• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.8
• /
• pp.1077-1085
• /
• 2020

In order to Mine Countermeasure (MCM), the search is carried out for the expected mine zone. At this time, mine hunting uses Autonomous Unmanned Vehicle(AUV), taking into account the danger of mine and the stability of our forces. Sonar system for identifying buried mines are equipped with Side Scan Sonar(SSS) or Synthetic Aperture Sonar(SAS). This paper describes the analysis of mine hunting effects according to the commercial SSS characteristics. Based on the characteristics of each SSS, the insonified area and recognition probability were modeled, and the analysis was performed according to the search pattern of the AUV. AUV's search pattern defines three patterns depending on the presence or absence of SSS or shaded areas. The analysis results derived search time and detection probability for each search pattern, and finally, the improvement of search depending on the presence or absence of side injection or shaded area.

• The Journal of Korea Robotics Society
• /
• v.11 no.2
• /
• pp.51-59
• /
• 2016

In this paper we present (1) analysis of imaging sonar measurement for two-view relative pose estimation of an autonomous vehicle and (2) bundle adjustment and 3D reconstruction method using imaging sonar. Sonar has been a popular sensor for underwater application due to its robustness to water turbidity and visibility in water medium. While vision based motion estimation has been applied to many ground vehicles for motion estimation and 3D reconstruction, imaging sonar addresses challenges in relative sensor frame motion. We focus on the fact that the sonar measurement inherently poses ambiguity in its measurement. This paper illustrates the source of the ambiguity in sonar measurements and summarizes assumptions for sonar based robot navigation. For validation, we synthetically generated underwater seafloor with varying complexity to analyze the error in the motion estimation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.4 no.1
• /
• pp.179-189
• /
• 2000

Recently, due to the increasing interests in deep sea development, all possible efforts to the development of underwater unmanned working vehicles such as AUV(Autonomous Underwater Vehicle) or underwater robot are exerted. This paper proposes a new efficient acoustic-based underwater image data communication system, which ensures a certain level of maximum throughput regardless of the propagation delay of ultrasonic and allowsfast data transmission through the multiple ultrasonic communication channel. Proposed system consists of an acoustic transducer which operates at 136kHz center frequency and it's 10kHz bandwidth, pre-amplifier, $\pi/4 QPSK$(Quadrature Phase Shift Keying) modulation/demodu-lation method, image compressing method using JPEG technique and modified Stop & Wait protocol. The experimental result of the system make it possible to transfer the underwater image as a high throughput at the basin test. The results of test are also verified which allows to desirable transmission performance compared with the existing developed system and the possibility to put the practical use of survey and investigation in the water.

• The KSFM Journal of Fluid Machinery
• /
• v.17 no.4
• /
• pp.59-70
• /
• 2014

The motion of birds and insects have been studied and applied to MAV(Micro Air Vehicle) and AUV(Autonomous Underwater Vehicle). Most of AUV research is focused on shape and motion of single hydrofoil. However, double hydrofoil system is mostly used in real physics. This system shows completely different hydrodynamic characteristic to single hydrofoil because of wake interaction. The goal of this study is define the trajectory of wake interaction in double hydrofoil system. Moreover, trust and efficiency of various combined motion will be demonstrated. Symmetry airfoil is used for analysis an hydrodynamic characteristic. Forward wing's plunging and pitching motion is fixed, hide wing's Heaving ratio, Pitch phase shift from forward plunging and Heaving shift is changed. This study provide necessary basic data of motion optimization for double hydrofoil system.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.3
• /
• pp.124-131
• /
• 2011

There are many researches in unmanned vehicles such as UGV(Unmanned Ground Vehicle), AUV(Autonomous Underwater Vehicle). In these researches, differential wheeled mobile robots are mainly used to develop the experimental stage algorithm because of the simplicity of modeling and control. Usually a commercial product used in the study, but in order to operate a commercial product to the restrictions because there would need to use a fixed protocol. Using the microprocessor makes the internal sensors(encoder and INS) and external sensors(ultrasonic sensors, infrared sensors) operate and to determine commands for robot operation. This paper propose a mobile robot design for suitable purpose.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.2
• /
• pp.168-177
• /
• 2019

KRISO (Korea Research Institute of Ship & Ocean Engineering) started a project to develop the core algorithms for autonomous intervention using an underwater robot in 2017. This paper introduces the development of the robot platform for the core algorithms, which is an ROV (Remotely Operated Vehicle) type with one 7-function manipulator. Before the detailed design of the robot platform, the 7E-MINI arm of the ECA Group was selected as the manipulator. It is an electrical type, with a weight of 51 kg in air (30 kg in water) and a full reach of 1.4 m. To design a platform with a small size and light weight to fit in a water tank, the medium-size manipulator was placed on the center of platform, and the structural analysis of the body frame was conducted by ABAQUS. The robot had an IMU (Inertial Measurement Unit), a DVL (Doppler Velocity Log), and a depth sensor for measuring the underwater position and attitude. To control the robot motion, eight thrusters were installed, four for vertical and the rest for horizontal motion. The operation system was composed of an on-board control station and operation S/W. The former included devices such as a 300 VDC power supplier, Fiber-Optic (F/O) to Ethernet communication converter, and main control PC. The latter was developed using an ROS (Robot Operation System) based on Linux. The basic performance of the manufactured robot platform was verified through a water tank test, where the robot was manually operated using a joystick, and the robot motion and attitude variation that resulted from the manipulator movement were closely observed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.414-419
• /
• 2010

