• Journal of Preventive Medicine and Public Health
• /
• 제47권1호
• /
• pp.18-26
• /
• 2014

The purpose of this study was to establish food ingestion factors needed to assess exposure to contaminants through food ingestion. The study reclassified the raw data of the Korean National Health and Nutrition Examination Survey in 2001 into 12 subcategories including grain products, meat products, fish and shellfish, and vegetables for international comparability of exposure evaluation. The criteria for food intake calculation were unified according to the characteristics of food groups, and recommended values for food ingestion factors were calculated through moisture correction and recategorization of cooked, processed, and mixed foods for each group. The average intake rate for grain and grain products was 6.25 g/kg-d per capita and the men's intake rate was approximately 8% higher than that of the women. The average intake rate of meat and meat products was 1.62 g/kg-d per capita and the men's intake rate was 30% higher than that of the women, on average. The average intake rate of fish and shellfish was 1.53 g/kg-d per capita, and the age groups of 1 to 2 and 3 to 6 recorded higher capita intake rates than other age groups, 2.62 g/kg-d and 2.25 g/kg-d, respectively. The average intake rate of vegetables was 6.47 g/kg-d per capita, with the age group of 1 to 2 recording the highest per capita intake rate of 9.79 g/kg-d and that of 13 to 19 recording the lowest mean. The study also offers recommended values for food ingestion factors of other food groups by gender, age, and region. The food ingestion exposure factors will need future updates in consideration of ongoing changes in food consumption behavior.

• 한국세라믹학회지
• /
• 제47권1호
• /
• pp.71-74
• /
• 2010

We have investigated protonic conduction in highly dense (>98%) polycrystalline Y-doepd $BaZrO_3$ (BYZ) ceramic with an average grain size of ~85 nm. It is observed that the protonic conductivity across the grain boundaries in this nano-crystallilne BYZ (n-BYZ) is significantly higher than the microcrystalline counterpart. Such a remarkable enhancement in grain boundary conductivity results in high overall conductivity that may allow this chemically stable protonic conductor to serve as a solid electrolyte for low-temperature solid oxide fuel cell applications.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.405-412
• /
• 2000

A natural air in-bin grain dryer with a grain circulator was developed for on farm use. Natural air drying test for rough rice was carried out to evaluate drying rate, uniformity of moisture content distribution in grain bed and energy consumption. It took 10 days to dry 8 ton of paddy rice from 21.9%(w.b) to 16.7%(w.b) moisture contents using the prototype dryer. The average drying rate was 0.52%/day. The uniformity of moisture content after drying was superior to the conventional natural air dryer where is grains were not circulated during drying periods. The dryer performance evaluation index was 738.3KJ/(kg.water), which was more effective than that of grain circulation t)pe hot air dryer(3,500-5,000 KJ/kg.water).

• 소성∙가공
• /
• 제21권5호
• /
• pp.324-329
• /
• 2012

Mg-(9-x)Sn-xAl-1Zn (x=1, 2, 3 and 4 wt.%) alloys were subjected to indirect extrusion, and the microstructure and mechanical properties of the as-extruded Mg-Sn-Al-Zn (TAZ) alloys were investigated. The TAZ 811 alloy exhibited a finer grain structure than the TAZ 541 alloy due to a larger number of Mg2Sn particles, which pinned the grain boundaries and prevented growth of recrystallized grains. The TAZ alloys showed an unusual yield asymmetry behavior. The tension-compression yield asymmetry increased with decreasing average grain size. The TAZ 811 alloy with a small grain size exhibited a larger yield asymmetry than that of the TAZ 541 alloy having a relatively large grain size, which is mainly attributed to the low Al content and large number of second phase particles in the TAZ 811 alloy.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2001년도 추계학술발표대회 개요집
• /
• pp.220-222
• /
• 2001

The average grain size, the grain-size distribution, the morphology and the microstructure are fundamental characteristics of a spraying powder. Now that the significance of the grain size for the pattern of properties of the powder has been recognised, greater consideration is also being given to it in standards and regulations. However, unfortunately, the processes according to which the grain size and the grain-size distribution must be determined are specified in the rarest of cases. The contribution therefore dealt with the comparison of different particle-size measuring techniques, such as diffraction spectroscopy, sedimentation, sieving and microscopic measurement. The comparability of the measured results was investigated on twelve plasma spraying powders with different compositions, nominal sizes and morphologies.

• 한국농공학회논문집
• /
• 제58권1호
• /
• pp.11-17
• /
• 2016

Dredging and land reclamation works has actively carried out for the efficient use of land and secure of agricultural and industrial site. During the reclamation, a portion of landfills are lost from the desired location due to a variety of causes. However, these causes has been rarely studied, and water flow velocity has a great influence on the movement of landfills. For the economical and efficient reclamation, it is important to predict the movement of landfills in water. In this paper, an experimental study was carried out to investigate the deposition distance according to the flow velocity and soil grain size. We have made a large open-channel apparatus that can reproduce a laminar flow, and the deposition test was carried out on the four grain size (0.638, 1.425, 3.375, 7.125 mm) and four flow velocity (0.1, 0.3, 0.5, 0.67 m/s) with high definition video recording. As a results, average deposition distance increased with the flow velocity, and its relationship is shown linearly. For the grain size, the average deposition distance were drastically increased as the grain size becomes smaller.

