• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.301-304
• /
• 2002

Powertrain simulation is important fur the analysis of a vehicle performance. Automotive powertrain has been considered as the unified system and should be remodeled, whenever a powertrain system is changed. In this study, a new method is proposed for the synthetic modeling for the automotive powertrain. Components are separated from the powertrain system and constructed the matrix through dynamic relationships. The dynamic equation of the total powertrain system can be driven from the combination of each component. In order to combine each component, the superposition method is modified for the powertrain composition.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.439-442
• /
• 2002

Powertrain simulation is important far the analysis of a vehicle performance. Automotive powertrain has been considered as the unified system and should be remodeled, whenever a powertrain system is changed. In this study, a new method is proposed far the synthetic modeling for the automotive powertrain. Components are separated from the powertrain system and constructed the matrix through dynamic relationships. The dynamic equation of the total powertrain system can be driven from the combination of each component. In order to combine each component, the superposition method is modified for the powertrain composition.

• International Journal of Automotive Technology
• /
• v.8 no.6
• /
• pp.731-744
• /
• 2007

A method for dynamic analysis and design calculation of a Powertrain Mounting System(PMS) including Hydraulic Engine Mounts(HEM) is developed with the aim of controlling powertrain motion and reducing low-frequency vibration in pitch and bounce modes. Here the pitch mode of the powertrain is defined as the mode rotating around the crankshaft of an engine for a transversely mounted powertrain. The powertrain is modeled as a rigid body connected to rigid ground by rubber mounts and/or HEMs. A mount is simplified as a three-dimensional spring with damping elements in its Local Coordinate System(LCS). The relation between force and displacement of each mount in its LCS is usually nonlinear and is simplified as piecewise linear in five ranges in this paper. An equation for estimating displacements of the powertrain center of gravity(C.G.) under static or quasi-static load is developed using Newton's second law, and an iterative algorithm is presented to calculate the displacements. Also an equation for analyzing the dynamic response of the powertrain under ground and engine shake excitations is derived using Newton's second law. Formulae for calculating reaction forces and displacements at each mount are presented. A generic PMS with four rubber mounts or two rubber mounts and two HEMs are used to validate the dynamic analysis and design calculation methods. Calculated displacements of the powertrain C.G. under static or quasi-static loads show that a powertrain motion can meet the displacement limits by properly selecting the stiffness and coordinates of the tuning points of each mount in its LCS using the calculation methods developed in this paper. Simulation results of the dynamic responses of a powertrain C.G. and the reaction forces at mounts demonstrate that resonance peaks can be reduced effectively with HEMs designed on the basis of the proposed methods.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.5
• /
• pp.508-514
• /
• 2015

In this paper, the powertrain efficiency is analyzed for the input split type hybrid electric vehicle. For considering the powertrain loss, the power loss models of planetary gear and motor are applied. And, the mathematic equations of powertrain speed and torque are found by using the lever analogy. With the above models and equations, the powertrain efficiency is analyzed for the 0 to 180 km/h vehicle velocity range. From the analysis results, it is found that the transmission efficiency with the power loss of planetary gear is smaller maximum 2.1% than the transmission efficiency without the power loss of planetary gear.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.6
• /
• pp.575-582
• /
• 2015

The Durability cycle is very important for the success of vehicle testing to evaluate Retarder. The purpose of this study is to develop the durability mode on performance evaluation of retarder. Commercial vehicles are equipped with an auxiliary braking device in order to increase safety. A typical device for retarder depends heavily on imports. Domestic development has now become an urgent task. But, No state has an evaluation method for performance evaluation of the auxiliary braking device. We presented the durability test mode for the performance evaluation of the retarder was verified experimentally.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.6
• /
• pp.205-215
• /
• 1996

In this paper, the performance analysis of the vehicle with the Ravigneaux type automatic transmission has been carried out using information of engine and drivetrain. It is necessary to understand the overall system including engine, torque converter, clutch, planetary gears, and road load. The equations of motion are derived from dynamic model. The GUI computer simulation program has been developed to analyze the powertrain performance of the vehicle with the Ravigneaux type automatic transmission.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.2
• /
• pp.185-191
• /
• 2001

In many papers, the powertrain system generally has been madeled as one-dimensional torque model. One-dimensional powertrain model may calculate the torque correctly but it does not consider the non-rotational degrees-of-freedom of the powertrain components and the interaction of these degrees-of-freedom with the vehicle body frame and suspension. To consider the non-rotational degrees of freedom, the differential is modeled as a three-dimensional rigid body in this paper. A constant velocity joint is newly formulated and a relative constraint is also formulated to model the motion transfer due to gear ratio of the differential. Implementing the proposed powertrain system in the multibody model, more detail dynamic responses can be obtained. Obtained outputs such as reaction torques on the constant velocity joint and reaction forces on the rack can be useful data in the design of a powertrain.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1611-1612
• /
• 2006

We are using the Faraday's electromagnetic law so as to improve our life in various industry fields. However, the side effect of the Faraday's law can be occurredin the sensors of the vehicle due to the high current flow such as Ignition. This effect is mainly caused by the shape of the wiring harness between sensor and high current load in the vehicle. To minimize the side effect by Faraday's law, three methods shall be considered in this paper (1) Pin definition of the sensor, (2) Pin definition of the high current load, (3) Wiring harness shape.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.6
• /
• pp.97-106
• /
• 2011

Both an optimal design of the engine operating strategy and fuel economy prediction technique for a HEV under the vehicle driving condition are very crucial for the development of vehicle fuel economy performance. Thus, in this study, engine operating characteristics of PRIUS III were analyzed with vehicle running conditions and the correlations between vehicle tractive power and fuel consumption were introduced. As a result, fuel economy performance of PRIUS III with various test modes were predicted and verified. Errors of predicted fuel economy were between -5% and -1%.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.11 no.5
• /
• pp.147-155
• /
• 2003

The application of object-oriented modeling to develop a powertrain performance simulation program, called O-DYN, is introduced. Powertrain components, such as the engine, transmission, shaft, clutch are modeled as classes which have data and method by using object-oriented modeling methodology. O-DYN, a performance simulation program, based on the object-oriented modeling is made in C++. One powertrain simulation using O-DYN is proposed, and it is expected that the simulation program or individual class constructed in this paper would be useful for automotive engineers to predict the performance of powertrains and to develop a simulation program.