• International journal of advanced smart convergence
• /
• 제8권2호
• /
• pp.30-38
• /
• 2019

Recently, the spread of personal mobility has been rapidly increasing due to the development of environmentally friendly alternative transportation means. In addition, the level of battery technology is also rapidly developing, accelerating the popularization of personal mobility. Such personal mobility has convenience of location transfer, amusement, and high portability compared to other transportation devices. Most personal mobility, however, is made up of small wheels, which cannot overcome obstacles such as rugged roads or obstacles on the road. In this paper, to solve these problems, we tried to devise a device that can easily overcome obstacles by combining wheels with small moving means. The wheel size can be mounted on the front wheel of the small moving means in a protruding manner so that obstacles can be encountered before the front wheels and the safety and ride comfort of the running can be improved.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.403-404
• /
• 2007

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제16권3호
• /
• pp.188-196
• /
• 2016

For the balancing control of a one-wheel mobile robot, CMG (Control Moment Gyro) can be used as a gyroscopic actuator. Balancing control has to be done in the roll angle direction by an induced gyroscopic motion. Since the dedicated CMG cannot produce the rolling motion of the body directly, the yawing motion with the help of the frictional reaction can be used. The dynamic uncertainties including the chattering of the control input, disturbances, and vibration during the flipping control of the high rotating flywheel, however, cause ill effect on the balancing performance and even lead to the instability of the system. Fuzzy compensation is introduced as an auxiliary control method to prevent the robot from the failure due to leaning aside of the flywheel. Simulation studies are conducted to see the feasibility of the proposed control method. In addition, experimental studies are conducted for the verification of the proposed control.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1014-1019
• /
• 2005

In this paper, a neural network technique for automatic steering control of a four wheel drive autonomous highway snowplow vehicle is presented. Controllers are designed by the LQR method based on the vehicle model. Then, neural network is used as an auxiliary controller to minimize lateral tracking error under the presence of load. Simulation studies of LQR control and neural network control are conducted for the vehicle model under a virtual snowplowing situation. Tracking performances are also compared for two and four wheeled steering vehicles.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.543-547
• /
• 2005

In this paper, we designed a intelligent autonomous driving robot by using Fuzzy algorithm. The object of designed robot is recognition of obstacle, avoidance of obstacle and safe arrival. We append a suspension system to auxiliary wheel for improvement in stability and movement. The designed robot can arrive at destination where is wanted to go by the old and the weak and the handicapped at indoor hospital and building.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.142-147
• /
• 1988

Free-path-type guidance system does not need a hardwired path in the environment so that it gives a mobile robot a flexible path. ln this study to achieve the free-path-type guidance system for a mobile robot which is steered by the differential steering of both drive forewheels, position recognition systems are constructed using odometer system as an internal position sensor. Two odometer systems, a auxiliary wheel odometer and a 2-encoder odometer system are constructed and path following algorithms using these odometer systems are designed and experimented. PID control type is adopted in the path following algorithms.

• 재활복지공학회논문지
• /
• 제9권1호
• /
• pp.1-9
• /
• 2015

국외의 재활보조기기 추세를 분석하였다. 접어지는 기능이 강화되고, 기존의 동력이 없는 장치에 전동구동 보조모듈이 추가되고, 전반적인 보조기기의 완성도가 향상되고 있다. 특히, 접어지는 기능을 포함한 휴대 및 보관하기 용이한 이동 보조기기가 증가하고 있다. 동력 보조 휠 및 상지보조 모듈이 시장에 진입하고 있다. 상대적으로 성숙된 최신기술을 적용한 신개념의 휠체어가 시장이 나오고 있다. 최신 로봇기술을 응용한 하지 외골격 로봇이 경쟁체제에 돌입하였다. 기립형 휠체어, 경사로, 간단한 계단 이동보조장치가 보편화 되고 있다. 보조기기와 다양한 스마트기기가 결합되고 있다. 이외에도 멋진 디자인, 소재, 가공기술 등에 의한 완성도가 제고 되고 있다.

• 대한기계학회논문집B
• /
• 제37권1호
• /
• pp.1-7
• /
• 2013

본 연구는 보조동력장치에 적용되는 구심터빈의 공력성능시험을 한국항공우주연구원의 고온 터빈 시험리그에서 수행한 결과이다. 리그시험을 위하여 터빈의 형상은 동일하되 팽창비, 마하수 및 유량계수는 실제 엔진과 동일한 값이 되도록 상사법칙을 적용하여 시험하였다. 설계 팽창비는 3.096이며, 상사된 설계회전수는 34909 rpm이고 상사된 터빈 입구온도는 $160^{\circ}C$이다. 터빈의 입구에는 익형 형상의 노즐이 설치되었으며 터빈 휠의 직경은 175.74mm이다. 시험을 통하여 터빈의 성능지도가 생성되었으며 터빈 입구에서의 상세 유동이 측정되었다. 노즐의 허브면에서 측정한 압력과 노즐의 쉬라우드 면과 터빈 휠 케이싱에서 측정한 압력 분포를 볼 때 터빈 내부에서의 팽창과정이 적절함을 확인할 수 있었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.741-745
• /
• 2001

Reliability and safety of steer-by-wire concepts can be achieved by redundant designs. This paper discusses the design of a fault tolerant concept for a force feedback actuator with a standard three-phase PMSM. In contrast to usual drives, the phases of the machine are separated electrically. This design allows driving the machine with two instead of three phases in case of a fault. A superimposed torque controller adjusts the influence of fault currents and torque harmonics in two-phase operation and guarantees smooth torque at the steering wheel

• 한국통신학회논문지
• /
• 제31권4B호
• /
• pp.278-284
• /
• 2006

본 논문에서는 퍼지 알고리즘을 사용하여 지능형 자율주행로봇을 설계하였다. 설계된 로봇은 이동시 장애물을 인식하여 이를 회피하며 안전하게 도달하는데 목적이 있다. 또한 로봇의 이동에 있어서 로봇의 안정성과 주행성의 성능을 높이기 위해 보조 바퀴에 서스펜션을 장착하였다. 이렇게 설계된 지능형 자율주행로봇은 병원이나 빌딩내부의 좁은 실내에서 노약자나 장애인이 원하는 목적지 까지 안전하게 갈수 있다.