• Journal of KIISE:Information Networking
• /
• v.34 no.2
• /
• pp.100-109
• /
• 2007

Streaming protocol with the Available Bandwidth measurement scheme has problems that are to measure a Available Bandwidth uncorrectly and slowly. In this basis, in order to overcome limitations of the previous streaming protocols, we propose the NABO that is a New Available Bandwidth measurement scheme used by OWD(One-Way Delay). Proposed NABO(New Available Bandwidth measurement based on OWD) measures the constant transmission delay occurred by bottleneck link capacity and the variable delay. Competing traffic contribute to the variable delay. Through the measurement of the constant transmission delay and the competing traffic, a NABO can measure the Available Bandwidth correctly and fast in network. The simulation result proves that the proposed NABO has a performance that satisfies both accuracy viewpoint and measurement speed viewpoint.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.5
• /
• pp.303-309
• /
• 2016

This paper presents a channel-adaptive rate control algorithm for low delay video coding. The main goal of the proposed method is to adaptively use the unknown available channel bandwidth while reducing the end-to-end delay between encoder and decoder. The key idea of the proposed algorithm is for the status of the encoder buffer to indirectly reflect the mismatch between the available channel bandwidth and the generated bitrate. Hence, the proposed method fully utilizes the unknown available channel bandwidth by monitoring the encoder buffer status. Simulation results show that although the target bitrate mismatches the available channel bandwidth, the encoder efficiently adapts the given available bandwidth to improve the peak signal-to-noise ratio.

• Journal of KIISE:Information Networking
• /
• v.32 no.4
• /
• pp.495-507
• /
• 2005

Measuring the end-to-end available bandwidth in the Internet is a useful tool for distributedapplication services or QoS (Quality-of-Service) guarantee. To measure the end-to-end available bandwidth, Single-hop Gap model-based packet train measurement techniques are well-known. However, the error of packet train output gap can happen by network topologies. This error of the output gap causes the inaccuracy of the available bandwidth measurement. In this paper, we propose a new end-to-end available bandwidth measurement technique with accurate capacity measurement and fast convergence methods. To solve the erroneous capacity measurement problem of the back-to-back packet train transmission, we propose a new available bandwidth measurement method by decoupling the capacity measurement with the initial gap of the packet train. Also, we propose a new technique to predict the proper initial gap of the packet train for faster convergence. We evaluate our proposed method by the simulation in various topologies comparing with previous methods.

• The Journal of the Korea Contents Association
• /
• v.10 no.9
• /
• pp.36-44
• /
• 2010

In this paper, we propose video quality control system(VQCS) which can control video service quality through the monitoring of end-to-end available bandwidth for video streaming service like IPTV in NGN convergence network. Various multimedia services such as video, voice and gaming service can be provided by IPTV, and these services require large amounts of bandwidth. At this time, video quality degradation like video jerkiness, block distortion and blurring is caused when network available bandwidth is insufficient. Available bandwidth monitoring method is need to stably control video streaming quality. So, we periodically calculate the amount of the packets in link and measure available bandwidth by using total length field in IP header at terminal. Scalability extractor in network selects suitable video streaming data rate based on available bandwidth and transports video streaming with adaptive data rate to prevent video quality deterioration.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.6
• /
• pp.27-31
• /
• 1995

In this paper, the determination method of available bandwidth for automation of the split-spectrum processing(SSP) has been studied. The SSP is used for the visibility enhancement of the ultrasonic signal with grain noise. Even though the SSP has proved useful in signal-to-noise ratio enhancement, its application and automation have been limited due to ambiguity in the determination of available bandwidth. Until recently, it is the usual practice to optimize the available bandwidth by trial and error. The spectral histogram is the statistical distribution of the spectral windows that is selected by the minimization algorithm with the whole band of the spectrum of the received ultrasonic signal. Since the available bandwidth can be determined adaptively using spectral histogram, this method can be used for automation of the SSP. In order to evaluate the determination technique of the available bandwidth using spectral histogram, this method is applied to experimental ultrasonic data. The experimental results show that the spectral histogram is an efficient method for determination of the available bandwidth and automation of the SSP.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12B
• /
• pp.2275-2282
• /
• 1999

