• Journal of Microbiology and Biotechnology
• /
• 제13권5호
• /
• pp.789-793
• /
• 2003

This study focused on the optimization of the illumination method for efficient use of light energies in a photobioreactor. In order to investigate the effect of radiator position, a model simulation study was carried out using Synechococcus sp. PCC 6301 and an internally radiating photobioreactor as a model system. The efficiency of light transfer in a photobioreactor was analyzed by estimating the average light intensity in a photobioreactor. The simulation result, indicate that there exists an optimal position of internal radiators, and that the optimal position varies with radiator number and cell concentration. When light radiators are placed at the optimal position, the average light intensity is about 30% higher than that obtained by placing radiators at the circumstance or center of a photobioreactor. The method presented in this work may be useful for improving light transfer efficiency in a photobioreactor.

• 한국방사선학회논문지
• /
• 제11권4호
• /
• pp.213-219
• /
• 2017

본 연구의 목적은 초음파 검사실의 검사환경 설정에 있어 실증적인 기초자료를 제공하는 것에 그 목적을 두고 새로운 초음파 검사실의 검사환경을 설계함에 있어 검사실의 적정조도를 설정하는데 기초자료로 제공하고자 한다. 방법으로는 부산에 소재하고 있는 종합병원 6군데 48곳의 초음파 검사실을 대상으로 조도와 관련된 초음파실 환경을 조사하고 초음파 검사대상자에게 초음파 검사실 환경에 대하여 설문조사를 실시하였다. 결과로는 초음파 검사실 차폐체의 종류에서는 성별, 연령별, 검사부위에 따른 분석에서 모두 Door+Curtain에서, 광원의 종류에서는 LED, 광원조절기가 필요하다에서 점수가 높게 나타났다. 초음파 검사실 환경조사에서는 초음파 검사실 조도 밝기는 평균 10 Lux로서 WHO와 CEC에서 권고하는 조도 밝기범위에 포함되고 있었으며 초음파 검사 대기실 조도 밝기(초음파 검사 대기실, 복도)는 평균 300~800 Lux를 나타내어 KSA 3011에서 권고하는 병원의 조도환경인 300 Lux이상을 만족하였다. 결론적으로 초음파 검사 대상자의 일반적인 배경과 초음파 검사실 관련 환경 요인을 분석한 결과를 토대로 향후 초음파 검사실 환경을 개선하거나 새로운 검사실을 설계함에 있어 기초자료로 제공하고자 한다.

• 수산해양기술연구
• /
• 제16권1호
• /
• pp.27-35
• /
• 1980

빛에 대한 어류의 행동을 조사하기 위항 돌돔 Oplegnathus fasciatus 과 복섬 Fugu niphobles 에 빛의 세기가 서로 다른 여섯가지 백색인공광원으로 광을 주어, 그에 대한 반응을 주야에 각각 조사한 결과는 다음과 같다. 1. 제한된 실험수내에서의 광에 대한 구간별분포는 두 어종이 모두 구간에 많이 모여 분포은 대체로 U자형이되었다. 2. 돌돔은 수중도가 어떤값보다 높아지거나 낮아지면 광원쪽에 더 많이 모이는 경향을 보였으며, 주야간에 비슷하였다. 복섬은 수중도가 어떤 값보다 높아지거나 낮아지면 광원에서 멀리 떨어지는 경향을 보였으며 주야간에 다소의 차이가 있었다. 3.집어솔이 최대가 되는 평균수중조도(적정조도)는 돌돔이 162.0 lux (104.3-238.1 lux)로서 주야간에 같았으며, 복섬은 주간에 16.6 lux (10.6-24.5 lux), 야간에 1.9 lux (1.2-2.9 lux)로서 주간에 더 높았다. 4. 조명시간에 따른 집어솔은 돌돔의 경우 점등후 시간이 경과함에 따라 증가하는 경향을 보였으며, 야간보다 주간에 그 변화가 심했다. 복섬은 시간이 경과함에 따라 완만하게 증가하였으며, 야간보다 주간에 그 변화가 다소 심했다.

