• Bulletin of the Korean Chemical Society
• /
• 제35권5호
• /
• pp.1305-1311
• /
• 2014

The nickel oxide, the most widely used cathode material for the molten carbonate fuel cell (MCFC), has several disadvantages including NiO dissolution, poor mechanical strength, and corrosion phenomena during MCFC operation. The surface modification of NiO with lanthanum maintains the advantages, such as performance and stability, and suppresses the disadvantages of NiO cathode because the modification results in the formation of $LaNiO_3$ phase which has high conductivity, stability, and catalytic activity. As a result, La-modified NiO cathode shows low NiO dissolution, high degree of lithiation, and mechanical strength, and high cell performance and catalytic activity in comparison with the pristine NiO. These enhanced physico-chemical and electrochemical properties and the durability in marine environment allow MCFC to marine application as a auxiliary propulsion system.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권6호
• /
• pp.854-861
• /
• 1998

The demand of LNG as a cheap and clean energy which does not cause an environmental problem has sharply been increased in Korea. In general LNG is stored in a cargo tank specially designed as a liquid state below $-162^{\circ}C$. The main engine of a LNG carrier is generally a steam boiler because LNG is a highly flammable fluid with the possibility of explosion. The main engine of a cargo ship has to be capable of the propulsion load and various auxiliary loads for the safe navigation since it is the primary energy source. Therefore the evaluation of a main boiler's energy capacity is a key design point in the planning of LNG carrier's construction. This research is to develop the computational program for the analysis of steam boiler Heat balance for LNG carrier.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.294-297
• /
• 2014

A Shipboard power system consists of three or four diesel generator sets connected to a grid. In case of dual fuel diesel generator sets employed LNG ship as a prime mover, large amounts of electricity are required for electric propulsion, auxiliary machinery and accommodation facilities. The electrical connection between generators through a network, torsional vibration can lead power swings. In this paper, the influence on the network by the torsional vibration of diesel generator sets in grid operation were studied. The torsional vibration characteristics were investigated and analyzed through theoretical analysis and the vibration measurement and the results were presented.

• 한국IT서비스학회지
• /
• 제12권2호
• /
• pp.335-348
• /
• 2013

Vessel PMS (Planned Maintenance System) is a paper and/or software based system to monitor vessel engine equipment including main propulsion, steering, auxiliary machinery and cargo handling information. This is one of mandatory survey for vessel introduced by IMO (International Maritime Organization). The planned maintenance as well as documentation must be performed according to a system to be approved by classification agencies. Recently, vessel owners have preferred software based systems to collect and preserve accurate data. However, not ship specific and not taking into account the user are said by end users as operational difficulties. To relieve these concerns, this research analyzes vessel PMS data, suggests a middleware to support automatic collection and design consideration of user interface.

• 전기학회논문지P
• /
• 제56권1호
• /
• pp.6-12
• /
• 2007

In this paper, an robust adaptive backstepping controller is proposed for the speed control of separately excited DC motor in pure electric vehicles. A general electric drive train of PEV is conceptually rearrange to major subsystems as electric propulsion, energy source, and auxiliary subsystem and the load torque is modeled by considering the aerodynamic, rolling resistance and grading resistance. Armature and field resistance, damping coefficient and load torque are considered as uncertainties and noise generated at applying load torque to motor is also considered. It shows that the backstepping algorithm can be used to solve the problems of nonlinear system very well and robust controller can be designed without the variation of adaptive law. Simulation results are provided to demonstrate the effectiveness of the proposed controller.

• 해양환경안전학회지
• /
• 제24권6호
• /
• pp.810-817
• /
• 2018

우리나라에서 다랑어 선망어업은 국내 원양산업 중 업종별 생산량 1위의 업종으로, 1980년대 중 후반부터 연구가 지속적으로 수행되어왔으며, 기술의 현대화 연구가 활발히 진행되어왔다. 하지만, 어선에 탑재되는 보조작업선들은 원양어업에서 중요한 역할을 맡고 있음에도 관련 연구가 미흡한 실정이다. 이에 본 연구에서는 보조작업선들 중 네트보트의 추진기를 프로펠러에서 워터제트 형태로 변경하고, 그에 따른 선형 변환을 통한 선체 부가저항 감소 및 운항성능을 향상하고자 하였다. 이를 위해 전산수치해석을 통해서 선박의 유체성능 변화를 계산하였으며, 또한 기존 선형 및 추진기 변화 선형에 대해 모형선 수조시험을 수행하여 속도별 저항성능 비교를 수행하였다. 수치해석 및 1/7의 축소모형의 수조시험 결과, 기존의 네트보트 대비 45~58 % 저항성능이 크게 향상되었으며, 이는 철망 제거에 의한 단순 침수표면적 및 선형개선에 의한 저항성능 향상을 확인하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.159-162
• /
• 2008

