• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.151-151
• /
• 2017

In Asia, rice production has some difficulties with reduction of farm household population and increase of elderly population. As a result, it has resulted in inefficiency and we needs to reduce labor force and improve labor productivity. Direct-seeding in rice could reduce labor and production costs, the area of direct seeding is increasing in japonica rice production in Asia. In direct seedling cultivation competition against weeds is one of most important concern. So, low temperature germinability and mesocotyl elongation should be considered. In this study, we evaluated the mesocotyl length and low temperature germination conducted association analysis using 137 korea core collections. An average length of mesocotyl among 137 core collections was skewed range from 0mm to 43mm. we searched candidate gene around target SNP. Such related traits, genome-wide association study (GWAS) analysis was carried out using GAPIT. Also, average mesocotyl length of 394 korea landrace cultivars was measured ranging from minimum 0 mm to maximum 34mm. 30 out of 394 Korea landrace cultivar conducted re-sequencing, and haplotype analysis of candidate gene. we searched these related resources, which including germination of low temperature and mesocotyl elongation. This could be used for the development of direct-seeding cultivars. The valiated accession of core collection and landrace cultivars will be used development of direct-seedling cultivar in the future.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.4
• /
• pp.672-676
• /
• 2012

This paper studies the relation between the deformation of platen caused by clamping force, the bending stress and elongation at the tie-bar in injection molding machine of toggle type. These data are analyzed through analytical molding and numerical approach by tensile tester. The effect of bending stress on the stress concentration of teeth and nut system is also analyzed by 2 dimensional numerical approach. The bending stress of tie-bar caused by platen deformation becomes less than 20% of average tensile stress. And the effect of bending stress on stress concentration at teeth and nut system of tie-bar is found to be small.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.435-442
• /
• 2002

Fluid Confirmation Tests(FCT) on 1500 ground Anchors install in weathered rock were carried out to investigate upper and lower limit of elastic elongation, frictional resistant of fixed anchor body, mobilized angle between anchor body and soil. All the measured data were analysed and compared with theoretical equations. The frictional angles of diaphragm wall and anchorage system in weathered rock showed nonlinear curve between upper and lower limit of standard elongation. The FCT results indicated that the frictional resistant angles increased with higher values of surcharge load. The quality assurance on the fixed anchor location was investigated by means of measuring elastic elongation during the FCT, and comparing these with theoretical design length, the quality of anchors in this particular site found to be above average standard. The results of this research works with provide valuable guide line on quality assurance of anchors system as well as resonable prediction of friction resistance between the fixed anchor body and the weathered rock.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.405-411
• /
• 2019

In this study, tensile tests were carried out on materials (A516-60, A283-C, A285-C, and SB410) for structural and pressure vessels at temperatures of $20^{\circ}C$, $-20^{\circ}C$, and $-40^{\circ}C$, and the changes in the mechanical properties were analyzed. Compared to the results at $20^{\circ}C$, the average yield stress increased by 6.4% and 7.5% at $-20^{\circ}C$ and $-40^{\circ}C$ for A516-60, while the average tensile stress increased by 1.3% and 4.1%, respectively. The average elongation decreased by 4.7% and 20.4% at these temperatures. In the case of A283-C, the average yield stress increased 8.8% and 9.8%, the average tensile stress increased by 4.1% and 5.9%, and the average elongation rate decreased by 7.4% and 9.9% at $-20^{\circ}C$ and $-40^{\circ}C$, respectively. For A285-C, the average yield stress increased by 1.8% and 8.6%, and the average tensile stress increased by 2.6% and 5.3%, respectively, but there was little change in the average elongation. Finally, for SB410, the average yield stress increased by 7.1% and 11.8%, the average tensile stress increased by 4.3% and 5.5%, but the average elongation rate decreased by 8.7% and 13.5%, respectively.

• Journal of Bio-Environment Control
• /
• v.6 no.1
• /
• pp.34-42
• /
• 1997

Effects of DIF on stem elongation in plug seedlings of mini tomato ‘Mini Carol’ and on the growth and flowering after transplanting were investigated. Stem elongation of seedlings was mainly influenced by day temperature rather than night temperature. When the effect of ＋DIF was compared to that of -DIF under the same average daily temperature(ADT), day temperature had greater impact on internode elongation than night temperature. On the other hand, leaf unfolding rate increased and compactness decreased as ADT in creased. Differences in internode length affected by DIF during seedlings stage DIF progressively diminished during growth period after transplanting. Node position at which first flower was initiated was lowered as ADT decreased. It was concluded that DIF treatment was an applicable tool for control of stem elongation, particularly to reduce stem length without a noticeably adverse effect on the growth and development of plant after transplanting.

