• 한국산학기술학회논문지
• /
• 제20권10호
• /
• pp.326-331
• /
• 2019

실제 환경에서는 움직이지 않는 정적 물체만큼이나 많은 수의 움직이는 동적 물체가 존재한다. 사람은 정적 물체와 동적 물체를 쉽게 구분할 수 있지만, 자율 주행 차량이나 모바일 로봇은 이를 구분하지 못한다. 따라서 차량이나 로봇이 성공적이고 안정적인 자율 주행을 수행하기 위해서는 정적 물체와 동적 물체를 정확하게 구분하는 것이 중요하다. 이를 수행하기 위해서 자율 주행 차량이나 모바일 로봇은 카메라, 라이다 등과 같은 다양한 센서 시스템을 활용할 수 있다. 그중에서 스테레오 카메라 영상은 자율 주행을 위해 많이 활용하는 데이터이다. 스테레오 카메라 영상은 물체 분할, 분류, 추적과 같은 물체 인식 분야는 물론 3차원 지도 복원과 같은 네비게이션 분야에 활용할 수 있다. 본 연구에서는 실시간으로 주행하는 차량과 로봇을 위하여 스테레오 영상을 활용한 정적/동적 물체 구분 방법을 제안하고, 향후 네비게이션 목적으로도 활용할 수 있도록 3차원 지도를 복원하여 이를 적용한 결과 및 성능 확인을 위한 정확도 분석 결과(99.81%)를 제시한다.

• 자동차안전학회지
• /
• 제14권1호
• /
• pp.20-25
• /
• 2022

This paper presents a development of simulation environment for validation of autonomous driving (AD) algorithm based on Robot Operating System (ROS). ROS is one of the commonly-used frameworks utilized to control autonomous vehicles. For the evaluation of AD algorithm, a 3D autonomous driving simulator has been developed based on LGSVL. Two additional sensors are implemented in the simulation vehicle. First, Lidar sensor is mounted on the ego vehicle for real-time driving environment perception. Second, GPS sensor is equipped to estimate ego vehicle's position. With the vehicle sensor configuration in the simulation, the AD algorithm can predict the local environment and determine control commands with motion planning. The simulation environment has been evaluated with lane changing and keeping scenarios. The simulation results show that the proposed 3D simulator can successfully imitate the operation of a real-world vehicle.

• 자동차안전학회지
• /
• 제13권4호
• /
• pp.14-19
• /
• 2021

This paper presents LiDAR static obstacle map based vehicle dynamic state estimation algorithm for urban autonomous driving. In an autonomous driving, state estimation of host vehicle is important for accurate prediction of ego motion and perceived object. Therefore, in a situation in which noise exists in the control input of the vehicle, state estimation using sensor such as LiDAR and vision is required. However, it is difficult to obtain a measurement for the vehicle state because the recognition sensor of autonomous vehicle perceives including a dynamic object. The proposed algorithm consists of two parts. First, a Bayesian rule-based static obstacle map is constructed using continuous LiDAR point cloud input. Second, vehicle odometry during the time interval is calculated by matching the static obstacle map using Normal Distribution Transformation (NDT) method. And the velocity and yaw rate of vehicle are estimated based on the Extended Kalman Filter (EKF) using vehicle odometry as measurement. The proposed algorithm is implemented in the Linux Robot Operating System (ROS) environment, and is verified with data obtained from actual driving on urban roads. The test results show a more robust and accurate dynamic state estimation result when there is a bias in the chassis IMU sensor.

• 자동차안전학회지
• /
• 제14권2호
• /
• pp.51-56
• /
• 2022

This paper presents an Ground Segmentation algorithm to eliminate unnecessary Lidar Point Cloud Data (PCD) in an autonomous driving system. We consider Random Sample Consensus (Ransac) Algorithm to process lidar ground data. Ransac designates inlier and outlier to erase ground point cloud and classified PCD into two parts. Test results show removal of PCD from ground area by distinguishing inlier and outlier. The paper validates ground rejection algorithm in real time calculating the number of objects recognized by ground data compared to lidar raw data and ground segmented data based on the z-axis. Ground Segmentation is simulated by Robot Operating System (ROS) and an analysis of autonomous driving data is constructed by Matlab. The proposed algorithm can enhance performance of autonomous driving as misrecognizing circumstances are reduced.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.87-88
• /
• 2010