• 한국축산시설환경학회지
• /
• 제11권3로
• /
• pp.177-188
• /
• 2005

In this study, the thermal environmental factors in a layer f(arm such as dry bulb temperature, relative humidity, black globe temperature and illumination intensity were measured and analyzed to serve as basis for effective design and plan of poultry houses. The correlation analysis between the different factors was also done. Heat Index as measure of the thermal stress was also calculated and analyzed. A $1,000m^2$ laying house, 4 meters high with 52,000 layers in six-stage type cages was used in the measurement of the different environmental parameters. The results were as follows; 1. The temperature of the inside air and materials was directly related to the increase in aerial temperature based on the dry-bulb, black globe temperature reading. The correlation factor of the outside to inside air based on dry bulb setting was very significant at 0.927 The dry bulb temperature for inside temperature ranged from $19.9\~28.8^{\circ}C\;with\;SD+2.2^{\circ}C$ while that of the outside air was $16.2\~33.1^{\circ}C,\;SD+3.5^{\circ}C$. In addition, the temperature of the inside air was very stable. 2. The black globe temperature of the inside air ranged from $20.1\~28.8^{\circ}C,\;SD+2.3^{\circ}C$ while that of the outside air was $16.2\~47.5^{\circ}C,\;SD+6.0^{\circ}C$. 3. The relative humidity of the outside and inside air was $72.4\~100\;and\;50.2\~85.6\%$ with an average of $89.2\;and\;71.7\%$, respectively. 4. The illumination intensity in the laying house was less than 7 lux, with an average of $1.2\~2.5lux$ relative to height indicating that the laying house was well isolated from outside radiation. 5. The heat index of the inside air of the laying house had a high variation from $20.5^{\circ}C,\;SD+2.5^{\circ}C$ while that of the outside air was $13.1\~45.5^{\circ}C$, with an average of $21.6^{\circ}C,\;SD+6.3^{\circ}C$.

• Journal of the Optical Society of Korea
• /
• 제19권1호
• /
• pp.102-111
• /
• 2015

This paper proposes an algorithm for recovering the colors of objects from multiple near-infrared (near-IR) images. The International Commission on Illumination (CIE) color coordinates of objects are recovered from a series of gray images captured under multiple spectral near-IR illuminations using polynomial regression. The feasibility of the proposed algorithm is tested experimentally by using 24 color patches of the Color Rendition Chart. The experimental apparatus is composed of a monochrome digital camera without an IR cut-off filter and a custom-designed LED illuminator emitting multiple spectral near-IR illuminations, with peak wavelengths near the red edge of the visible band, namely at 700, 740, 780, and 860 nm. The average color difference between the original and the recovered colors for all 24 patches was found to be 11.1. However, if some particular patches with high value are disregarded, the average color difference is reduced to 4.2, and this value is within the acceptability tolerance for complex image on the display.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.162-162
• /
• 2010

In this study, optical analysis for 100W LED safety street lighting was conducted. Experimental research on such single LED was the first undertaken. simulation modeling based on optical properties of single LED has compared single LED product also designed 100W simulation modeling has compared average road illuminance with Korean Industrial Standards for LED safety street lighting(KS C7658:2009). 100W safety street lighting (model: CE180-ST-OS) designed by simulation has been also compared between product and 100W simulation modeling, and error rates have showed average 5.6[%]. Designed 100W LED safety street lighting base on simulation modeling was proven by comparison experiments. Through the simulations and the corresponding analysis, it was found that the tested 100W LED safety street lamp had reasonable performance. Design method for LED safety Street lamps have been summarized, based on the optical analysis.

• 조명전기설비학회논문지
• /
• 제26권4호
• /
• pp.6-13
• /
• 2012

In this paper, we took an indirect reflectance type that irradiates light from an LED module, which reflects light from a reflector onto the road. This LED pedestrian lighting design produces minimal glare from a relatively simple structure. Using LightTools 7.2, we conducted a study on the varying shape and curvature of the reflector. In order to further investigate this data, we researched the ratio of the DLOR and ULOR, the average illuminance, and the uniformity of the illumination. Based on this research, we selected optimum conditions to realize the actual LED pedestrian lighting using RELUX software. We found the average illuminance value to be 22[1x] and the illuminance uniformity ratio to be 0.23, which met the criteria of the proposed standards set in KS C 7658. In addition, it also satisfied the criteria of the standards set in KS A 3701 by having TI (Threshold Increment) at 7[%].