• Journal of Astronomy and Space Sciences
• /
• v.34 no.1
• /
• pp.67-73
• /
• 2017

In this paper, we investigate the observations of Venus in daytime that are recorded in the Goryeosa (History of the Goryeo Dynasty, A.D. 918-1392). There are a total of 167 accounts of such observations in this historical book, spanning a period of 378 yr (from 1014 to 1392). These include six accounts where the days of the observation are not specified and two accounts where the phase angles are outside the calculation range of the equation used in our study. We analyze the number distribution of 164 accounts in 16 yr intervals covering the period from 1023 to 1391. We find that this distribution shows its minimum at around 1232, when the Goryeo dynasty moved the capital to the Ganghwa Island because of the Mongol invasion, and its maximum at around 1390, about the time when the dynasty fell. In addition, we calculate the azimuth, altitude, solar elongation, and apparent magnitude of Venus at sunset for 159 observations, excluding the eight accounts mentioned above, using the DE 406 ephemeris and modern astronomical algorithms. We find that the average elongation and magnitude of Venus on the days of those accounts were ${\sim}40^{\circ}$ and -4.5, respectively, whereas the minimum magnitude was -3.8. The results of this study are useful for estimating the practical conditions for observing Venus in daylight with the naked eye and they also provide additional insight into the corresponding historical accounts contained in the Goryeosa.

• Journal of Applied Reliability
• /
• v.10 no.4
• /
• pp.213-235
• /
• 2010

In this paper, we carried out an accelerated degradation test that is commonly used to predict characteristics life of rubber gaskets for a pole transformer. The potential failure mode applied for the test is rubber elongation and the corresponding failure mechanism is heat. From the result, we found that Weibull distribution is the fatigue life distribution in NBR and H-NBR. After estimating characteristics life in commonly used temperature, the average life span of $B_{50}$ in NBR is 7.7 years under $50^{\circ}C$ and the life span in H-NBR is 28 years.

• Journal of the Korea Concrete Institute
• /
• v.20 no.4
• /
• pp.459-467
• /
• 2008

This paper describes a proposal for average crack width and immediate deflection calculation in structural concrete members. The model is mathematically derived from actual bond stressslip relationships and tension stiffening effect between reinforcement and the surrounding concrete, and the actual strains of steel and concrete are integrated respectively along the embedded length between the adjacent cracks so as to obtain the difference in the axial elongation. With these, a model for average crack width and immediate deflection in reinforced concrete flexural members are proposed utilizing difference in the axial elongation and average steel strain and moment-curvature relationship with taking account of bond characteristics. The model is applied to the test specimens available in literatures, and the crack width and deflections predicted by the proposal equation in this study are closed to the experimentally measured data compared the current code provisions.

• Journal of the Korean Wood Science and Technology
• /
• v.18 no.4
• /
• pp.53-64
• /
• 1990

This study was carried out to develop the traditional korean paper changphanji from the bast fiber of paper mulberry The results obtained were as follows: 1. The variations in the basis weight were remarkable, but there were no significant adverse effects on the tensile strength and thickness. 2. The stamping have contributed to the improvement of smoothness and the control of thickness. The automatic pressing system recommended to obtain good control of thickness. 3. The average density of the traditional korean paper changphanji was 1.06g/$cm^3$. 4. The changphanji developed in this study gave a clude, but excellent toughness and warm feeling. Some fiber lumps, dark spots and bamboo, screen marks were also obserded. 5. The tensile strength of four-fold sheet changphanji is highest and those of two-fold sheet changphanji is lowest. the lengthwise tensile strength was higher than crosswise one due to the fiber. 6. The elongation of three-fold sheet changphanji was highest 7. The water absorption of all products ranged from 11.3g/$m^2$ to 17.5g/$m^2$. 8. The wight loss by abrasion was 34.0%(four-fold sheet) 31.6%(three fold sheet), 31.0% (two-fold sheet)respectively. 9. Based on the results obtained. tensile strength and elongation, the four-fold sheet was excellent. the use of the bast fiber of paper mulberry as a raw material is attractive point which can not obtained from the commercial changphanji made from other raw materials.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.3
• /
• pp.296-302
• /
• 1989

The mesocotyl elongation, having much effect on emergence and stand establishment in the direct sowing culture of rice, was investingated and summarized as follows: As to origin of cultivars, the average lengths of mesocotyl were 9.6 mm in the Indica-Japonica hybrid cultivars, 4.4 mm in the native cultivars and 3.2mm in the Japonica type, respectively. The mesocotyl lengths were tjereh, aman, aus, boro and bulu in order, with the mesocotyl lengths of 29.3mm and 5.4 mm in tjereh and bulu, respectively. The mesocotyl lengths were great in Baekkyungjo, Dadajo & Hejo among the native cultivars, in Sangpungbyeo, Paltal & Gokyangdo of the Japonica type and in Weonpungbyeo, Gayabyeo, Milyang 30 & Sujeongbyeo in Indica- Japonica hybrid cultivars, respectively. The mesocotyl length was the greatest at the seeds sampled I week after flowering (39. 3mm in length), and became decreased with the longer grain-filling. The mesocotyl elongated worse with the longer duration of seed storage regardless of seed maturity, and became longer at the 5$^{\circ}C$ storage plot than at the 15 and 25$^{\circ}C$ plots.