• 한국재료학회지
• /
• 제12권9호
• /
• pp.701-705
• /
• 2002

High temperature tensile test has been performed at $450^{\circ}C$ at different strain rate with various grain size due to different reduction rate of Al-4wt%Mg-0.4wt%Sc alloy which is known to be one of useful superplastic alloys. The grain size of Al-4wt%Mg-0.4wt%Sc alloy is $67~100\mu\textrm{m}$ which is courser than that of the alloy which is commonly used as the superplastic material. The total elongation of the Al-4wt%Mg-0.4wt%Sc alloy is strongly dependent on the average grain size, and is a linear function of the inverse average grain size for the present alloy.

• 한국작물학회지
• /
• 제33권4호
• /
• pp.386-391
• /
• 1988

보리의 교배육종에서 교배조합의 양부를 초기세대에 검정할 수 있는가를 Sakai의 이론에 따라 구명하기 위하여 보리의 수량형질인 추수, 입수, 수중, 개체별 입중에 대해서 5개 교배조합을 가지고 조사를 실시한 결과를 요약하면 다음과 같다. 1. 입수의 경우 3개 조합에서 그리고 수중의 경우는 1개 조합에서 상가적유전분산이 부의 방향으로 계산되었고 교배조합의 우량도를 계산할 수 없었으나 나머지 조합과 형질에서는 무난히 계산이 가능하였다. 2. 수수에 대한, 교배조합의 우량도 Y는 SB 76588$\times$SB72648 조합이 제1위였다. 또 이 조합은 F$_4$ 집단의 상위 5 % 및 10%내 식물의 평균순위에서도 2위를 하여 수수에 대해서는 이 조합이 5개 조합중 가장 좋은 조합으로 인정되었다. 3. 수당입수에 있어서는 3개 조합에서 Y값의 추정이 불가능하였으나 나머지 2조합을 가지고 보았을 때 F$_4$ 집단의 순위가 높고 Y값도 높은 밀양 006$\times$수원20003 조합이 우량조합인 것으로 보이었다. 4. 수종에서는 Y계산이 불가했던 1개 조합을 제외한 나머지 조합에서 Y에 의한 순위와 F$_4$에의 한 순위와 대체로 일치하였고 밀양006$\times$수원 20003 조합이 우수조합으로 나타났다. 5. 개체별 입중에서도 Y값에 의한 순위와 F$_4$에 의한 순위가 대체로 일치하였고 SB76588$\times$SB72648 조합이 가장 우수한 조합인 것으로 나타났다.

• 열처리공학회지
• /
• 제17권1호
• /
• pp.17-22
• /
• 2004

In the present study, newly developed spark plasma sintering(SPS) technique was introduced to refine the grain size of ${\gamma}$-based TiAl intermetallic compounds. Ti-46Al-1.5Mo and Ti-46Al-1.5Mo-0.2C(at%) prealloyed powders were produced by mechanical milling(MM) in high-energy attritor. The mechanically milled powders were characterized by XRD and SEM for the microstructural evolution as a function of milling time. And then, the MMed powders were sintered by both spark plasma sintering and hot pressing in vacuum (HP). After the sintering process, MM-SPSed specimens were heat-treated in a vacuum furnace (SPS-VHT) and in the SPS equipment(MM-SPS) for microstructural control. It was found from microstrutural observation that the microstructure consisting of equiaxed ${\gamma}$-TiAl with a few hundred nanometer in average size and ${\alpha}_2-Ti_3Al$ particles were formed after both sintering processes. It was also revealed from hardness test and three-point bending test that the effect of grain refinement on the hardness and bending strength is much higher than that of carbon addition. The fully lamellar microstructures, which is less than $80{\mu}m$ in average grain size was obtained by SPS-VHT process, and the fully lamellar microstructure which is less than $100{\mu}m$ in average grain size was obtained by MM-SPS for a relatively shorter heat-treatment time.

• 방사선산업학회지
• /
• 제8권3호
• /
• pp.141-146
• /
• 2014

Nickel (Ni) electroplating was implemented by using a metal Ni powder in order to establish a $^{63}Ni$ plating condition on the PN junction semiconductor needed for production of beta-voltaic battery. PN junction semiconductors with a Ni seed layer of 500 and $1000{\AA}$ were coated with Ni at current density from 10 to $50mA\;cm^{-2}$. The surface roughness and average grain size of Ni deposits were investigated by XRD and SEM techniques. The roughness of Ni deposit was increased as the current density was increased, and decreased as the thickness of Ni seed layer was increased. The results showed that the optimum surface shape was obtained at a current density of $10mA\;cm^{-2}$ in seed layer with thickness of $500{\AA}$, $20mA\;cm^{-2}$ of $1000{\AA}$. Also, pure Ni deposit was well coated on a PN junction semiconductor without any oxide forms. Using the line width of (111) in XRD peak, the average grain size of the Ni thick firm was measured. The results showed that the average grain size was increased as the thickness of seed layer was increased.