• Journal of Communications and Networks
• /
• v.7 no.2
• /
• pp.171-177
• /
• 2005

This paper addresses mobility management (MM) requirements and framework for systems beyond IMT-2000 (SBI2K), based on the standardization works that has so far been done in ITU-T study group 19. We first identify the requirements for MM in SBI2K. Based on the identified MM requirements, we describe the MM framework for location management and handover management for SBI2K. We then review and analyze some of the existing IP-based MM protocols. From the analysis and comparison, we see that the existing MM schemes cannot meet all of the MM requirements for SBI2K. It is naturally concluded that further work is needed to enhance the available MM schemes SBI2K.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 2003.10a
• /
• pp.162-163
• /
• 2003

The Eco-2 Project presents a win-win strategy for the environment and for the economy (ECO-2 is an abbreviation of Ecology and Economy), The project was initiated by the Korean Ministry of the Environment to promote the development of an environmental industry technology as a means of driving national development in this sector. Our project work belongs to the category of integrated environment management technology, and is described as a development and utilization of risk assessment and analysis system for integrated environmental management in municipal and industrial areas. The goal of our project is to develop available system software in health and ecological risk assessment and to offer it as Decision Support System (DSS) to aid the effective management of environmental risk in municipal and industrial areas in Korea.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.20
• /
• pp.343-365
• /
• 2003

Dispute plays a key role in maintaining the desirable performance of trade transaction. In an effort to stay competitive in a global marketplace, the Korean companies need to become more aware of alternatives to costly and time-consuming litigation. Korean companies, therefore, should be more concerned with ADR(Alternative Dispute Resolution) system and should utilize ADR to settle their disputes effectively and efficiently. ADR encompasses all process of dispute resolution as a substitute for the traditional litigation. Generally, three kinds of ADR are available in Korea: Negotiation, mediation, and arbitration. This article investigates reasons why ADR isn't used well in Korea and suggests ways how ADR can work best in international trade disputes. To expand ADR system in international trade disputes, it is very important for both the company and the scholar to recognize the concept and usefulness of ADR system. The Korean Commercial Arbitration Board also must help both Korean companies and scholars recognize the mechanism of dispute resolution and utilize ADR system in international trade disputes.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.12
• /
• pp.48-58
• /
• 2010

In this study, position tracking and force reflection control of a master-slave manipulator which will be used for handling objects contaminated by radioactivity has been addressed. Since available measurements concerning on dynamic motion of the master-slave manipulator are restricted, a simple constrained control structure was suggested. In the consideration of the uncertain dynamic behaviors of the slave manipulator which is dependent upon mass and shape of work pieces grasped and dynamic properties of the environment contacted, a simple structured sliding mode control was suggested to guarantee robustness with respect to parameter uncertainties and external disturbances. The proposed control was applied to a 1-DOF master-slave link system. The control performances were verified along with some computer simulation results.

• Journal of Environmental Impact Assessment
• /
• v.18 no.6
• /
• pp.419-427
• /
• 2009

Methodology and application of Strategic Environmental Assessment (SEA) for policies, plans, and programs are still new approach in Vietnam. With a support from Vietnam-Swedish Project (SEMLA) and Ministry of Natural Resources and Environment (MONRE), SEA for the Tonkin Gulf Coastal Economic Belt Development Plan was conducted in 2008. Lessons obtained from this SEA may contribute to improving methods and practicing SEAs for regional development. The main lessons summarized in this paper are: (i) close cooperation between the planning and environmental teams from the beginning phase of a master plan; (ii) SEA should focus not only on impacts to the natural environment but also on main issues of socio-economic aspects; (iii) approaches and methods used in SEA should be appropriate to properly predict the impacts at regional-levels and cumulative impacts; (iv) a good SEA study may be achieved when detailed data on the environment and socio-economy of the study area are available and have active engagement of stakeholders, including project affected sectors, ecologists, planners, policy makers, etc. This paper is useful for whom, those work in SEA in regional development.

• Journal of the Korean Society of Tobacco Science
• /
• v.25 no.2
• /
• pp.111-119
• /
• 2003

In this work, Rayon-based activated carbon fiber(KF-1500) was treated by HN $O_3$ and $H_2$S $O_4$ with different conditions. Specific surface areas(SSA, $S_{BET}$) of the treated activated carbon fibers were decreased by acidic treatment but, total surface acidities and surface functional groups were increased. In spite of the decrease of SSA, propylamin(PPA) adsorption and removal ability by activated carbon fiber(ACF) were increased by nitric acid treatment compared with the raw-ACF(KF-1500) and coconut based activated carbon. However, acidic treated activated carbon fibers were available to removal for various amines and contaminants by adsorption.n.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.572-577
• /
• 2011

A disc spring consists of a conical disc. A load-displacement formula was newly developed in the form of energy method to consider both rigid and friction. The cross section of the disc spring has identical slope angles at the bottom of conical. To solve such a problem, an energy method calculation is proposed. To achieve the goal of this study, the proposed calculation is extended to a disc spring with friction. A firm basis background study based on Almen's work is presented in developing a new numerical approach to predict the available formulation for a disc spring with friction.

• The Journal of Korean Medical History
• /
• v.14 no.2
• /
• pp.83-107
• /
• 2001

"Aheuichaulyo御醫撮要" was known to be published by Choi Jong-jun崔宗峻 in Korea高麗 Dynasty(A.D.1226), however its original copy is not available at the present. It was thought that Korean folk medicine and the remedies were recorded in this book, and these were recorded in "Euibangyoochui醫方類聚" published in Chosun朝鮮 dynasty(1445). "Euibangyoochui" is called a treasure-house of the knowledge of traditional oriental medicine which contains over 50,000 prescriptions and enormous amount of medical information. The restoration of "Aheuichaulyo" was possible during the process of establishment of data base work of "Euibangyoochui". "Aheuichaulyo" was restored as 132 chapters mainly from the related con tents of "Euibangyoochui" and partially from the contents of "Hyangyakjipsungbang鄕藥集成方" and "Boonmoononyukyihaebang分門瘟疫易解方" for the supplement.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.1011-1014
• /
• 2002

In order to reduce the lead-time and cost, many useful methods have been applied to Rapid Prototyping (RP) in recent years. But cutting process is still considered as one of the effective RP methods that have been developed and currently available in the industry. It also owen practical advantages such as precision and versatility. However, traditional 3 axis NC machining has some inherent limitations such as the restriction of tool accessibility and the complex setup. In this work, a new rapid prototyping system with high speed 5 axis machining has been developed to overcome those limitations. The architecture of developed system is described in detail and the successful application examples are presented.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.11a
• /
• pp.131-151
• /
• 2006

Rebuilding an existing paper machine is often a very profitable way for papermakers to increase the cash flow created by an older paper machine. Metso Paper has placed particular emphasis in recent years on developing concepts and products specifically for rebuild needs. The outcome of this work can now be seen as a wide selection of products offering quite possibly the best coverage of all time of specific improvement targets. Different needs can be addressed through truly different solutions. Selection the best-fit alternatives will offer great upgrade options for all paper machines and paper grades. Metso Paper's long experience with high-speed paper machines has been put to good use to create more cost-effective small and mid-sized solutions with the reliability and quality of bigger and faster paper machines. This paper has discussed some of the most interesting and latest configurations available today for paper machine and finishing area rebuilds.