• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.487-489
• /
• 1998

To evaluate vehicle performances and driving behavior of a vehicle, it is necessary to acquisit and analyze vehicle data during the vehicle driving, which affect fuel economy and emissions. An in-vehicle data acquisition system, which is called Mode Survey System(MOSS), is designed and developed to analyze the traffic and driving patterns of the vehicle. MOSS is a stand-alone system based on the 68HC11 MCU. MOSS logs various data relating to powertrain and vehicle driving such as vehicle speed, engine RPM, gear position, brake, clutch, fuel consumption, and others. The driving patterns are dependent on the driver's habit and the road and traffic conditions, these driving patterns would be able to make a official driving mode to be used in emission, fuel efficiency, shift survey, catalyst durability, and other tests using the analyzed driving patterns.

• 실천공학교육논문지
• /
• 제11권2호
• /
• pp.207-217
• /
• 2019

본 논문에서는 사업의 성공적인 운영을 위한 IPP 운영시스템 구축 사례를 제시한다. 2018년 4기 IPP 운영대학에 선정된 이후 1차년 사업수행을 위해 학사제도와 포털시스템을 구축하였다. 학사제도는 사업운영 규정과 기존 참여대학을 벤치마킹(benchmarking)하여 정규학기와 계절학기가 연계된 4학기제를 기반으로 한 학생 참여의 용이성에, 포털시스템은 학생-기업 매칭과 교내 각종 DB와 연동한 사용 편의성을 위해 맞춤형에 초점을 두고 설계되었다. 구축된 운영 시스템을 적용한 1차 년도 운영은 사업관리기관에서 시행한 실태조사의 많은 항목에서 운영시스템에 만족도가 전국 참여대학의 평균값을 초과하는 결과를 나타냈다. 실태조사 결과를 분석한 후 개선방향을 설정하였다.

• 산업경영시스템학회지
• /
• 제42권4호
• /
• pp.31-38
• /
• 2019

The purpose of this study is to provide the priority of the front-loading factors in the design stage of the automotive parts development process in order to efficiently and effectively respond to the demands of the car maker (customer). Front-loading is defined as a strategy in order to improve development performance by shifting the identification and solving of design problems to earlier phases of a product development process. Two approaches of the front-loading are project-to-project knowledge transfer and rapid problem solving. For the study, a survey was conducted on the R&D department in the automobile parts company and analyzed by AHP (Analytic Hierarchy Process) method. The result of the survey shows the cost savings is the highest weight in terms of front-loading effect and in terms of front-loading factors, it gives priorities as "the problems of past project" first, "Design Review" second, "CAE (Computer Aided Engineering)" third, "FMEA (Failure Mode and Effects Analysis)" fourth, "benchmarking" and SR (Sourcing of Requirements). The results of the study will be helpful to provide practical value for improving product design of component development.

• 융합정보논문지
• /
• 제11권10호
• /
• pp.171-181
• /
• 2021

본 연구는 코로나19로 인한 대학의 원격수업이 장기화하고 교수자와 학습자의 어려움이 계속됨에 따라, 여러 기술이 결합 된 기술융합 부문 공업계 대학 교수자와 학습자의 인식 파악을 통하여 개선 방안을 도출하고자 하였다. 이를 위해 2020학년도 2학기 종료 시기에 자동차 계열 교수와 학생들을 대상으로 온라인 설문조사를 실시하였다. 설문조사 분석 결과, 교수와 학생은 온라인 수업의 장점 측면에 대해서는 시공간의 자유로움, 반복 학습 가능, 재활용 등 유사한 인식을 하는 것으로 나타났다. 애로사항 측면에서는 학생은 현장감 부족으로 학습몰입 떨어짐을, 교수와 학생 모두는 상호작용의 어려움을 상대적으로 크게 느끼는 것으로 나타났다. 본 연구는 기복이 있는 코로나 상황과 코로나 이후 공업계 대학의 온라인 교육에 대하여 대학 정책지원에 관한 제언과 기본자료를 마련한다는 의의가 있다.

• 한국정보통신학회논문지
• /
• 제26권6호
• /
• pp.922-929
• /
• 2022

이 연구는 PBL을 활용한 CAE 수업이 전문지식 습득과 역량 제고에 미치는 영향을 분석한다. 동의대학교 자동차공학과 3학년 학생들에게 1년 과정의 교과목에 PBL 수업을 적용하였으며, 1학기와 2학기에 각각 만족도 및 효과에 대한 설문조사를 실시하였다. 각 학기별 설문조사에서 유의미한 차이로 2학기의 만족도가 높은 것으로 나타났으며, 비대면 정보교류와 팀 활동에 대해서는 만족도가 높게 나왔다. 아울러 교과목에 대한 지식과 기주도학습, 문제해결력, 의사소통 등의 개인 역량 향상에도 긍정적인 영향을 미치는 것으로 평가됐다. 본 연구는 수업 개선을 위한 정량적 지표로 사용될 수 있으며, 교과목 운영의 기초자료로 활용할 수 있다는 점에서 교육적 함의가 있다.

