• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2003년도 Proceedings of the international symposium on the fusion technology
• /
• pp.548-552
• /
• 2003

During the last few decades, the frequency and distribution of rockfalls have been increased in Korea due the development of rock slope in mountain areas. Although the scale of, falling block of rockfall was small, there were some casualties of lives and loss of properties. In order to reduce damage from rockfall, analysis on rock slope indanger of rockfall should be carried out. Thus, the simulation softwares for rockfall behavior analysis have been introduced. In this study, geotechnical investigation and input data for rockfall simulation are described with the comparison among four commercially available rockfall simulation softwares. Finally, rockfall simulation works are described by exmining a case of inaccessible rock-slope of potential rockfall in Korea.

• 한국항공운항학회지
• /
• 제16권2호
• /
• pp.21-27
• /
• 2008

An inverse method is introduced to construct the problem for the error analysis of the numerical solution of initial value problem. These problems constructed through this method have a known exact solution, even though analytical solutions are generally not obtainable. The process leading to the exact solution makes use of an initially available approximate numerical solution. A smooth interpolation of the approximate solution is forced to exactly satisfy the differential equation by analytically deriving a small forcing function to absorb all of the errors in the interpolated approximate solution. Using this special case exact solution, it is possible to investigate the relationship between global errors of a candidate numerical solution process and the associated tuning parameters for a given problem. Under the assumption that the original differential equation is well-posed with respect to the small perturbations, we thereby obtain valuable information about the optimal choice of the tuning parameters and the achievable accuracy of the numerical solution.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1998년도 봄 학술발표회 논문집
• /
• pp.33-40
• /
• 1998

Although a structural analysis based on e linear elastic theory yields good results for deformations and stresses produced by working loads, it fails to assess the teal load-carrying of the plates on the verge of yielding. In case of a limit analysis of plates, the yield line theory is widely used on the basis of the upper bound theorem and theoretically it overestimates the strength of the plate. There is, therefore, a general need for analytical methods of predicting the inelastic behavior and load-carrying capacities of plate subjected to arbitrary loadings and boundary conditions. The $\rho$-version of finite element method has been presented for determining the accurate limit load of plates. The numerical results by $\rho$-version model compares with the results obtained by the h-version software ADINA as well as with the available analytical solutions in literatures.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1990년도 가을 학술발표회 논문집
• /
• pp.34-39
• /
• 1990

For the analysis of structures, specifically if it is large-scale, in which case it can not be solved within the core memory, the majority of computation time is consumed In the solution of simultaneous linear equation. In this study an efficient in- and out-of-core column solver for sparse symmetric matrix utilizing memory moving scheme is developed. Compare with existing blocking methods the algorithm is simple, therefore the coding and computational efficiencies are greatly enhanced. Upon available memory size, the solver automatically performs solution within the core or outside core. Analysis example shows that the proposed method efficiently solve the large structural problem on the small-memory microcomputer.

• 대한임상검사과학회지
• /
• 제42권3호
• /
• pp.111-115
• /
• 2010

A 15-year-old female with primary amenorrhea and Tuner's syndrome feature was referred for a chromosome analysis. The karyotype of the patient was 45,X/46,X,der(Y) mosaicism under initial GTG-banding analysis. Fluorescence in situ hybridization (FISH) analysis with probe for CEP X probes and SRY probe (Vysis, Inc. Downers Grove, IL 60515, USA) was carried out. This probe is direct labeled with SpectrumOrange (SRY, Yp11.3) and is available as a single probe or mixed with the CEP X SpectrumGreen probe. SRY SpectrumOrange/CEP X SpectrumGreen hybridized to a specimen obtained from an two isodicentric Y chromosomes. The karyotype of the patient was ish Xcen(DXZ1x1)/Xcen(DXZ1x1), Yp11.3(SRYx2) by using FISH. This karyotype was considered a variant of Tuner syndrome with mixed gonadal dysgenesis (MGD), male pseudohermaphroitism (MPH) and apparently normal male.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권4호
• /
• pp.154-162
• /
• 2022

This study aimed to systematically review the available body awareness interventions in patients with musculoskeletal disorders. A total of 3,462 studies were searched in relevant databases using the search keywords, and six studies that met the selection criteria after review were included in the final analysis. The qualitative level of the studies was classified using the five levels of evidence-based classification, and systematic analysis was conducted according to PICO model (patient/population, intervention, comparison and outcomes). Of the six studies included in the final analysis, there were one, three, and two randomized controlled trials, non-randomized two-group studies, and case reports, respectively. Body awareness therapy was applied to patients with idiopathic scoliosis, non-specific musculoskeletal disorder, hip osteoarthritis, and amputation, who showed positive improvements after the interventions. Our results suggested that body awareness therapy is an important intervention with positive effects on the recovery of patients with musculoskeletal disorders.

