• 부모자녀건강학회지
• /
• 제10권2호
• /
• pp.110-122
• /
• 2007

Purpose: The purpose of this study was to research the actual state of the toddler and preschooler safety seats built into the car. Method: The design was a descriptive study by questionnaire. Data were collected from August, 1, 2007 to September, 30, 2007. A total 232 toddler and preschooler parents in Seoul and Inchon. Data were analysed using SPSS WIN 12.0. Result: The study show that people who did not get a education are 86.2%. Using the child safety seats also show that 96.1% of respondents are holding in their arms, only 3.0% of respondents used them. 21.1% answered that they get on the vehicles with holding their children in their arms and 48.3% answered that they let their children alone on the seat, just 29.7% are using the child safety seats. Conclusion: To increase child safety seats configurations rate, available education is needed. For this, contents about child safety seats must be included for education leaving the hospital by nurses who work in nursery. For the consideration about child safety seats configuration rate, complement of the legal system and development of available protective equipment and economical support of the nation and the local community is needed.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2003년도 연료전지심포지움 2003논문집
• /
• pp.189-192
• /
• 2003

In this work, we have prepared platinum catalyst by various methods, investigated fuel cell performance and compared performance with commercially available $20\%$ Pt supported on carbon (Pt/C) catalyst. We have found that Pt/C prepared by reduction of chloroplatinic acid in mixed solvent (water+ethylene glycol) gives better performance compared to that produced by reduction of aqueous chloroplatinic acid, which can be attributed to smaller catalyst particle size and lower agglomeration in the mixed solvent. We have also prepared a novel platinum electrocatalyst by depositing platinum on Nafion coated carbon powder and it shows great promise. The performance of electrode prepared using $20\%Pt$ onn Nafion coated carbon mixed with Pt/C was found to be higher than the performance of electrodes using commercially available $20\%$ Pt/C, up to a current density of about $1100mA/cm^2$. The cell voltages obtained were respectively 621 and 603mV, at a current density of: $1000mA/cm^2$, in a single cell using $0.25mgPt/cm^2$ and Nafion 10035 membrane at $80^{\circ}C$ using hydrogen/oxygen reactants at 1 atm pressure.

• Journal of Information Processing Systems
• /
• 제8권3호
• /
• pp.399-408
• /
• 2012

Hand gesture recognition is an important area of research in the field of Human Computer Interaction (HCI). The geometric attributes of the hand play an important role in hand shape reconstruction and gesture recognition. That said, fingertips are one of the important attributes for the detection of hand gestures and can provide valuable information from hand images. Many methods are available in scientific literature for fingertips detection with an open hand but very poor results are available for fingertips detection when the hand is closed. This paper presents a new method for the detection of fingertips in a closed hand using the corner detection method and an advanced edge detection algorithm. It is important to note that the skin color segmentation methodology did not work for fingertips detection in a closed hand. Thus the proposed method applied Gabor filter techniques for the detection of edges and then applied the corner detection algorithm for the detection of fingertips through the edges. To check the accuracy of the method, this method was tested on a vast number of images taken with a webcam. The method resulted in a higher accuracy rate of detections from the images. The method was further implemented on video for testing its validity on real time image capturing. These closed hand fingertips detection would help in controlling an electro-mechanical robotic hand via hand gesture in a natural way.

• Journal of Electrical Engineering and Technology
• /
• 제13권3호
• /
• pp.1337-1345
• /
• 2018

The reliability of power transmission and distribution depends up on the consistency of insulation in the high voltage power transformer. In recent times, considering the drawbacks of conventional mineral oils such as poor biodegradability and poor fire safety level, several research works are being carried out on natural ester based nanofluids. Earlier research works show that sunflower oil has similar dielectric characteristics compared with mineral oil. BIOTEMP oil which is now commercially available in the market for transformers is based on sunflower oil. Addition of nanofillers in the base oil improves the dielectric characteristics of liquid insulation. Only few results are available in the literature about the insulation characteristics of nano modified natural esters. Hence understanding the influence of addition of nanofillers in the dielectric properties of sunflower oil and collecting the database is important. Considering these facts, present work contributes to investigate the important characteristics such as partial discharge, lightning impulse, breakdown strength, tandelta, volume resistivity, viscosity and thermal characteristics of $SiO_2$ nano modified sunflower oil with different wt% concentration of nano filler material varied from 0.01wt% to 0.1wt%. From the obtained results, nano modified sunflower oil shows better performance than virgin sunflower oil and hence it may be a suitable candidate for power transformer applications.

• 한국항행학회논문지
• /
• 제14권6호
• /
• pp.865-873
• /
• 2010

본 논문에서의 새로운 스케줄링은 모바일 간에 실시간으로 요구하는 모든 최소 가용 대역폭, 최대 지연 시간 그리고 다른 부수적인 조건들에 대해 QoS를 보장하는 핸드오버 요청들을 제공하기 위해 제안되었다. 입력으로는 모바일 스테이션이 서비스지역 이동간에서 발생하는 핸드오버 시간에 대한 예측이 필요하다. QoS와 핸드오버 시간을 알게 된 후, 목적지 기지국은 새로운 요청을 위한 핸드오버에 우선순위를 둔다. 그리고 이전의 리소스는 실제로 핸드오버 동안 사용할 수 있는 기회를 조금 더 가지게 된다.

