• 융복합기술연구소 논문집
• /
• 제9권1호
• /
• pp.37-41
• /
• 2019

The government has designated the hydrogen industry as one of the three most innovative industries and is making a lot of investment and support. Chungcheongbuk-do and Chungju are developing strategies to foster local industries in line with these government policies. Hyundai Mobis's Chungju plant, located in Chungju, is the only fuel cell plant in Korea and is emerging as the center of hydrogen cars as the government's hydrogen mobility industry expands. Chungcheongbuk-do and Chungju City seek to attract relevant institutions and companies based on their regional strengths. In this paper, the current status of hydrogen industry in Chungcheongbuk-do and Chungju-si is discussed and future plans are discussed.

• 에너지공학
• /
• 제24권2호
• /
• pp.17-21
• /
• 2015

다공 및 다단오리피스열을 해석할 수 컴퓨터코드를 사용하여 원자력발전소 내 공급 및 배출장치의 수축오리피스를 설계하였다. 원래 단공 오리피스가 설치되었으나 다공 오리피스 설치가 필요하여 설계 변경되었다. 오리피스 사이 거리는 충분한 압력회복거리로 유지되었다. 최소 정압은 공동현상 방지를 위하여 그 온도에 상응하는 증기압 이하로 유지되도록 설계하였다. 오리피스 설치 배관의 직경은 운전시 강성을 유지할 수 있도록 원래 크기보다 증가시켰다.

• Corrosion Science and Technology
• /
• 제10권6호
• /
• pp.194-198
• /
• 2011

This is the first release of an interim report on the development of coating technology of Zn-Mg alloy layers on steel strip by EML-PVD (electromagnetic levitation - physical vapor deposition) process in an air-to-air type continuous PVD pilot plant. It intends to introduce a basic principle of the EML-PVD process together with the high speed PVD pilot plant built in Posco. Due to the agitation effect provided by the high frequency induction coil, simultaneous evaporation of Zn and Mg from a droplet could produce alloy coating layers with Mg content of 6% to 12% depending on the composition of the droplet inside the coil. For its superior corrosion resistance, Zn-Mg alloy coated steel would be a very promising material for automotive, electrical appliances, and construction applications.

• 한국산학기술학회논문지
• /
• 제10권12호
• /
• pp.3755-3760
• /
• 2009

본 연구에서는 천연가스 처리공정 및 석유화학 공정의 Saturated gas plant에서 주로 사용되고 있는 탈에탄탑(Deethanizer)에 대한 설계 과정과 재비기의 heat duty를 최소화시킬 수 있는 원료 주입단의 위치를 최적화시켰다. 탈에탄탑의 공정 모사를 위해서 상용성 모사기인 Invensys사의 PRO/II with PROVISION을 사용하였으며, 열역학 모델식으로는 Soave가 변형시킨 Redlich-Kwong 상태방정식을 사용하였다. 본 연구를 통해서 분리를 위한 최소이론단수는 9.02단이며, 최소환류비는 0.62437이며, 최적의 이론단수는 20단이며, 최적의 원료 주입단은 9단이고 이때 재비기의 heat duty의 최소값은 $12.7470{\times}10^6\;KJ/hr$임을 알 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권3호
• /
• pp.238-242
• /
• 2015

다중 효용 해수 담수화 설비에 적용되는 증기이젝터 진공장치에 대한 수치해석적 연구를 수행하였다. 본 연구의 목적은 해수 담수화 과정을 위한 증기이젝터 진공장치의 성능특성에 대한 수치적 검토를 수행하는 데에 있다. 증기이젝터 내부의 유동특성을 보다 잘 파악하고 최적의 설계를 도모하기 위하여, 노즐 사이즈 및 디퓨저 축소각의 변화와 같은 설계변수의 변화가 증기이젝터의 성능에 미치는 영향에 대해서도 논의하였다. 해석결과는 실험결과와 전반적으로 잘 일치함을 알 수 있으며, 목부에서의 shock train 현상도 잘 재현하고 있음을 알 수 있다.

