• Journal of Korean Society for Atmospheric Environment
• /
• v.1 no.1
• /
• pp.33-41
• /
• 1985

In order to investigate the Phenomenon of Acid Precipitation, pH value and Anions of Fluroide, chloride, nitrite, phosphate, bromide, nitrate and sulfate were measured from the acid precipitations sampled around 7 districts over seoul area during period of 9 months from January till September, in 1985. From the distribution of pH value gatnered, acid precipitations were noticed during period from January till Aprill, and from as of April 22nd, situation gradually recovered. The average pH value till April showed comparatively low, ranging 4.0-5.0. The pH value of 4.5-5.6 in average over whole year reaches to similar level of those in Japan. Anion analysis revealed that the main factor of pH value in Seoul district attribute mainly to the sulfate ion and nitrate ion. Moreover, these Phenomena of acid precipitation in Seoul area appeared to concentrate on certain districts, and they are slowly moving toward other directions due to such factors as wind-velocity and directions.

• International Journal of Advanced Culture Technology
• /
• v.9 no.3
• /
• pp.305-314
• /
• 2021

Currently, due to COVID-19, household waste has a lot of impact on the environment due to packaging of food delivery. In this paper, we design and implement Faster-RCNN, SSD, and YOLOv4 models for municipal waste detection and classification. The data set explores two types of plastics, which account for a large proportion of household waste, and the types of aluminum cans. To classify the plastic type and the aluminum can type, 1,083 aluminum can types and 1,003 plastic types were studied. In addition, in order to increase the accuracy, we compare and evaluate the loss value and the accuracy value for the detection of municipal waste classification using Faster-RCNN, SDD, and YoloV4 three models. As a final result of this paper, the average precision value of the SSD model is 99.99%, the average precision value of plastics is 97.65%, and the mAP value is 99.78%, which is the best result.

• Health Policy and Management
• /
• v.28 no.1
• /
• pp.77-86
• /
• 2018

Background: The purpose of this study is to emphasize the importance and necessity of the government's old-age preparation service by measuring the economic value of the old-age service and the policy direction and policy implications of the government's old-age preparation service project. Methods: Contingent Valuation Method (CVM) was used as an analytical method. CV methodology was used to calculate the Willingness to pay (WTP) for old-age preparation service and its value was estimated and the economic benefit of the project was estimated. Results: As a result of the analysis, the average monthly payment amount for the old service was calculated as 5,100 won, and the annual average payment amount was estimated to be 61,197.1 won. Conclusion: The present value of the benefit for 10 years with the discount rate of 5.5% is 484,651 won. Based on the value of peruser benefit, the total benefit value calculation result of the old-age preparation service considering the Willingness to pay for the next 10 years shows that the total benefit value of the old service, which occurs during the period from 2016 to 2025(10 years) was estimated at 415.1 billion won. As a result of calculating the benefit for each scenario, the present value of basic service is higher in all scenarios than the linked service.

• The Research Journal of the Costume Culture
• /
• v.7 no.2
• /
• pp.275-288
• /
• 1999

The purpose of this is providing a simple, relatively errorless body surface area calculation. Subjects were 10 married women and 10 singles women whose age was 20 to 29 years old. The Gypsum method has applied for the sampling of body surface. The Weight method has been used to measure body surface by means of transferring gypsum shape on uniform plane polypropylene films. In this study, compare analyzed errors between the traditional formulas for measuring body surface area and measuring data in this experiment. More than all, it has been to induce a regression equation for measuring body surface area, which is so simple to calculate with less errors, with variable factors as weight and height. The results of this experiment as follows : 1. In the traditional formulas, weight formula was shown high average error : Niya\`s height formula. which was modified K value as 0.62 in the height formula (S = KH) is shown lower average error than Lassabliere\`s Height formula. 2. In the weight-height formula (S=K √WH), it was shown high average error according to the increasing of K value. Kawanami\`s formula, which 5.378 as K value, was shown low average error both the singles and the married women. 3. Dubois weight-heingt formula (S=W/sup a/·H/sub b/·K) was shown low average error than the weight, height, weight-height (S=K√WH) formula. 4. The regression equations with variable factors as weight and height are 156.74W + 86.05H - 660.25 (Single women) and 136.02W + 90.57H - 6241.32 (Married women) the average error and absolute average error to the singles are 0.09%, 0.94% and resoectively -0.13%, 1.16% for the married women.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.2
• /
• pp.44-49
• /
• 2017

In this study, the cutting conditions of moving speed, number of main axial revolutions, etc. are changed for the chrome molybdenum steel (SCM415) material and carbide ball end mill tool to study the changes for processing intensity in the cutting process. The results that confirm the intensity of the measured value of the specimen for SCM415 display the intensity with an average 1.0667 HrC. After the fact cutter, it was able to confirm the average intensity of 8.3815 HrC. In addition, the intensity value after image processing may determine the average intensity survey value of 5.8690 HrC and the different intensity values with image processing after face cutting are shown for an average of ${\pm}2.5125HrC$. The different value of intensity with the specimen and image processing is confirmed for an average of 4.8024 HrC. The results of comparing the intensity following the number of main axial revolutions and moving speed show that the intensity is highest for 3,000 rpm and F200, and lowest for 4,000 rpm and F200.

