• International journal of advanced smart convergence
• /
• v.8 no.2
• /
• pp.30-38
• /
• 2019

Recently, the spread of personal mobility has been rapidly increasing due to the development of environmentally friendly alternative transportation means. In addition, the level of battery technology is also rapidly developing, accelerating the popularization of personal mobility. Such personal mobility has convenience of location transfer, amusement, and high portability compared to other transportation devices. Most personal mobility, however, is made up of small wheels, which cannot overcome obstacles such as rugged roads or obstacles on the road. In this paper, to solve these problems, we tried to devise a device that can easily overcome obstacles by combining wheels with small moving means. The wheel size can be mounted on the front wheel of the small moving means in a protruding manner so that obstacles can be encountered before the front wheels and the safety and ride comfort of the running can be improved.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.403-404
• /
• 2007

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.16 no.3
• /
• pp.188-196
• /
• 2016

For the balancing control of a one-wheel mobile robot, CMG (Control Moment Gyro) can be used as a gyroscopic actuator. Balancing control has to be done in the roll angle direction by an induced gyroscopic motion. Since the dedicated CMG cannot produce the rolling motion of the body directly, the yawing motion with the help of the frictional reaction can be used. The dynamic uncertainties including the chattering of the control input, disturbances, and vibration during the flipping control of the high rotating flywheel, however, cause ill effect on the balancing performance and even lead to the instability of the system. Fuzzy compensation is introduced as an auxiliary control method to prevent the robot from the failure due to leaning aside of the flywheel. Simulation studies are conducted to see the feasibility of the proposed control method. In addition, experimental studies are conducted for the verification of the proposed control.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1014-1019
• /
• 2005

In this paper, a neural network technique for automatic steering control of a four wheel drive autonomous highway snowplow vehicle is presented. Controllers are designed by the LQR method based on the vehicle model. Then, neural network is used as an auxiliary controller to minimize lateral tracking error under the presence of load. Simulation studies of LQR control and neural network control are conducted for the vehicle model under a virtual snowplowing situation. Tracking performances are also compared for two and four wheeled steering vehicles.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.543-547
• /
• 2005

In this paper, we designed a intelligent autonomous driving robot by using Fuzzy algorithm. The object of designed robot is recognition of obstacle, avoidance of obstacle and safe arrival. We append a suspension system to auxiliary wheel for improvement in stability and movement. The designed robot can arrive at destination where is wanted to go by the old and the weak and the handicapped at indoor hospital and building.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.142-147
• /
• 1988

Free-path-type guidance system does not need a hardwired path in the environment so that it gives a mobile robot a flexible path. ln this study to achieve the free-path-type guidance system for a mobile robot which is steered by the differential steering of both drive forewheels, position recognition systems are constructed using odometer system as an internal position sensor. Two odometer systems, a auxiliary wheel odometer and a 2-encoder odometer system are constructed and path following algorithms using these odometer systems are designed and experimented. PID control type is adopted in the path following algorithms.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.9 no.1
• /
• pp.1-9
• /
• 2015

This paper reviews trends of the rehabilitation welfare devices on the basis of products and markets. Latest assistive devices tend to have a fold function. Auxiliary power assist module has been added. The completion of products has been improved. The folding function has strong relationship with portability. Specifically, various mobility devices, including foldable devices, are associated with enhanced portability. Powered auxiliary wheels and upper extremity supporting modules have entered the market. The leading-edge technology like Segway's control technology applies to two-wheel wheelchairs. The brand- new technology, lower extremity robotic exoskeleton, applies to markets. Standing wheelchairs, ramps, stair climbing assistive devices becomes more common. In addition, a combination of a variety of smart devices is being promoted to the classical assistive devices' part. Rehabilitation welfare devices can be more valuable due to nice industrial design, improved materials, and processing technology.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.1
• /
• pp.1-7
• /
• 2013

An aerodynamic rig test of a radial turbine for an auxiliary power unit (APU) was performed at a high-temperature turbine test facility at the Korea Aerospace Research Institute. The pressure ratio, Mach number, and flow coefficient in the rig test are the same as those under normal engine operation conditions. The design pressure ratio is 3.096, design test speed is 34909 rpm, and turbine inlet temperature is $160^{\circ}C$. The turbine has airfoil-type nozzles, and the diameter of the turbine wheel is 175.74 mm. The turbine map is experimentally measured, and the detailed flow at the turbine inlet is measured. The pressure distribution in the nozzle at both the hub and the shroud sides and the pressure distribution along the shroud casing of the turbine wheel were measured, and this confirmed that the expansion process in the turbine wheel is acceptable.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.741-745
• /
• 2001

Reliability and safety of steer-by-wire concepts can be achieved by redundant designs. This paper discusses the design of a fault tolerant concept for a force feedback actuator with a standard three-phase PMSM. In contrast to usual drives, the phases of the machine are separated electrically. This design allows driving the machine with two instead of three phases in case of a fault. A superimposed torque controller adjusts the influence of fault currents and torque harmonics in two-phase operation and guarantees smooth torque at the steering wheel

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4B
• /
• pp.278-284
• /
• 2006

In thispaper, we designed a intelligent autonomous driving robot by using Fuzzy algorithm. The object of designed robot is recognition of obstacle, avoidance of obstacle and safe arrival. We append a suspension system to auxiliary wheel for improvement in stability and movement. The designed robot can arrive at destination where is wanted to go by the old and the weak and the handicapped at indoor hospital and building.