발사체의 상단에 사용되는 여러 가지 싸이클의 특성을 조사한 뒤, 그 중 가스발생기 후연소 싸이클 엔진의 특성을 살펴보았다. 발사체 상단에 사용되는 엔진은 추진제와 싸이클의 특성상 연소압-확장비 다이어그램에서 크게 3그룹으로 나뉘어 진다. 영역 II에 위치한 케로신 엔진은 모두 가스발생기 후연소 싸이클 엔진으로서 높은 압력과 복잡한 구조를 하고 있다. 이 싸이클은 그 특성상 2개 이상의 펌프를 사용한다. 즉, 연료라인을 둘로 분기하여 보다 높은 압력이 요구되는 가스발생기 라인에는 2차 펌프를 두어 좀 더 가압을 하여 보다 효율적인 파워사용이 가능하다. 기본적으로 모든 산화제는 가스발생기를 지나 연소기로 향하기 때문에 2차 펌프의 필요성이 줄어들지만 여러가지 이유로 주펌프 이전에 부스터 펌프를 두어 주산화제 펌프의 부담을 덜어주는 경우가 많다. 폐쇄형 엔진은 그 특성상 엔진 비추력 효율이 개방형 엔진보다 상대적으로 높기 때문에 상단엔진에 적합하다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권6호
• /
• pp.843-851
• /
• 2009

Much work has already been done to control and regulate the worldwide problems caused by climate change, particularly the issues on greenhouse gas (GHG) emissions. Carbon dioxide ($CO_2$), having the highest form of concentration among GHGs composed around 1.0 billion tons of emission, and comprises about 98% of the total emissions from the shipping industry. Korean trade mainly rely on the sea transportation. Korean ship tonnages that was brought about by shipbuilders all over the country, continues to grow annually due to the prevailing demands on goods or material supplies and depicting only a small part of the global maritime activity. Nowadays, new build ships coming from the Korean Shipbuilders are being optimized by hull, structure and appendages design, The operational capability of the propulsion and auxiliary machineries in its maximum capacity to achieve the highest possible efficiencies for energy and onboard power use to mitigate $CO_2$ emissions are continually being done through the help of research and development. In this paper, the energy efficiency design index and anboard power capacity of Korean new build ships have been analyzed with response to data collected by ship types, and its respective fuel consumption in relation to $CO_2$ emission results. In response to climate change convention outcome proposals, the best way for the new build ships to become energy efficient is by lowering its operational speed thru adopting the state of the art diesel propulsion engines, patronizing the best sailing practice to lower the transportation cost on the different sea trade routes also helps in $CO_2$ mitigation.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.848-853
• /
• 2004

Regarding to the project SUAV (Smart Unmanned Aerial Vehicle) in KARI (Korea Aerospace Research Institute), several engine configurations has been evaluated. However it's not an easy task to collect all the necessary data of each engine for the analysis. Usually, some kind of modeling technique is required in order to determine the unknown data. In the present paper a qualitative method for reverse engineering is proposed, in order to identify some design patterns and relationships between parameters. The method can be used to estimate several parameters that usually are not provided by the manufacturer. The method consists of modeling an existing engine and through a simulation, compare its transient behavior with its operating envelope. In the simulation several parameters such as thermodynamics, performance, safety and mechanics concerning to the definition of operation-envelope, have been discussed qualitatively. With the model, all engine parameters can be estimated with acceptable accuracy, making possible the study of dependencies among different parameters such as power-turbine total inertia, TIT, take-off time and part load, in order to check if the engine transient performance is within the design criteria. For more realistic approach and more detailed design requirements, it will be necessary to enhance the compressor map first, and more realistic estimated values must be taken into account for intake-loss, bleed-air and auxiliary power extraction. The relative importance of these “unknown” parameters must be evaluated using sensitivity analysis in the future evaluation. Moreover, fluid dynamics, thermal analysis and stress analysis necessary for the resulting life assessment of en engine, will not be addressed here but in a future paper. With the methodology presented in the paper was possible to infer the relationships between operation-envelope and engine parameters.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.518-523
• /
• 2008

경부고속열차(KTX) 차량컴퓨터제어장치(OBCS : On Board Computer System)는 네트워크 통신을 이용하여 차량내 각 종 전장품의 동작상태 감시와 운행명령 및 열차제어, 차량의 유지보수, 승무원의 운전업무를 지원하는 장치로써 KTX의 핵심장치이다. 이 장치는 TGV 제작사양과 프랑스의 고속열차 운영방식에 종속되어 특화된 시스템으로 제작되었으므로 실질적인 기술이전이 어려운 상태이다. 그렇기때문에 KTX 국내도입 후 운영상 요구되는 기능개선 및 자체적인 유지보수, 각 종 전장품(추진제어장치, 보조전원장치, 출입문제어장치 등)의 국산화 교체시 대부분의 인터페이스 신호가 차량컴퓨터제어장치(OBCS)와 연계되어 있어 많은 어려움이 수반되고 있다. 따라서 본 연구에서는 KTX 차량컴퓨터제어장치의 기능분석 및 주변장치(기관사 콘솔, 여객정보시스템, 고장현시장치, 각종 전장품 등)와의 상호 인터페이스 정보분석을 통해 KTX-OBCS 국산화 개발을 함으로써 KTX 운영상 요구되는 기능개선 및 유지보수 효율화에 기여하고, 더 나아가 고속열차제어 및 전장품 분야에서 선진 외국기술의 종속을 탈피하여 기술자립화를 이루고자 한다.