• Journal of Mechanical Science and Technology
• /
• 제17권11호
• /
• pp.1746-1755
• /
• 2003

Operating characteristics of a triple pressure reheat HRSG are analyzed using a commercial software package (Gate Cycle by GE Enter Software). The calculation routine determines all the design parameters including configuration and area of each heat exchanger. The off-design calculation part has the capability of simulating the effect of any operating parameters such as power load, process requirements, and operating mode, etc., on the transient performance of the plant. The arrangement of high-temperature and intermediate-temperature components of the HRSG is changed, and its effect on the steam turbine performance and HRSG characteristics is examined. It is shown that there could be a significant difference in HRSG sizes even though thermal performance is not in great deviation. From the viewpoint of both economics and steam turbine performance, it should be carefully reviewed whether the optimum design point could exist. Off-design performance could be one of the main factors in arranging components of the HRSG because power plants operate at various off-design conditions such as ambient temperature and gas turbine load, etc. It is shown that different heat exchanger configurations lead to different performances with ambient temperature, even though they have almost the same performances at design points.

• International Journal of Safety
• /
• 제11권2호
• /
• pp.10-14
• /
• 2012

Recently, the combined power plants are refocused rapidly as a replaceable energy system of the nuclear power plant. The large turbine is revolved highly at 1800~3600 rpm. Thus, the turbine speed should be monitored with mechanical and electrical method for a safety. The electrical cutoff valve which blocks the flow channel with the electrical signal is with a built in. The aim of this study is to develop a manufacturing technology through by the localization of a solenoid actuated directional control valve. Especially the results show performances of the solenoid valve by the experiments and modeling and the reliability estimation. Applied load port pressure was changed rapidly on the form of a quadratic curve over time. And in the cases of square waveform when 0~100 V and 20~120 V input voltage, it was driven on a stable state until 13.4 Hz and 16.6 Hz, respectively. We think that this study will give useful data for the electricity safety system of the combined power plant gas turbine.

• 설비공학논문집
• /
• 제24권7호
• /
• pp.591-597
• /
• 2012

For the past few years, the concern for clean energy has been greatly increased. Ocean thermal Energy Conversion(OTEC) power plants are studied as a viable option for the supply of clean energy. In this study, we examined the thermodynamic performance of the OTEC power system for the production of electric power. Computer simulation programs were developed under the same condition and various working fluids for closed Rankine cycle, regenerative cycle, Kalina cycle, open cycle, and hybrid cycle. The results show that the regenerative cycle showed the best system efficiency. And then we examined the thermodynamic performance of regenerative cycle OTEC power system using the condenser effluent from Uljin nuclear power plant instead of the surface water. The highest system efficiency of the condition was 4.55% and the highest net power was 181 MW.

• 한국산업융합학회 논문집
• /
• 제23권4_2호
• /
• pp.569-581
• /
• 2020

Since the dehydration packages of offshore plant deal directly with oil & gas, there is a great risk of fire and explosion during operation. Therefore, this study performed risk assessment through HAZard & OPerability (HAZOP) for solid desiccant dehydration package that can remove water component of natural gas in offshore floating liquefied natural gas (LNG) production facilities below 0.1 ppmv. The risk matrix was determined by dividing the likelihood and the severity into five levels separately by asset, life, environment and reputation. The piping & instrumentation diagram (P&ID) of the dehydration package was divided into 9 nodes. Total 22 deviations were assessed in consideration of the adsorption and desorption conversion cycle. A risk assessment based on deviations revealed 14 major hazards. Three representative types of hazards were open/close failure of the control valve, control failure of the heater, and abnormal operation of the regeneration gas cooler. Finally, we proposed the installation of additional safety devices to improve safety against these major hazards, such as safety instrumented functions, alarms, etc.

• International Journal of Advanced Culture Technology
• /
• 제8권1호
• /
• pp.135-140
• /
• 2020

The main battlefield of 'made in China 2025' proposed by the Chinese government is the deep integration of industrialization and informatization, among which intelligent manufacturing and new energy vehicles are the key links. New energy vehicle refers to the use of unconventional automotive fuel as a power source (or use conventional automotive fuel, the use of new vehicle-mounted power plant), integrated vehicle power control and driving aspects of advanced technology, the formation of advanced technical principles, with new technology and the structure of the vehicle. BYD's success in the battery, I T and automobile industries has attracted the attention of the industry, making it a shining new star in the Chinese business community. BYD 's innovation, diversification and corporate culture construction have certain enlightenment to the development of China's small and medium-sized enterprises. Therefore, by looking at the Chinese network literature, about BYD's research mainly focused on the development strategy, corporate finance, corporate performance, and corporate marketing, etc. This paper will take BYD as the research object and focus on corporate culture. Through literature analysis and qualitative analysis, it will summarize and further analyze the unique corporate culture of BYD, its important role, and provide relevant theoretical references for the construction and development of corporate culture in other industries.