• Journal of the Korean Home Economics Association
• /
• v.25 no.4
• /
• pp.47-55
• /
• 1987

This study was designed to elucidate the lipid contents, neutral lipids components and fatty acid composition in fresh shellfishes, produced in Korea. Four kinds of shellfishes including sea mussel, short-necked clam, corb shell and and ark shell were selected according to the higher sales order and cheaper retail price at fish markets in Seoul in July 1985. The results abtained were as follows; 1. The average total lipid contents in four shellfishes were 2.3% by wet weight basis. The ratios of neutrial lipid, glycolipid and phospholipid in the total lipid were 51.1 : 4.9 : 44.0 in sea mussel, 66.0 : 3.2 : 30.8 in ark shell, 37.8 : 2.2 : 60.0 in short-necked clam and 54.5 : 2.0 : 53.5 in corb shell, 2. The average value of acid value, iodine value and unsaponifiables contents of total lipids were 1.3, 217.8, 92.0 and 20.3%, respectively. 3. The composition of the neutral lipids were triglycerides, esterified fatty acids, sterylesters, free sterols and monoglycerides in four shellfishes. 4. The major fatty acid composition of total lipids were palmitic, eicosapentaenoic, docosahexaenoic and palmitoleic acids in four shellfishes. The average total unsaturated fatty acids of total lipid were 64.5%, and $\omega$-3 highly unsaturated fatty acids were 27.0%. The average p/s Ratiio were 1.3.

• Asia-Pacific Journal of Business
• /
• v.4 no.2
• /
• pp.41-53
• /
• 2013

Undoubtedly, the basic sinking fund formula gives the future value of a series of equal installments. The main underlying assumption for using this formula is that installment and compounding frequency must be in equal interval. But when installment for a deposit scheme or any other savings scheme and compounding frequency do not occur in an equal interval, which is treated as the complex annuity problems in Finance Literature, the basic sinking fund formula does not give the accurate result. As a result, the obtainable amount from different deposit schemes offered by different banks and financial institutions does not match with the amount of future value calculated through the basic sinking fund formula by the investors or savers. This study focuses the concealed facts for such type of mismatches in values and at the same time it provides a solution through developing a new formula by extending the basic formula intended not only to remove those mismatches but also get the accurate future value from a sinking fund provision in case of complex annuity. Besides, since banks and financial institutions calculate the interest on the average amount of equal installments deposited within a period of time due to complex annuity, the study also formulates an arithmetic formula for calculating the average amount of installment.

• Nuclear Engineering and Technology
• /
• v.56 no.7
• /
• pp.2452-2457
• /
• 2024

To obtain site-specific values of the Derived Concentration Guideline Levels (DCGLs) for decommissioning of KRR-1&2, the soil density and distribution coefficient values for Cs-137, a major contaminant radionuclide, were determined. The soil density was evaluated according to the test method established by the Korean Agency for Technology and Standards of the Ministry of Trade, Industry, and Energy (KATS). The distribution coefficient was evaluated using a batch test. The validity of using the evaluated soil density and distribution coefficient as site-specific values was assessed through radiation dose assessment reflecting these values. Average soil density value obtained was 1.738 g/cm³, which was within the typical range of normal soil density, 1.0-1.8 g/cm³. The average distribution coefficient value was 7,754 mL/g. Applying the maximum, average, and minimum values of the evaluated soil density and distribution coefficient showed similar radiation dose results, thus suggesting that it is reasonable to use the average values of each parameter as site-specific values. Findings of this study can help determine DCGLs that reflect the characteristics of the research reactor site.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.7
• /
• pp.962-967
• /
• 2014

In this paper, through a digital potentiometer and exponentially weighted moving average filter, pulse and PPG waveform measurable device was fabricated in radial artery. If this device is not proper about signal size in analog part, MCU can judge easily by adjusted amplification through digital potentiometer, using exponentially weighted moving average filter is able to filter out more clear value of ADC. I presumed pulse rate as value of measuring time between point of maximum contraction from sensing signal in radial artery of wrist. Therefore, this means can measure stable pulse rate and PPG waveform, finger as well as radial artery, whether signal size of each person is different finger as well as radial artery.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.9
• /
• pp.1299-1307
• /
• 1989

A Korean syllable is regarded as a random variable according to its probabilistic property in occurrence. A Korean syllable is divided into a 'choseong', a 'jungseong', and a 'jongseong' which are regarded as random variables. From the cumulative freaquency of a Korean syllable all possible joint probabilities and conditional probabilities are computed for the three ramdom variables. From the joint probabilities and the conditional probabilities all possible joint entropies and conditional entropies are computed for the three random varibles. Also all possible average mutual informations are calculated for the three random variables. Average mutual informatin between two random variables hss its biggest value between choseong and jungseong. Average mutual information between a random variable and other two random variables has its biggest value between jungseong and choseong-jongseong.