71747 in the study area, they are close to the values of the Yangtze river sediments, suggesting that the sediments were mainly originated from the Yangtze river. The previous studies on the dispersal pattern of modern sediments and the physico-chemical properties of seawater in the Yellow and East China seas support the possibility that the fine-grained Yangtze river sediments can reach to the East China Sea shelf as well as to the southeastern Yellow Sea.