This paper describes the design and performance of a hovering AUV 'NOAH' constructed at Jeju National University. We analyse the dynamic performance of NOAH using simulation program and carry out depth control test at small basin. The main purpose of NOAH is to carry out fundamental tests on its attitude control and position control. Its configuration is similar to general ROV appearance for underwater works and dimension is $0.75m{\times}0.5m{\times}0.5m$. It has 4 thrusters of 450watt for longitudinal/lateral/vertical propulsion and is equipped with a pressure sensor for measuring water depth and a magnetic compass for measuring heading angle. The navigation of the vehicle is controlled by an on-board Pentium III-class computer, which runs with the help of the Windows XP operating system. These give us an ideal environment for developing various algorithm which are needed for developing and advanced hovering AUV.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.701-704
• /
• 2010

In studying an autonomous navigation technique of UUV(Unmaned Underwater Vehicle), one of the many fundamental techniques is to plan a 3D path to complete the mission via realtime information received by sonar showing landscapes and obstacles. The simulation system is necessary to verify the algorithm in researching and developing 3D path planning of UUV. It is because 3D path planning of UUV should consider guide control, the dynamics, ocean environment, and search sonar models on the basis of obstacle avoidance technique. The simulation system developed in this paper visualizes the UUV's movement of avoiding obstacles, arriving at the goal position via waypoints by using C++ and OpenGL. Plus, it enables the user to setup the various underwater environment and obstacles by a user interface. It also provides a generalization that can verify path planning algorithm of UUV studied in any developing environment.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.48 no.6
• /
• pp.88-96
• /
• 2011

Underwater acoustic communication is applicable in various areas, such as ocean data collection, undersea exploration and development, tactical surveillance, etc. Thus, robot control system construction used for underwater-robot like AUV or ROV is essential in these areas. In this paper, we propose the Message Merging MAC($M^2$-MAC) protocol, which is suitable for real time robot control system, considering energy efficiency in important parts of underwater acoustic sensor network constitution. In this proposed MAC protocol, gateway node receives the data from robot nodes according to the time slots that were allotted previously. And messages delivered from base-station are generated to one MAC frame by buffering process. Finally, generated MAC frames are broadcasted to all robot nodes in the cluster. Our suggested MAC protocol can also be hybrid MAC protocol, which is successful blend of contention based and contention-free based protocol through relevant procedure with Maintenance&Sleep (M&S) period, when new nodes join and leave as an orphan. We propose mathematical analysis model concerned about End-to-End delay and energy consumption, which is important factor in constructing real-time robot control system. We also verify the excellence of performance according to comparison of existing MAC protocols with our scheme.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.187-187
• /
• 2022

최근 선박의 자율운항기술이 활발하게 연구되어 오면서, 경로추종 제어 및 충돌회피 등의 자율운항 기술 연구가 많이 진행되고 있으며 그에 따른 시뮬레이션과 실해역 시험 등도 활발하게 수행되고 있다. 이러한 자율운항기술 중 본 연구에서는 AUV(Autonomous Underwater Vehicle) 진회수 시 모함에 활용되며 쌍동선형을 갖는 쌍동형 무인수상선을 대상으로 경로추종 제어에 대한 실해역 시험을 수행한 내용을 소개한다. 대상선인 쌍동형 무인수상선은 배수량이 약 10ton, 최대속도 10knots를 기준으로 설계된 선형이며 Sail drive 타입의 쌍축 추진기를 탑재하고 있으며 Fig. 1에 나타내었다. 실해역 시험은 경기도 화성시에 위치한 제부마리나 전면 해역에서 여러 속도에 대해 Fig. 2의 경로(빨간색)를 활용하여 수행되었다. 해당 경로는 변침각이 45도까지 이루어져 있다. 경로추종 제어 알고리즘은 목표경유점을 향하기 위해 선수각을 제어하는 부분과 목표속도로 추진하기 위해 속도를 제어하는 부분으로 나뉘어져 있다. 선수각 제어 시 경로와 무인선과의 위치 오차를 줄이는 방향으로 선수각이 향할 수 있도록 알고리즘이 설계되었다. 속도 제어의 경우 RPM 별로 실제 속도를 계측하여 데이터화 한 후, 실제 속도가 명령 속도와 다를 경우 RPM을 가감하여 명령 속도로 추진하기 위해 제어할 수 있도록 하였다. Fig. 2에서 파란색 선은 설계한 알고리즘을 활용하여 경로추종 제어를 한 결과의 궤적을 보여준다.