• 융합신호처리학회논문지
• /
• 제4권1호
• /
• pp.56-63
• /
• 2003

본 논문은 실제 무인주행자동차에 적용할 수 있는 비전 기반의 소형 자율이동로봇 개발에 관한 연구를 제시한다. 이전의 자율주행차량은 하드웨어 설계의 복잡성, 실장의 어려움과 많은 계산량으로 인해 PC에 대한 의존도가 높았다. 본 논문에서는 고속에서 정확한 조향 및 빠른 이동을 할 수 있고, 단일 카메라를 사용한 독립형 시스템으로 지능적 인식을 할 수 있는 소형 자율이동로봇을 제안한다. 제안된 시스템은 폭 25~30cm, 총길이 200cm로 만들어진 트랙에서 실험하였다. 실험 로봇은 직선 트랙에서 평균 32.9km/h, 곡률반경 30~40m인 곡선트랙에서 평균 22.3km/h의 속도로 주행할 수 있었다 이 시스템은 실제 무인 자동차를 쉽게 만들기 위해 사용할 수 있는 차선 인식 알고리즘을 적용한 소형 자율이동로봇 시스템에 대한 하나의 모델을 제시할 수 있었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.387-392
• /
• 1992

This paper presents a local trajectory generation method which is based on a sequence of reference posture-velocities and the efficient low level control algorithm which constructs the complete smooth curve from the trajectory specification. The reference trajectory generator(RTG) which is in between the local path planner(LPP) and the robot motion controller(RMC) generates a sequence of set-points for each path segments from the LPP and pass it to the RMC. The RMC controls the motions of vehicle which should follow the sequence. In the feedback controller of VMC, the method which compensates robot posture-velocity error correctly is used. These methods are implemented on indoor autonomous vehicle, 'ALIVE' mobile robot. The ALIVE mobile robot system is implemented on the 32bit VME bus system: the two VME CPU's are used for RTG and RMC, while the 80C196KC-based VME board is used for motor controller.

• 로봇학회논문지
• /
• 제18권1호
• /
• pp.93-98
• /
• 2023

In this paper, the development of an autonomous electric vehicle for logistics with a robotic arm is introduced. The manual driving electric vehicle was converted into an electric vehicle platform capable of autonomous driving. For autonomous driving, an encoder is installed on the driving wheels, and an electronic power steering system is applied for automatic steering. The electric vehicle is equipped with a lidar sensor, a depth camera, and an ultrasonic sensor to recognize the surrounding environment, create a map, and recognize the vehicle location. The odometry was calculated using the bicycle motion model, and the map was created using the SLAM algorithm. To estimate the location of the platform based on the generated map, AMCL algorithm using Lidar was applied. A user interface was developed to create and modify a waypoint in order to move a predetermined place according to the logistics process. An A-star-based global path was generated to move to the destination, and a DWA-based local path was generated to trace the global path. The autonomous electric vehicle developed in this paper was tested and its utility was verified in a warehouse.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.403-405
• /
• 1993

The ultrasonic sensor used in autonomous mobile robot and autonomous guided vehicle(A.G.V.) is not available for long range measurement. And as the performance of autonomous mobile robot and A.G.V. improves, the importance of the range sensor for long range measurement is increasing. In this paper, we introduce the range sensor for long range measurement using milimeter wave sensor and propose the structure of that system.

• 로봇학회논문지
• /
• 제17권2호
• /
• pp.198-208
• /
• 2022

In this paper, an autonomous driving system is implemented for the Segye AI Robot Race Competition that multiple vehicles drive simultaneously. By utilizing the ERP42-racing platform, RTK-GPS, and LiDAR sensors provided in the competition, we propose an autonomous driving system that can drive safely and quickly in a road environment with multiple vehicles. This system consists of a recognition, judgement, and control parts. In the recognition stage, vehicle localization and obstacle detection through waypoint-based LiDAR ROI were performed. In the judgement stage, target velocity setting and obstacle avoidance judgement are determined in consideration of the straight/curved section and the distance between the vehicle and the neighboring vehicle. In the control stage, adaptive cruise longitudinal velocity control based on safe distance and lateral velocity control based on pure-pursuit are performed. To overcome the limited experimental environment, simulation and partial actual experiments were conducted together to develop and verify the proposed algorithms. After that, we participated in the Segye AI Robot Race Competition and performed autonomous driving racing with verified algorithms.