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권13호
• /
• pp.5407-5413
• /
• 2015

Background: Published data regarding associations between the P275A polymorphism in the macrophage scavenger receptor 1 (MSR1) gene and prostate cancer (PCa) risk are inconclusive. The aim of this study was to comprehensively evaluate the genetic risk of P275A polymorphism in MSR1 gene for PCa. Materials and Methods: A systematic literature search was carried out in Pubmed, Medline (Ovid), Embase, CBM, CNKI, Weipu, and Wanfang databases, covering all available publications (last search was performed on Apr 27, 2015). Statistical analysis was performed using Revman 5.2 and STATA 10.1 software. Results: A total of 5,017 cases and 4,869 controls in 12 case-control studies were included in this meta-analysis. When all groups were pooled, there was no evidence that the P275A polymorphism had a significant association with PCa under dominant (OR=0.93, 95%CI=0.81-1.06, and p=0.28), co-dominant (homogeneous OR=0.97, 95%CI=0.56-1.68, and p=0.92; heterogeneous OR=0.93, 95%CI=0.74-1.15, and p=0.49), recessive (OR=1.10, 95%CI=0.65-1.87, and p=0.73), over-dominant (OR=0.93, 95%CI=0.75-1.15, and p=0.50), and allelic (OR=0.95, 95%CI=0.77-1.16, and p=0.61) genetic models. For stratified analyses by ethnicity and study design, no significant associations were found in the white race, the yellow race, the black race and mixed ethnicity, and the population-based case-control (PCC) and hospital-based case-control (HCC) studies under all genetic models. Conclusions: Based on our meta-analysis, the P275A polymorphism in the MSR1 gene is unlikely to be a risk factor for PCa.

• 한국강구조학회 논문집
• /
• 제19권5호
• /
• pp.473-482
• /
• 2007

합성보가 구조적으로 안전하게 거동하고, 합성단면이 고유의 극한모멘트를 발휘하기 위해서는 전단연결재의 강도뿐만아니라 연성적 거동이 전제조건으로 작용한다. 본 연구에서는 고강도 콘크리트가 사용된 합성보에서 하중형태, 합성율 및 전단스터드의 배치를 달리 하였을 때 일반강도 콘크리트가 사용된 경우에 비해 비교적 적은 스터드의 변형능력이 구조거동 및 설계조건에 미치는 영향을 유한요소해석을 통해 분석하여 보았다. 해석결과에 따르면 고강도 콘크리트를 사용한 합성보의 부분합성 설계에서는 스터드 자체의 강도와 상대변위로 평가되어지는 변형능력이 함께 고려되어야 한다. 특히, 스터드가 등간격으로 배치된 합성보에 등분포 또는 유사 형태의 하중이 작용할 경우 스터드의 변형능력이 합성설계에 대한 제약조건으로 작용하며 이러한 경우 스터드는 외부하중에 대한 전단력의 분포를 고려하여 배치되어야 한다.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제30권3_4호
• /
• pp.293-307
• /
• 2003

객체지향 개발이 보편화되었지만 객체지향 프로젝트를 지원하는 소프트웨어 관리 기법에 대한 연구가 미흡하다. 또한, 기존의 소프트웨어 관리 기법을 객체지향 프로젝트에 적용하는 것 역시 어려움이 있다. 특히, 늘어가는 객체지향 기반의 대형 프로젝트에 적합한 프로젝트 계획 기법에 대한 연구가 미흡하다. 본 논문에서는 객체지향 프로젝트를 위한 관리 요소 중 스케줄링에 대한 체계화된 기법을 제안한다. 시스템의 기능적인 요구사항이 기술된 Use Case 다이어그램을 이용하여 객체지향 프로젝트 스케줄을 도출해 가는 과정을 Use Case 식별, 상호의존성 분석을 통한 초기 PERT 차트 작성, 각 Use Case의 특성 규명, Iteration 개수 결정, Iteration에 Use Case 할당, 유용한 자원과 제약 사항 고려, Revised PERT 차트 작성의 7 단계로 나누어 제안한다. 각 단계에 내한 입력 물과 중간 산출물, 그리고 수행 지침을 제시한다. 본 논문의 프로젝트 스케줄링 기법은 짧은 개발 기간 동안 고품질의 소프트웨어 생산에 목적을 둔 프로젝트 계획 단계에서 효율적인 기법으로 사용된다.

• Nuclear Engineering and Technology
• /
• 제31권6호
• /
• pp.8-22
• /
• 1999

This study was performed to comparatively evaluate selected Human Reliability Analysis (HRA) methods which mainly focus on cognitive error analysis, and to derive the requirement of a new human error analysis (HEA) framework for Accident Management (AM) in Nuclear Power Plants (NPPs). In order to achieve this goal, we carried out a case study of human error analysis on an AM task in NPPs. In the study we evaluated three cognitive HEA methods, HRMS, CREAM and PHECA, which were selected through the review of the currently available seven cognitive HEA methods. The task of reactor cavity flooding was chosen for the application study as one of typical tasks of AM in NPPs. From the study, we derived seven requirement items for a new HEA method of AM in NPPs. We could also evaluate the applicability of three cognitive HEA methods to AM tasks. CREAM is considered to be more appropriate than others for the analysis of AM tasks, HRMS is also applicable to the error analysis of AM tasks. But, PHECA is regarded less appropriate for the predictive HEA technique as well as for the analysis of AM tasks. In addition to these, the advantages and disadvantagesofeachmethodaredescribed.