In ATM networks, bandwidth allocation using available bandwidth is important to control ABR traffic efficiently. However, it is difficult to dynamically assign bandwidth on bursty traffic, because the tracking of the existing available bandwidth information uses statistical value. In this paper, we propose a output-bufferd ATM switch using Per-VC queueing scheme with timer and Controller. The controller determines whether each VC is in congestion state or not, and the timer can assign dynamically as determining the available bandwidth for the Present period by Backlogged time and total link capacity, and then transmitting the determined bandwidth to source. Instead of using statistical parameters, the proposed scheme can improve link efficiency as allocating the bandwidth of the next period, by use of measured bandwidth during the current period.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.1
• /
• pp.89-96
• /
• 2000

ABR service is defined by ATM Forum and ITU for the efficient use of link bandwidth, and 2-pass service policing is proposed for this service. 2-pass service policing is effective by the real-time measurement of the used bandwidth, and this scheme obtains multiplexing gam and control efficiently ABR traffic as dynamically allocating rate by residual bandwidth information. In this study, we propose the real-time bandwidth prediction scheme for ABR traffic control, as using dynamic rate allocation by available bandwidth information. This study can obtain the simple hardware structure by means of as predicting available bandwidth by the total link bandwidth and the sum of transmission rate on the backlogged state connections.

• IEIE Transactions on Smart Processing and Computing
• /
• v.6 no.4
• /
• pp.276-280
• /
• 2017

This paper presents computationally efficient image compression for wireless transmission of high-definition video, to adaptively utilize available channel bandwidth and improve image quality. The method indirectly predicts an unknown available channel bandwidth by monitoring encoder buffer status, and adaptively controls a quantization parameter to fully utilize the bandwidth. Experimental results show that the proposed method is robust to variations in channel bandwidth.

• Journal of Broadcast Engineering
• /
• v.23 no.6
• /
• pp.813-823
• /
• 2018

UHD content is characterized by higher bandwidth requirements to provide seamless playback. The existing HTTP adaptive streaming scheme periodically requests video segment of lower quality than the available bandwidth in the steady state. In the steady state, the On-Off pattern is repeated due to the difference of the available bandwidth and the encoding rate of the content. And the repeated Off interval is causing the problem that can not efficiently use the available bandwidth. In the wireless environment where the delay and loss rate are higher with large bandwidth fluctuations, this problem is exacerbated because the available bandwidth is estimated inaccurately. Therefore, in this paper, we propose a segment scheduling scheme for efficient bandwidth utilization of UHD contents streaming in wireless environment. Proposed scheme is a group segment that simultaneously reqeusts multiple segments in one request message in order to reduce frequency of OFF interval. Through simulation, Our scheme improves bandwidth utilization.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.11
• /
• pp.943-954
• /
• 2000

Fieldbus is the lowest level industrial network in the communication hierarchy of factory automation and distributed process control systems. Data generated from field devices are largely divided into three categories : time-critical, periodic and time-available data. Because these data share one fieldbus medium, it needs a method that allocates these data to the bandwidth-limited fieldbus medium. This paper introduces an implementation method of bandwidth allocation scheme on PROFIBUS. In order to implement bandwidth allocation scheme on PROFIBUS, the following functions need to be supplemented on the FDL(Fieldbus Datalink Layer) protocol: (i) separation of medium bandwidth into periodic and non-periodic intervals, (ii) synchronization of node timers over a local link. In order to examine the validity of bandwidth allocation scheme on PROFIBUS, this paper develops an experimental model of a network system. The results obtained from the experimental model show that the bandwidth allocation scheme satisfies the performance requirement of time-critical, periodic and time-available data.