• 한국광학회지
• /
• 제12권6호
• /
• pp.507-510
• /
• 2001

간단한 비선형 증폭 루프에서의 평균 솔리톤 전송의 안정성을 비선형 Schroedinger방정식에 기초한 수치해석법을 이용하여 솔리톤 주기에 대한 증폭 주기의 비율과 루프에서의 erbium doped광섬유의 길이 비율을 변화시켜가며 계산하고 그 결과를 분석하였다. 계산 결과 루프에서의 erbium doped광섬유의 길이 비율이 작을 경우 증폭 주기가 솔리톤 주기에 비해 많이 작아야 한다는 기존의 평균 솔리톤 형성 조건이 완화됨을 알 수 있었다.

• 한국주조공학회지
• /
• 제9권4호
• /
• pp.327-335
• /
• 1989

The matrix structure and the morphology of CV graphite are affected by the addition of many kinds of elements, which are contained in the CV graphite cast iron, additives, fading time and cooling rate. The effects of cooling rate on the matrix structure, the shape of CV graphite, mechanical properties and propagation of ultrasonic wave in hypoeutectic CV graphite cast iron were studied. When the diameters of the samples are 50mm, 35mm and 20mm 1. CV graphite number showed average 17.9% increase and CV graphite length showed 10.3% decrease with decreasing diameter of the samples. 2. The amount of graphite and ferrite showed average 11.2, 4.1 % decrease and the amount of pearlite showed average 15.7% increase. 3. Hardness and tensile strength showed average 3.5%, 11.3% increase and impact strength showed average 1.5% decrease. 4. Ultrasonic wave velocity showed average 1.1% increase.

• 한국주조공학회지
• /
• 제9권4호
• /
• pp.336-344
• /
• 1989

The matrix structure and the morphology of CV graphite are affected by the addition of many kinds of elements, which are contained in the CV graphite cast iron, additives, fading time and cooling rate. The effects of cooling rate on the matrix structure, the shape of CV graphite, mechanical properties and propagation of ultrasonic wave in eutectic CV graphite cast iron were studied. When the diameters of the samples are 50mm, 35mm and 20mm 1. CV graphite number showed average 13.8% increase and CV graphite length showed 12.3% decrease with decreasing diameter of the samples. 2. The amount of graphite and ferrite showed average 10.6, 4.3% decrease and the amount of pearlite showed average 23.4% increase. 3. Hardness and tensile strength showed average 3.2%, 9.5% increase and impact strength showed average 1.3% decrease. 4. Ultrasonic wave velocity showed average 1.1% increase.

• 한국정밀공학회지
• /
• 제15권3호
• /
• pp.50-60
• /
• 1998

This paper is concerned with the design of two residual control charts for real-time monitoring of the continuous flow processes. Two different control charts are designed under the situation that observations are correlated each other. Kalman-Filter based model estimation is employed when the process model is known. A black-box approach, based on Back-Propagation Neural Network, is also applied for the design of control chart when there is no prior information of process model. Performance of the designed control charts and traditional control charts is evaluated. Average run length(ARL) is adopted as a criterion for comparison. Experimental results show that the designed control chart using the Neural Network's modeling has shorter ARL than that of the other control charts when process mean is shifted. This means that the designed control chart detects the out-of-control state of the process faster than the others. The designed control chart using the Kalman-Filter based model estimation also has better performance than traditional control chart when process is out-of-control state.

• Journal of the Optical Society of Korea
• /
• 제20권1호
• /
• pp.1-7
• /
• 2016

Using coherence theory, the partially coherent flat-topped vortex hollow beam is introduced. The analytical equation for propagation of a partially coherent flat-topped vortex hollow beam in turbulent atmosphere is derived, using the extended Huygens-Fresnel diffraction integral formula. The influence of coherence length, beam order N, topological charge M, and structure constant of the turbulent atmosphere on the average intensity of this beam propagating in turbulent atmosphere are analyzed using numerical examples.

• Corrosion Science and Technology
• /
• 제9권2호
• /
• pp.57-66
• /
• 2010

Since nuclear power plants are being operated under high temperature and high pressure, on-line monitoring technique to detect corrosion could be more effective than off-line method in shut-off period. In this operating condition, electrochemical noise method may be suitable to monitor the corrosion. This paper aims the analysis on the relation between the cracking and electrochemical noise signal of Alloy 600 under U-bending. When electrochemical noise monitoring technique was used during SCC test, it was judge to be obvious that if cracks generate, its generation can be detected by electrochemical current noise. Cracking-related noise was defined as the noise showing 5~10 times greater than the average value of background noise bands. On the base of crack noise, crack initiation time was determined. From SCC test and electrochemical noise monitoring in $25^{\circ}C$, 0.1 M $Na_2S_4O_6$ solution (Reverse U-Bended Alloy 600 SE+), average crack initiation time was obtained as 9,046 seconds and from its initiation time, it could be defined that net crack propagation rate is the crack length divided by ${\Delta}T$(= total test period - crack initiation time). Therefore, average net crack propagation rate was obtained to be $1.18{\times}10^{-9}\;m/s$.

