• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.318-318
• /
• 2009

The door stiffness is one of the important factors side impact. Generally, the researches have been conducted on the assembled door module. This study is to analysis the side impact characteristics for automotives door module. The impact characteristics have been determined by door module side impact test machine. To determine the initial, intermediate and peak crush resistances use the plot of load versus displacement and obtain the integral of the applied load with respect to the crush distances specified below for each door tested. The initial crush resistance is the average force required to deform the door through the initial 6 inches of crush. The intermediate crush resistance is the average force required to deform the door through the initial 12 inches of crush. The peak crush resistance will be directly obtained from the plot of load versus displacement since it is the largest force required to deform the door through the entire 18 inches crush distance. The data are used to determine if a specific vehicle or item of automotives equipment meets the minimum performance requirements of the subject Federal Motor Vehicle Safety Standard(FMVSS). FMVSS Static 214, Side impact protection, specifies performance requirements for protection of occupants in side impact crashes.

• Journal of Electrical Engineering and Technology
• /
• 제3권3호
• /
• pp.379-384
• /
• 2008

This paper examines permanent magnet eddy current couplings and brakes. Specifically, the effect of permanent magnet magnetization patterns on the magnetic field and force production is investigated. The eddy current couplings and brakes employ high energy-product neodymium-iron-boron (NdFeB) permanent magnets that act on iron-backed copper drums to provide torque transfer from motor to load without mechanical contact. A 2-dimensional finite element modeling is performed to predict the electromagnetic behavior and the torque-speed characteristics of permanent magnet type eddy current couplings and brakes under constant speed operation.

• Elastomers and Composites
• /
• 제41권3호
• /
• pp.147-156
• /
• 2006

본 연구에서는 발포체의 가황거동과 발포특성에 발포온도 및 카본블랙 함량이 미치는 영향을 조사하기 위해 카본블랙을 변량 배합하고 $145^{\circ}C$에서 $165^{\circ}C$까지 $5^{\circ}C$ 간격으로 발포하여 천연고무 발포체를 제조하였다. 발포온도 및 카본블랙 함량이 증가함에 따라 $t_{s2}$ 그리고 $t_{90}$의 감소 경향이 관찰되었다. 본 연구에서 천연고무의 발포 가황특성의 최적 온도는 $165^{\circ}C$ 였으며 이때 발포된 천연고무 밀도가 가장 낮은 것으로 확인되었다. $145^{\circ}C$에서 발포된 천연고무발포체의 가교속도지수가 가장 작은 값을 보였다. 발포 천연고무의 발포 및 모폴로지 특성으로부터 발포체의 밀도 특성을 확인할 수 있었다. 고무내부에 생성된 각 발포 격벽의 두께는 발포온도가 증가함에 따라 감소하는 반면 카본블랙 함량 증가와 더불어 증가함을 보였다.

• 오토저널
• /
• 제18권5호
• /
• pp.77-81
• /
• 1996

현시점에서 냉철한 눈으로 보았을 때 자동차에서 세라믹스의 응용은 부분적으로 성공했을 뿐 전체적으로는 실패하고 말았다. 그러나 현 시점에서 그렇다는 이야기이고 현재는 이루지 못했지만 앞으로는 이루어질 것이라는 강한 암시가 있다. 왜냐하면 구조 세라믹스가 자동차에 채용되는데 있어서 대표적인 예가 될 질화규소 밸브를 대상으로 그 현황을 분석하고 결론을 내리기로 하자. 1. 세라믹 터보차저 (Ceramic Turbocharger). 2. 세라믹 밸브(Ceramic Valve)

• 한국정밀공학회지
• /
• 제21권4호
• /
• pp.132-139
• /
• 2004

The open section members have been used as the members of vehicle such as automotives, airplanes and trains. When vehicles are crashed, these members have absorption of the energy and it is necessary for retainment of the survival space, and as the result, the prediction for the displacement of members in this case of the crash of vehicles is very important. The displacements of members in this case of the crash of automotives show combined aspect of both axial collapse and bending collapse. In the rollover accident when bending collapse happen, the collapse of each members is progressed by the plastic hinge which made from bending moment, and therefore the research for the behavior of members under bending moment after collapse is necessary to determine the internal energy which the members can absorb and the deformed shapes of the members on the step of design. In this paper, the characteristics of bending collapse at the members of the open cross-section were studied with experiment and numerical analysis. We made a comparative studied of the result of the experiment, and changed the axis according to the parallel-axis theorem.