• 대한임베디드공학회논문지
• /
• 제6권4호
• /
• pp.249-254
• /
• 2011

A user desktop service can be made available on internet or local area network with the help of virtualization and cloud technologies. The service is usually called a virtual desktop or a desktop cloud. However, a user interface is limited to I/O capabilities of a user's mobile terminal. In order to enhance a user interface on a remote virtual desktop, it is important to connect full-featured I/O devices which are founded locally. Our previous work called SoD (System-on- Demand) has proposed a technique to associate local full-featured I/O devices with a remote virtual desktop in Xen. On the technique, it is required to install a SoD client agent in a user's mobile terminal for connecting a remote virtual desktop. In this paper, we propose a new framework called Web-SoD that does not require any explicit installation to make SoD service available. The SoD client agent is provided by the web technology so that the agent can be installed transparently, and the platform independency is also achieved. Due to insufficient network socket performance of current web technologies, we extend Native Client (NaCl) proposed by Google to support a network functionality by modifying a NaCl library and a service runtime. With conducted experiment, we show that the network extension supports a full socket functionality over the compromised overhead on the web environment.

• Safety and Health at Work
• /
• 제10권2호
• /
• pp.166-171
• /
• 2019

Objective: This study explored personal protective equipment (PPE) availability and PPE utilization among interventionalists in the catheterization laboratory, which is a highly contextualized workplace. Methods: This is a cross-sectional study using mixed methods. Participants (108) completed a survey. A hyperlink was sent to the participants, or they were asked to complete a paper-based survey. Purposively selected participants (54) were selected for individual (30) or group (six) interviews. The interviews were conducted at conferences, or appointments were made to see the participants. Logistic regression analysis was performed. The qualitative data were analyzed thematically. Results: Lead glasses were consistently used 10.2% and never used 61.1% of the time. All forms of PPE were inconsistently used by 92.6% of participants. Women were 4.3 times more likely to report that PPE was not available. PPE compliance was related to fit and availability. Conclusions: PPE use was inconsistent and not always available. Improving the culture of radiation protection in catheterization laboratories is essential to improve PPE compliance with the aim of protecting patients and operators. This culture of radiation protection must include all those involved including the users of PPE and the administrators and managers who are responsible for supplying sufficient, appropriate, fitting PPE for all workers requiring such protection.

• 센서학회지
• /
• 제28권3호
• /
• pp.182-186
• /
• 2019

When a camera is employed for 3D sensing, accurate camera calibration is vital as it is a prerequisite for the subsequent steps of the sensing process. Camera calibration is usually performed by complex mathematical modeling and geometric analysis. On the other contrary, data learning using an artificial neural network can establish a transformation relation between the 3D space and the 2D camera image without explicit camera modeling. However, a neural network requires a large amount of accurate data for its learning. A significantly large amount of time and work using a precise system setup is needed to collect extensive data accurately in practice. In this study, we propose a two-step neural calibration method that is effective when only a small amount of learning data is available. In the first step, the camera projection transformation matrix is determined using the limited available data. In the second step, the transformation matrix is used for generating a large amount of synthetic data, and the neural network is trained using the generated data. Results of simulation study have shown that the proposed method as valid and effective.

• Wind and Structures
• /
• 제29권1호
• /
• pp.15-32
• /
• 2019

Much advancement has been made in wind power due to modern technological developments. The wind energy technology is the world's fastest-growing energy option. More power can be generated from wind energy by the use of new design and techniques of wind energy machines. The geographical areas with suitable wind speed are more favorable and preferred for wind power deployment over other sources of energy generation. Today's wind turbines are mainly the horizontal axis wind turbines (HAWTs) and vertical axis wind turbines (VAWTs). HAWTs are commercially available in various sizes starting from a few kilowatts to multi-megawatts and are suitable for almost all applications, including both onshore and offshore deployment. On the other hand, VAWTs finds their places in small and residential wind applications. The objective of the present work is to review the technological development, available sizes, efficiencies, structural types, and structural stability of VAWTs. Structural stability and efficiencies of the VAWTS are found to be dependent on the structural shape and size.

• Journal of Information Science Theory and Practice
• /
• 제9권1호
• /
• pp.54-67
• /
• 2021

This paper presents the ISRI (Information Systems Research Indicators) Web tool, publicly and freely available at isri.sciencesphere.org. Targeting Information Systems (IS) researchers, it compiles and organizes IS adoption and use theories/models, constructs, and indicators (measuring variables) available in the scientific literature. Aiming to support the IS theory development process, the purpose of ISRI is to gather and systematize information on research indicators to help researchers and practitioners' work. The tool currently covers eleven theories/models: DeLone and McLean's IS Success Model (D&M ISS); Diffusion of Innovations Theory (DOI); Motivational Model (MM); Social Cognitive Theory (SCT); Task-Technology Fit (TTF); Technology Acceptance Model (TAM); Technology-Organization-Environment Framework (TOE); Theory of Planned Behavior (TPB); Decomposed Theory of Planned Behavior (DTPB); Theory of Reasoned Action (TRA); and Unified Theory of Acceptance and Use of Technology (UTAUT). It also includes currently over 400 constructs, nearly 2,500 indicators, and about 60 application contexts related to the models. For the creation of the tool's database, nearly 580 references were used.