• Journal of Magnetics
• /
• 제22권1호
• /
• pp.34-42
• /
• 2017

Material defects in the Steam Generator Tubes (SGT) of sodium cooled fast breeder reactor (PFBR) can lead to leakage of water into sodium. The water and sodium reaction will lead to major accidents. Therefore, the examination of steam generator tubes for the early detection of defects is an important requirement for safety and economic considerations. In this work, the Magnetic Flux Leakage (MFL) based Non Destructive Testing (NDT) technique is used to perform the defect detection process. The rectangular notch defects on the outer surface of steam generator tubes are modeled using COMSOL multiphysics 4.3a software. The obtained MFL images are de-noised to improve the integrity of flaw related information. Grey Level Co-occurrence Matrix (GLCM) features are extracted from MFL images and taken as input parameter to train the neural network. A comparative study on characterization have been carried out using feed-forward back propagation (FFBP) and cascade-forward back propagation (CFBP) algorithms. The results of both algorithms are evaluated with Mean Square Error (MSE) as a prediction performance measure. The average percentage error for length, depth and width are also computed. The result shows that the feed-forward back propagation network model performs better in characterizing the defects.

• 한국경제지리학회지
• /
• 제15권1호
• /
• pp.77-94
• /
• 2012

본 연구의 목적은 우리나라 지역 산업의 수직적 생산 분화를 분석하는 데 있다. 본 연구에서는 2005년 16개 지역 간 산업연관표를 대상으로 현시비교우위지수를 적용하여 지역 산업의 이출경쟁 및 이입대체 능력을 분석하였고 평균전파길이를 추정하여 산업의 분화 정도를 평가하였다. 그 결과로 우선, 경남지역에서는 전기가스수도업에 대해, 인천, 광주 지역에서는 소비제조업에 대해 이출 경쟁력 및 이입 대체 경쟁우위가 나타났다. 또한 평균전파길이는 해당 지역이 공간적, 사회경제적으로 인접할수록, 간접 생산유발효과의 비중이 클수록 높게 나타났다. 산업기반이 발달한 지역일수록, 타 산업에 중간재를 공급하는 기능이 강할수록 생산 사슬 내에서 전방에 위치하였다. 마지막으로 대규모 공단 입지 지역의 제조업 및 서울 소재 서비스업은 전, 후방 평균전파길이가 모두 길게 나타나 이들 산업의 분화 정도가 높으며 산업군의 동반성장을 유도하는 선도 산업의 성격을 갖는다고 볼 수 있다.

• 한국안전학회지
• /
• 제26권2호
• /
• pp.32-35
• /
• 2011

다중 장애물을 가지는 폭발챔버에서 전파하는 화염과 국부 장애물의 상관관계를 조사하기 위하여 실험적 연구를 수행하였다. 폭발챔버 높이 235 mm, 단면적 $1,000{\times}950\;mm^2$, 벤트면적 $1,000{\times}320\;mm^2$를 가지는 폭발챔버를 제작하였으며, 30% blockage ratio를 가지는 장애물을 챔버내에 설치하였다. 전파하는 화염과 장애물의 상관관계를 조사하기 위해 고속카메리를 사용하였다. 고속카메라로 얻어진 화염 이미지로부터 장애물 주위의 국부 화염전파 거동은 2가지 다른 방법, 즉 전파하는 화염전면(flame front)의 각 pixel point에서 산정된 평균 화염전파속도와 연소면적 증가(incremental burnt area)/화염전면 길이(flame front length) 관점에서 분석하였다. 분석결과, 2가지 방법으로 얻은 결과는 거의 일치하는 경향을 나타났으며, 전파하는 화염이 장애물의 전면과 상호 작용할 때 화염속도는 급격히 증가하다가 장애물의 후단면에서 약간 감소하고, 화염이 장애물 후단에서 재결합될 때 다시 급격히 증가하였다.

• Structural Engineering and Mechanics
• /
• 제46권3호
• /
• pp.417-431
• /
• 2013

This paper presents responses of the free end of a cantilever micro beam under the effect of an impact force based on the modified couple stress theory. The beam is excited by a transverse triangular force impulse modulated by a harmonic motion. The Kelvin-Voigt model for the material of the beam is used. The considered problem is investigated within the Bernoulli-Euler beam theory by using energy based finite element method. The system of equations of motion is derived by using Lagrange's equations. The obtained system of linear differential equations is reduced to a linear algebraic equation system and solved in the time domain by using Newmark average acceleration method. In the study, the difference of the modified couple stress theory and the classical beam theory is investigated for the wave propagation. A few of the obtained results are compared with the previously published results. The influences of the material length scale parameter on the wave propagation are investigated in detail. It is clearly seen from the results that the classical beam theory based on the modified couple stress theory must be used instead of the classical theory for small values of beam height.