• Journal of Welding and Joining
• /
• 제31권4호
• /
• pp.1-6
• /
• 2013

Nowadays, the weight lightening of automotive is required as conserving the environment has become a major worldwide issue. To solve this issue, various researches for the use of light materials(Alalloy, Mgalloy)and ultra high strength steel as substitutes of the current structural material have been carried out. Application of laser stitch welding to the assembly of automotive produces improvement in strength, lightening of body, higher fuel efficiency, lower production cost as well as reduction in assemble line due to its fast welding speed, superior accessible and weld quality. This process overcomes the shortcomings of the current resistance spot welding such as high electricity consumption, electrode replacement, and economical, technical limitation in design and production method of automotives.

• Elastomers and Composites
• /
• 제51권4호
• /
• pp.317-341
• /
• 2016

Polyamide (PA) is one of five engineering plastic materials which has good mechanical properties and competitive price compared to other engineering plastics and it has various applications including in the areas of automotives, electronics and aerospace industry. Even though PA market grows fast compared to other engineering plastics, it has few organized literatures regarding researches and applications. In this paper, we review overall background, characteristics, formulation, current market trends and technology development of PA resins and their composites.

• 유공압시스템학회:학술대회논문집
• /
• 유공압시스템학회 2010년도 춘계학술대회
• /
• pp.70-73
• /
• 2010

In order to provide theoretical analysis for the active roll stabilizer (ARS), the simulation model based on AMESim is developed in the paper. The simplified vehicle rolling motion model is derived firstly, and then the entire ARS control system model is constructed. Furthermore, the simulation is implemented to confirm the roll control effect. The simulation results show that the derived model can be used as theoretical analysis for developing components of ARS control system.

• 대한기계학회논문집A
• /
• 제35권4호
• /
• pp.425-431
• /
• 2011

차량 제동시 디스크와 패드사이의 미끄럼 접촉에 의해 발생하는 마찰열은 재질의 열 탄성 변형을 일으키고, 이는 접촉면의 압력 분포에 영향을 끼친다. 이러한 열탄성 불안정성 (Thermo-Elastic Instability, TEI)은 디스크의 고유 진동모드와 결합되어 열섬 현상 및 열간 저더 진동을 발생시킨다. 본 연구에서는 상용 유한 요소 해석 프로그램인 SAMCEF 를 이용하여 자동차용 통풍식 디스크에 대한 3 차원 열간 저더 해석을 수행하였다. Staggered approach 에 의거한 중간 처리기를 이용하여 구조-동역학 해석 결과와 열 전달 해석 결과를 교환하였다. 디스크 표면에 열섬이 발생하는 것을 확인하였고, 이를 디스크 고유 진동 모드와 비교함으로써 모드 형상과 열섬 분포의 관계를 분석하였다.

• Elastomers and Composites
• /
• 제52권4호
• /
• pp.249-256
• /
• 2017

The history of polyurethane is relatively shorter compared to that of the other polymers, though its importance has grown rapidly. Due to its unique properties, polyurethanes are widely applied in various fields. In particular, the automotive industry is one of the important application fields. To date, polyols and isocyanates used in the polyurethane industry are generally of petrochemical origin. Recently, owing to the oil crisis, legislation, and growing awareness towards environmental preservation, the demand for more sustainable and eco-friendly raw materials has increased. In this paper, the latest research and development trends in polyurethane applications were reviewed, with a focus on the automobile industry in areas such as seat comfort, noise reduction, light weight, biomass-based polyurethane, and recycling.