• 한국철도학회논문집
• /
• 제20권3호
• /
• pp.339-348
• /
• 2017

철도차량용 전원창치는 추진제어용 전원장치와 보조전원장치로 구분된다. 추진제어용 전원장치는 철도차량의 추진 및 회생제동 등의 동작을 위한 것이며, 보조전원장치는 추진제어용 전원을 제외한 공기압축기, 조명기기, 차량제어전원 등의 보조전원에 사용되는 것이다. 각 전원장치는 고전압, 고전류 사양 특성에 따라 일반적으로 insulated-gate bipolar transistor (IGBT)를 스위칭 소자로 사용하고 있다. 스위칭 소자를 사용하기 위해서는 적절한 스위칭 동작을 구현하기 위한 구동회로(Gate Driver Unit, GDU)가 필수적이다. 본 논문에서는 철도차량에 적용되고 있는 IGBT용 GDU에 적용되고 있는 기술 동향을 분석하고 철도차량용 IGBT GDU 설계 시 고려사항에 대해 알아보고자 한다.

• 드라이브 ㆍ 컨트롤
• /
• 제10권2호
• /
• pp.1-6
• /
• 2013

This study describes a method which can attenuate reaction force effectively for an air spring system composed of an air spring and auxiliary chamber. For the analysis, the nonlinear governing equation of the air spring system is derived. For a performance improvement of the system, change of the heat transfer effect and the mass flow rates is included in the analysis of the air spring system. The simulation study is presented to show the reaction force is changed by variations in heat transfer characteristics and the air spring system of isothermal process has the best performance. As a result, to improve attenuation characteristics of reaction force, a process in the air spring system should be maintained near isothermal process.

• Journal of Electrical Engineering and Technology
• /
• 제3권1호
• /
• pp.8-13
• /
• 2008

Because of the robust nonlinear characteristics appearing in today's modern power system, a strong interaction exists between the angle stability and the voltage stability, which were conventionally studied insularly. However, as the power system is a complex unified system, angle instability always happens in conjunction with voltage instability. The authors propose a novel method to analyze this type of stability problem. In the proposed method, the theory of normal forms of vector fields is utilized to treat the auxiliary dynamic system. By use of this method, the interaction between response modes caused by the nonlinearity of the power system can be analyzed. Consequently, the eigenvalue analysis method is extended to cope with performance analysis of the power system with heavy nonlinearity. The effectiveness of the proposed methodology is verified on a 3-bus power system.

• 한국안전학회지
• /
• 제31권6호
• /
• pp.129-134
• /
• 2016

Standard design of APR+(advanced power reactor plus) was certified at 2014 by Korea regulatory body. Based on the experience gained from OPR1000 and APR1400, the APR1400 was being developed as a 1,500MWe class reactor using Korean technologies for design code, reactor coolant pump, and man-machine interface system. APR+ has been basically designed to have the seismic design basis of safe shutdown earthquake (SSE) 0.3g, a 4-train safety concept based on N+2 design philosophy, and a passive auxiliary feedwater system (PAFS). Also, safety issues on the Fukushima-type accidents have been extensively reviewed and applied to enhance APR+ safety. APR+ provides higher reliability and safety against tsunami and earthquake. The purpose of this paper is to implement probabilistic safety assessment considering these design features and to analyze sensitivity of core damage frequency for large loss of coolant accident of APR+.

• 동력기계공학회지
• /
• 제8권3호
• /
• pp.58-66
• /
• 2004

The sway motion control problem of a container hanging on the trolly is considered in the paper. In the container crane control problem, suppressing the residual swing motion of the container at the end of acceleration, deceleration or the case of that the unexpected disturbance input exists is main issue. For this problem, in general, many trolley motion control strategies are introduced and applied. In this paper, we introduce and synthesize a swing motion control system in which a small auxiliary mass is installed on the spreader made by ourselves. In this control system, the actuator reacting against the auxiliary mass applies inertial control forces to the container to reduce the swing motion in the desired manner. Especially, we apply the $H_{\infty}$ based gain-scheduling control technique the anti-sway control system design problem of the controlled plant. In this control system, the controller dynamics are adjusted in real-time according to time-varying plant parameters. And the simulation result shows that the proposed control strategy is shown to be useful to the case of time-varying system and, robust to disturbances like winds and initial sway motion.