• KIEAE Journal
• /
• 제14권1호
• /
• pp.15-22
• /
• 2014

Among the various building envelope elements, the glass area takes up the largest portion in the office building design. However, a large area of glass can cause problems such as excessive solar radiation, thermal comfort, and glare. Thus it is important to install the glass area to an appropriate level, and control solar radiation and inflow of daylight with blind devices. This study aims to improve the visual performance of the work plane through the automatic control of the venetian blinds. A total of eight kinds of control strategies were chosen; Case 1 does not control the blinds, Case 2 with the blind slats fixed at the angle of 0 degree, Case 3 to 6 using the existing blind control programs, and Case 7 and 8 with improved blind control. Case 3 with 90 degrees had the best energy performance, but the average indoor illuminance was 113lux, which is below the standards. Cases 4 and 5 showed higher levels of interior daylight illuminance with the average of 281lux and 403lux respectively. However, the fixed angles may have difficulties controlling excessive direct sunlight coming into the room and may cause glare. Cases 6 and 7 used sun tracking angle control and cut-off angle control, and the average interior illuminance was measured 250lux and 385lux respectively. Case 8 used the cut-off angle control in an hourly manner, satisfying the standard illuminance of 400lux with an average interior illuminance of 561lux. It was evaluated to be the best method to control direct solar radiation and to guarantee proper level of interior illumination.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 추계학술대회
• /
• pp.376-378
• /
• 2021

세계기상기구가 발표한 2020년 글로벌 기후 보고서에 따르면, 2019년 지구의 평균 온도는 산업화 이전인 1850년에서 1900년사이에 측정된 온도보다 평균 1.1℃ 높게 측정되었다. 평균온도의 변화는 기온 상승이 식물 분포에 미치는 영향과 취약성 분석 논문의 따르면 평균온도의 상승시 식물의 분포되는 지역의 변화가 있다는 것을 알 수 있다. 본 논문에서는 이러한 환경 변화에 대응하기 위해, 아두이노와 센서를 사용하여 간헐흐름식 수경재배 스마트팜을 제작하고, PC와 어플리케이션을 통하여 제어하는 방법을 제안한다. 제작된 수경재배 스마트팜은 농장의 온습도, 양액의 ph농도, 조도, 수질의 정도를 파악하고, 양액의 양과 보충 필요 농도 확인, 조도의 따른 생장 LED 제어, 센서의 상태를 파악하여 농장의 전체적인 관리와, 식물의 모종 옮겨심기 이후의 적절한 환경에서 성장할 수 있도록 제어한다.

• 한국정보처리학회논문지
• /
• 제6권11호
• /
• pp.3165-3177
• /
• 1999

With the recent outstanding advance in computer software and hardware, a number of researches to enhance the manufacturing speed and the process accuracy has been undertaken in many fields of textile industry. Frequently issued problems of automatic recognition of textile wrinkles in a grey scale image are as follows. First, changes in grey level intensity of wrinkles are so minute. Second, as both colors and patterns in a grey scale image appear in grey level intensity, it is difficult to sort out the wrinkle information only. Third, it is also difficult to distinguish grey level intensity changed by wrinkles from those by uneven illumination. This paper suggests a method of automatic recognition of textile wrinkles that can solve above problems concerned with wrinkles, which can be raised in a manufacturing process as one of errors. In this paper, we first make the outline of wrinkles distinctly, apply the block matching algorithm used in motion estimation, and then estimate block locations of target images corresponding to blocks of standard images with the assumption that wrinkles are kind of textile distortions caused by directional forces. We plot a "wrinkle map" considering distances between wrinkles as depths of wrinkles. But because mismatch can occur by different illumination intensity and changes in tensions and directions of the force, there are also undesirable patterns in the map. Post processing is needed to filter them out and get wrinkles information only. We use average grey level intensity of wrinkle map to recognize wrinkles. When it comes to textile with colors and patterns, previous researches on wrinkles in grey scale image hasn't been successful. But we make it possible by considering wrinkles as distortion.istortion.