Browse > Article
http://dx.doi.org/10.7735/ksmte.2012.21.4.672

Tie-bar Elongation Evaluation of Toggle Type Injection Molding Machine  

Jung, Hyun-Suk (한국기술교육대학교 대학원 메카트로닉스공학과)
Yoo, Joong-Hak (한국기술교육대학교 메카트로닉스공학부)
Publication Information
Journal of the Korean Society of Manufacturing Technology Engineers / v.21, no.4, 2012 , pp. 672-676 More about this Journal
Abstract
This paper studies the relation between the deformation of platen caused by clamping force, the bending stress and elongation at the tie-bar in injection molding machine of toggle type. These data are analyzed through analytical molding and numerical approach by tensile tester. The effect of bending stress on the stress concentration of teeth and nut system is also analyzed by 2 dimensional numerical approach. The bending stress of tie-bar caused by platen deformation becomes less than 20% of average tensile stress. And the effect of bending stress on stress concentration at teeth and nut system of tie-bar is found to be small.
Keywords
Bending stress; Clamping force; Elongation; Injection molding machine;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Jung, H. S., and Yoo, J. H., 2007, "An Experimental Study on Credibility Test of Hydraulic Injection Molding Machine," Journal of the Korean Society for Precision Engineering Autumn Conference, pp. 471-472.
2 Jung, H. S., and Yoo, J. H., 2008, "An Experimental Study on Tie bar Elongation Test of Toggle type Injection Molding Machine," Journal of the Korean Society for Precision Engineering Autumn Conference, pp. 475-476.
3 Jung, H. S., and Yoo, J. H., 2011, "An Experimental Study on the Measurement Performance of Injection molding machine," KSMTE Autumn Conference, pp. 134-135.
4 Jung, S. W., and Kim, J. Y., 2000, "A Study on the Bending Stress of Tie-bar caused by Platen Deformation in the Injection Molding Machine," LG cable technical review, pp. 101-105.
5 Kim, J. S., and Oh, J. H., 2001, "Stress Analysis and Durability Design of Tie Bars of a Hydraulic Injection Molding Machine," LG cable technical review, pp. 99-105.
6 ENGEL Machine, 2008, Operation Manual, Korea, pp. 35-37.
7 Samir, V. A., and John, H. V., 2003, "Minimizing Deflection and Bending Moment in a Beam with End Supports," Georgia Institute of Technology Atlanta, Georgia 30332, pp. 1-22.
8 Choi, B. K., and Lee, D. G., 2010, "A Study on the Process Capability Analysis of MIM Product," Journal of the Korea Society of Machine Tool Engineers, Vol. 19, No. 1, pp. 57-64.
9 Lee, G. T., Oh, S. L., and Kim, J. K,, 2005, "A Study on Measurement Uncertainty of 3-dimensional Coordinate Measuring Machine used for Inspection of Precision Machined parts," Journal of the KSMTE, Vol. 14, No. 2, pp. 55-61.
10 ASIAE, n.d., viewed 22 March 2010,