• 한국안전학회지
• /
• 제38권1호
• /
• pp.9-17
• /
• 2023

In this study, we aimed to identify the important hazard factors and determine their criticality in causing serious accidents in vehicle-mounted mobile elevated work platforms (MEWPs). Fuzzy failure modes and effects analysis (FMEA)was performed using accident data and a survey of experts. To determine the hazard factors, the accident data for the last 10 years were used and a questionnaire survey was designed. The questionnaire survey was sent to four experts in the field of occupational safety to determine the severity, occurrence, and detectability of serious accidents in MEWPs. Furthermore, objective RPN scores and risk priority were obtained using fuzzy FMEA. Finally, the criticality of hazard factors in descending order was found to be overloading, non-installation or defective installation of outriggers, breakage due to wire rope aging, and illegal remodeling of vehicle structures. The results were verified by comparing the occurrence data of serious disasters.

• 한국자동차공학회논문집
• /
• 제8권4호
• /
• pp.42-50
• /
• 2000

Drop size distribution of an air-assisted fuel injector(AAFI) was investigated. Influence of parameters such as ambient air density supply pressure and air-liquid mass ratio(ALR) was examined through both measurement and analysis. The Sauter mean diameter$D_{32}$ varied from 9 to 25$\mu$m throughout all experimental conditions. An empirical correlation for droplet size was obtained. Analytical correlations for predicting $D_{32}$ with respect to operating conditions were also derived through energy consideration and introduction of a simplified model of the from the empirical fitting was adapted to the original equation the proposed correlation in this study matched more closely with measured results. The current correlation exhibited a favorable study matched more closely with measured results. The current correlation exhibited a favorable prediction for $D_{32}$ compared to that by the empirical correlation at selected experimental conditions so that it may be used to predict atomization performance of the AAFI at operating conditions which was not covered in the measurements. After validation the analytical equation was applied to survey the feasible operating conditions for gasoline direct injection application.

• 한국자동차공학회논문집
• /
• 제17권1호
• /
• pp.96-104
• /
• 2009

An anatomically detailed elderly human body model is under development. Using the anthropometric database of domestic nation-wide size survey, SizeKorea, a standard size and shape of 50th %tile elderly was constructed. Through the local recruitment process, a male volunteer with 71 years of age, 163cm of height and 63kg of weight has been selected. The exterior (skin) and interior (skeleton and organ) geometries were acquired from whole body 3D laser scan and various medical images such as CT, X-ray, and Ultrasonic of the volunteer. A particular attention has been paid into the combining process of exterior and interior geometries especially for joint articulation positions since they were measured at different postures (sitting vs. supine). A whole ribcage of PMHS which possessed similar anthropometry and age of standard 50th %tile elderly was prepared and dissected for the precise gauge of cortical rib bone thickness distributions. After completing the morphological construction of elderly human body, the finite element modeling will be processed by meshing elements and assigning mechanical properties to various biological tissues which reflect the aging effect.

• International Journal of Automotive Technology
• /
• 제7권3호
• /
• pp.309-314
• /
• 2006

In this paper, the ride comfort from a computer simulation was compared to the experimental result. For measuring ride comfort of a passenger car, acceleration data was obtained from the floor and seat during highway running with different speeds. The measured acceleration components were multiplied by the proper weighting functions, and then summed together to calculate overall ride values. Testing several passenger cars, the ride comforts were compared. In order to investigate the effect of vibration signals on the steering wheel, an apparatus to measure the vibrations and weighting functions on the steering wheel were designed. The effect of the steering accelerations on the ride comfort were investigated and added for the overall ride comfort. For the computer simulations, Korean dummy models were developed based on the Hybrid III dummy models. For the Korean dummy scaling, the national anthropometric survey of Korean people was used. In order to compare and check the validity of the developed Korean dummy models, dynamic responses were compared to those of Hybrid III dummy models. The computer simulation using the MADYMO software was also compared to the experimental results.

• 한국수소및신에너지학회논문집
• /
• 제32권4호
• /
• pp.271-276
• /
• 2021

Although the development of electric vehicles or electric commercial vehicles is underway in Korea, most companies are seeking to enter the global market because it is difficult to expand their business only in the domestic market. In addition, it is recognized that the country has difficulties in responding to regulations or related procedures when entering overseas markets, and due to such difficulties, it is not possible to gain opportunities to enter the market and gain the technical advantage. Therefore, it is necessary to support individual companies to overcome the difficulties of promoting and exporting products by establishing a pre-cycle support environment for technology development so that development parts can be installed in small electric commercial vehicles. Therefore, this study tried to understand the necessity and factors of small electric commercial vehicles for major ASEAN countries, and as a result, most of them raised the urgency and necessity of joint research.In addition, human resource development, government support, and technical support were suggested as the necessary factors for the study.