• 해양환경안전학회지
• /
• 제19권1호
• /
• pp.66-70
• /
• 2013

전기추진선박의 추진시스템에 주로 사용되는 3상 정류기의 입력전류는 다양한 저차 고조파를 포함하고 있다. 이러한 고조파 저감을 위해서 대전력이 필요한 대형 선박에 사용되는 전력변환장치는 12펄스 출력의 정류기가 현재 사용되고 있지만 여전히 $12{\pm}1$차의 고조파가 발생되는 문제점이 있다. 또한, 속도 및 토크 제어기법으로 널리 사용되고 있는 직접토크제어기법의 경우에는 토크 리플이 심하고 전동기의 입력전류는 인버터의 스위칭에 의해 고조파를 크게 포함하고 있다. 본 연구에서는 직접토크제어기법을 이용하는 전기추진시스템의 12펄스 정류기에 보조 전원을 공급하여 고조파를 저감하고 토크 제어성능을 향상시켰으며 실선시스템 환경에서 시뮬레이션을 통해 그 유효성을 입증하였다.

• 한국추진공학회지
• /
• 제11권3호
• /
• pp.20-28
• /
• 2007

압축기의 써지 현상을 관찰하는 가장 쉬운 방법의 하나로는 부분품의 성능특성도상에 정적 그리고 동적 운용 특성을 나타내는 것이 될 수 있다. 이 경우 엔진의 작동범위가 써지 범위에 의하여 제한될 것이고 따라서 엔진은 엔진의 정적 또는 과도 성능의 전 과정에 걸쳐 일정한 써지 한계를 갖도록 요구되고 있다. 로터의 극관성 모멘트, 닥트 내 공기/가스의 용적 그리고 열전달 효과 등은 엔진의 작동이 정적 특성으로부터 일탈하게 되는 주요 요소들이다. 시스템 내에서 열교환기가 존재하는 경우처럼 큰 용적의 경우 그것은 동적 작동 특성에 상당한 영향을 주게 될 것인데 본 논문에서는 보조동력기관으로 사용되는 마이크로터빈의 예를 들어 엔진의 과도성능 특성에 압축기의 출구에서 추출되는 냉각공기가 미치는 영향을 조사코자 하였다. 질량 및 일 그리고 회전수 일치 법칙에 근거하여 터빈을 흐르는 가스 유량, 압력비, 회전 속도, 동력 그리고 모멘트가 계산되었다. 본 연구의 결과는 제어시스템 설계를 위한 기초 자료로 활용될 수 있을 것이다. 이러한 과도 성능을 계산하기 위한 프로그램을 개발을 위해서 상업용 MathCAD 소프트웨어를 사용하였다.

• 전력전자학회논문지
• /
• 제25권6호
• /
• pp.503-510
• /
• 2020

The importance of DC breakers as key protection equipment is increasing in accordance with growing concerns on MVDC distribution network systems without DC/AC conversion. Different from the situation in AC systems, no natural zero-crossing point exists in DC systems. Thus, DC breaker technology is more difficult than AC breaker technology. The solutions for DC breakers can be divided into three types: mechanical, power electronics, and hybrid. In this study, the operating principles of several topologies of hybrid circuit breakers and that of the proposed DC breaker are analyzed and simulated by sorting two types. The breakers are compared in terms of the type and number of semiconductors, volume, power loss, auxiliary components, isolation, and other aspects. The advantages and disadvantages of the breakers are also analyzed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.87-89
• /
• 2005

This paper proposes new series and parallel Sin+Cos PSS(power system stabilizer) for the purpose to improve the existing PSS1A's performance. The purpose of PSS is used to enhance damping of power system oscillations through injection of auxiliary signal for an excitation control terminal. The Proposed series and Parallel Sin+Cos PSS is connected adding the Sin+Cos terms additionally with serial and with parallel connection in a conventional PSS1A. The proposed controller is aim to considering of a damping of oscillation when it changes parameter fluctuations or operational load variations in a power system. The object of electric power system is KEPCO system and the voltage of power transmission line is a 154kV and a 345kV. The PSCAD/EMTDC package is used to authorize the effect of the proposed controller. Simulations were shown by and compared with the waveforms for frequency, voltage and electric power.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집
• /
• pp.33-37
• /
• 2004

Photovoltaic energy and wind energy are highly dependent on the season, time and extremely intermittent energy sources. Because of these reasons, in view of the reliability the photovoltaic and the wind power generation system have many problems(energy conversion, energy storage, load control etc.) comparing with conventional power plant. In order to solve these existing problems, hybrid generation system composed of photovoltaic(500W) and wind power system(400W) was suggested But, hybrid generation system cannot always generate stable output due to the varying weather condition So, the auxiliary power compensation unit that uses elastic energy of spiral spring was added to hybrid generation system for the present study. It was partly confirmed that hybrid generation system was generated a stable outputs by spiral spring was continuously provided to load.