• 한국자동차공학회논문집
• /
• 제8권5호
• /
• pp.196-206
• /
• 2000

These days, the fuzzy logic or the fuzzy set theory has received attention from a number of researchers in the area of industrial application. Moreover, the fuzzy logic control has been successfully applied to a large numbers of control problems where the conventional control methods had failed. Using this control theory we designed a climate controller for an automotive climate control system whose mathematical model is difficult. This paper describes an automotive climate control where the fuzzy control has been used to stabilize parameter uncertainties and disturbance effects. To show the validity and effectiveness of the proposed control method, the fuzzy logic controller was implemented with a philips 80C552 microcomputer chip and tested in an actual vehicle. From the experimental results, it could be conduced that the proposed controller is superior to conventional controllers in both control performance and thermal comfort. The climate control system in cars is difficult to model mathematically so we tested a fuzzy logic control system which promised better results.

• International Journal of Automotive Technology
• /
• 제7권2호
• /
• pp.217-226
• /
• 2006

To maintain competitiveness in the modern automotive market, it is important to carry out process planning concurrently with new car development processes. Process planners need to make decisions concurrently and collaboratively in order to reduce manufacturing preparation time for developing a new car. Automated generation of a simulation model by using the integrated process plan database can reduce time consumed for carrying out a simulation and allow a consistent model to be used throughout. In this research, we developed a web-based system for concurrent and collaborative process planning and flow analysis for an automotive general assembly using web, database, and simulation technology. A single integrated database is designed to automatically generate simulation models from process plans without having to rework the data. This system enables process planners to evaluate their decisions quickly, considering various factors, and easily share their opinions with others. By using this collaborative system, time and cost put into the assembly process planning can be reduced and the reliability of the process plan would be improved.

• 한국자동차공학회논문집
• /
• 제15권4호
• /
• pp.154-160
• /
• 2007

The experimental system, developed in this research, is a teaching material that trains and practices automobile electric circuit in technical high school. This system consists of a textbook, 15 kinds of instruments and 62 kinds of 'Flash' animations. Textbook includes automobile electric circuits and experimental process. Instruments have 23 kinds of drills. Its is composed of electrical relays, motors, switches, light bulbs, electrical lines and power unit so on. 'Flash' animation displays an electrical current flow on circuits actually. Both Dacum method and ISD skill have been conducted to analysis job and design syllabus. The experimental system have been implemented on technical high school class to evaluate its objectivity and effect. It is expected that this system can contribute to studying of car service.

• International Journal of Automotive Technology
• /
• 제7권6호
• /
• pp.757-762
• /
• 2006

Reliability of automotive parts has been one of the most interesting fields in the automotive industry. Especially, a small DC motor was issued because of the increasing adoption for passengers' safety and convenience. For several years, small DC motors have been studied and some problems of a life test method were found out. The field condition was not considered enough in the old life test method. It also needed a lot of test time. For precise life estimation and accelerated life test, new life test procedure was developed based on measured field condition. The vibration condition on vehicle and latent force on fan motor shaft were measured and correlated with each other. We converted the acceleration data into the load data and calculated the equivalent load from integrated value. We found the relationship which can be used for accelerated life test without changing the severity by using different loading factors.

• 한국CDE학회논문집
• /
• 제12권6호
• /
• pp.452-460
• /
• 2007

To achieve rapid developments and cost savings in manufacturing industries including automotive die shops, new paradigm and its supporting systems of information managements through total product life cycle are needed for concurrent and collaborative engineering. For manufacturing of automotive press dies, integrated and efficient managements of PPR information including product, manufacturing process and resource are essential. In this paper, we introduce a PLM approach to achieve engineering collaborations in product development and production of automotive dies. To prove concepts and benefits of PPR information managements, we implement new business workflow and detail procedures, PPR information management system and other related applications. By PPR information managements in PLM, improvements in quality of engineering results and savings in time from design to production of dies are possible.

• 반도체디스플레이기술학회지
• /
• 제18권3호
• /
• pp.127-132
• /
• 2019

This paper presents an overview of automotive communication technologies, including related technology developments. We describe the latency of Audio Video Bridge (AVB) network as well as purpose the optimized design of the Ethernet network system for automotive. Our design plays a significant role in reducing the delay between components. The proposed approach on realistic test cases showed that there was a delay reduction, approximately 49.4%. It is expected that the optimization method for the actual automotive environment can greatly shorten the time period in the design and development process. The results obtained from the experiments on the delay time present in each function are reliable because average values are obtained through repeated actual tests for several months. It will greatly benefit the industry since analyzing the latency between each function in a short period of time is very important.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.665-670
• /
• 2001

The purpose of this paper is to verify a finite element model of an automotive exhaust system using Modal testing. In general, a lot of finite element models are used in initial design step of automotive development. One of them is a finite element model of an exhaust system. Verification on the finite element model of an automotive exhaust system is indispensable. In this paper, a finite element analysis on the exhaust system using MSC/NASTRAN is carried out, and the results are compared with those obtained by modal testing. By comparing MAC values of the analytical modes with the experimental modes, the finite element model of the automotive exhaust system is verified.

• 자동차안전학회지
• /
• 제15권1호
• /
• pp.16-26
• /
• 2023

Recently, the importance of simulation in a virtual driving environment as well as real road-based tests for autonomous vehicle testing is increasing. Real road tests are being actively conducted at K-City, an autonomous driving test bed located at the Korea Automobile Safety Test & Research Institute of the Transportation Safety Authority. In addition, the need to advance the K-City virtual driving environment and build a virtual environment similar to the autonomous driving system test environment in real road tests is increasing. In this study, for K-City of Korea Automobile Safety Test & Research Institute, using detailed drawings and actual field data, K-City virtual driving environment was advanced, and similarity verification was verified through comparative analysis with actual K-City.

• 한국해양공학회지
• /
• 제26권1호
• /
• pp.41-46
• /
• 2012

A deep-sea manganese nodule miner consists of 4 parts: the pickup device, crusher, disposal device, and tracked vehicle. The tracked vehicle is an essential component to keep the self-propelled miner moving across deep-sea soil. The performances of the tracked vehicle are influenced by noise factors: the shear strength of the seafloor, bottom current, seafloor slope, track speed, reaction forces of flexible hose, etc. It is necessary to adopt a robust design method that improves the performances and minimizes the variation caused by noise factors. Taguchi's method, the most widely known robust design method, searches for the robust optimum using an orthogonal array composed of the product of the inner array and outer array. In this paper, we propose a new screening technique to reduce the number of input factors and apply the MRSN (Multi-Response Signal to Noise) ratio to convert multiple performances into single one in order to overcome the difficulties and limitations of using Taguchi's method in a case with many input factors and multiple performances. A test miner was already designed and tested. It has about 1/10 the capacity of a commercial one and was successfully operated at an in-shore area. Taguchi's robust design was applied to the tracked vehicle of the test miner, and design improvements were implemented for the vehicle.

• 한국CDE학회논문집
• /
• 제19권4호
• /
• pp.324-331
• /
• 2014

In the design of a combat vehicle, various performances such as firepower, mobility and survivability, etc., should be considered. Furthermore, since these performances relate to each other, design framework which can treat an integrated system should be employed to design the combat vehicle. In this paper, we use empirical interior ballistic and 3D combat vehicle analyses for predicting firepower and mobility performances which are developed in previous study (1) integrated performance modeling. In firepower performance, pitch and roll angle by sequential firing are considered. In mobility performance, vertical acceleration after passing through a bump is regarded. However, since there are many design variables such as mass of vehicle, mass of suspension, spring and damping coefficient of suspension and tire, geometric variables of vehicle, etc., for firepower and mobility performance, we utilize analysis of variance and quality function deployment to reduce the number of design variables. Finally, integrated design optimization is carried out for integrated performance such as firepower and mobility.