• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.5
• /
• pp.14-21
• /
• 2011

In diesel engines, accurate EGR control is important due to its effect on nitrogen oxide and particulate matter emissions. Conventional EGR control system comprises a PI feedback controller for tracking target air mass flow and a feedforward controller for fast response. Physically, the EGR flow is affected by EGR valve lift and thermodynamic properties of the EGR path, such as pressures and temperatures. However, the conventional feedforward control output is indirectly derived from engine operating conditions, such as engine rotational speed and fuel injection quantity. Accordingly, the conventional feedforward control action counteracts the feedback controller in certain operating conditions. In order to improve this disadvantage, in this study, we proposed feedforward EGR control algorithm based on a physical model of the EGR system. The proposed EGR control strategy was validated with a 3.0 liter common rail direct injection diesel engine equipped with a DC motor type EGR valve.

• Journal of Practical Engineering Education
• /
• v.8 no.2
• /
• pp.91-94
• /
• 2016

This study is focused on the development and application of automotive lighting system simulator device to help understanding of the repair and overhaul, electrical instrumentation and automotive circuit checks the contents of the automotive electrical system. The purpose of this study is to define the circuit numeracy, circuit repair preparation skills, detachable power, circuit analysis capabilities, inspection and measurement capability, and repair (problem solving) skills, through the cultivation of clean ability to increase the understanding of electrical equipment maintenance circuitry to verify the improvement of the repair. Automotive electrical device requires understanding of the invisible parts, and understanding of the various symbols and complex circuitry to measure the basic checks and repair are indispensable. This paper would likely contribute to help students to gain more interest in the fields that they feel difficult such as basic skills which necessary to cultivate a variety of electrical equipment fault diagnosis of the basic knowledge needed for electric cars practical.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.942-946
• /
• 1995

Using database obtained by means of experiments, or using the synamic behaviour analysis program of automotive shock absorber, database system is constructed within the limits of adequate reliability. Thus constructed data base can be used to find out corresponding specification of shock absorber design parameters to the required damping ability and tolerance.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.816-819
• /
• 1996

This paper focuses on development of simulation model for SAE J1850 and performance evaluation of a J1850 network. The simulation model has been developed by using discrete event simulation language. SAE J1850 is one of Class B network protocol for general data sharing applications. Through numerous simulation experiments, several important performance factors such as the probability of a successful transmission, average queue delay, and throughput have been evaluated.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.319-322
• /
• 2002

In this Paper, we suggested the Half-Bridge inverter for the automotive HID electronic ballast. electronic ballast for automotive HID lamp should be supplied by low-frequency square wave avoiding the acoustic resonance(11kHz ∼ 825kHz). When the HID lamp is hot state, the electronic ballast should supply the sufficient current for a few milli-second to the lamp at the re-strike ignition state. that is called take-over current. We have introduced the new take-over current control method that could have reduced the peak current and supplied the sufficient take-over current.

• Journal of the korean Society of Automotive Engineers
• /
• v.13 no.5
• /
• pp.21-25
• /
• 1991

자동차 성능의 고도화 및 사회적 Needs의 변화에 대응하여 철강재료, 특히 특수강 재료의 고급화 및 신강종 개발이 시급히 요구되고 있는 실정이다. 따라서 특히 본 자료에서는 자동차 재료로서의 특수강에 대한 Needs를 파악해 보고 다양해지는 Needs에 대응하여 활발히 진행되고 있는 자동차용 특수강 재료의 개발동향을 주요 구성부품별로 알아보고 아울러 특수강 제조기술의 개발동향을 소개하고자 한다.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2001.05a
• /
• pp.129-133
• /
• 2001

Accelerated life test is a viable method for identifying failure modes, incorporating design changes on an on-going basis during the early stages of automotive development program. The information from tests at high stress levels is extrapolated to obtain estimate of life at normal stress levels. This paper presents a practical method for accelerated life test to achieve a specified accuracy in estimating life at a design stress. Recommended and optimum plan are presented and the plans are illustrated with a simulated test data for the automotive power element example.

• Corrosion Science and Technology
• /
• v.9 no.6
• /
• pp.254-258
• /
• 2010

Due to the global warming and economic crisis, automakers are currently focusing on the development of high fuel-efficiency vehicles. To accord with these requirements, steelmakers have been trying to develop advanced high-strength steels with improved automotive-related properties. In addition, galvanizing technologies have been developed to improve coating properties for AHSS (Advanced High Strength Steel) such as pre-oxidation and pre-coating, as well as roll dent prevention. In this paper, newly developed products and technologies for automotive galvanized steel sheet are reviewed.

• CDE review
• /
• v.9 no.3
• /
• pp.31-35
• /
• 2003

Product Data Management(PDM) is a tool that helps engineers and others manage both data and the product development process. Now a day, automotive industry is interested in PDM for their product's quality and cost. In this study, we introduce about samlip PDM construction instance. This case explains the demanded function of PDM and the detail implementation methodology for automotive company.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.447-448
• /
• 2019

본 논문은 다양한 전기 자동차의 배터리 전압을 위해 150V-1000V의 넓은 출력전압을 만족하고 전기자동차의 수요자원화를 위해 양방향 제어가 가능한 DC-DC 컨버터를 제안한다. 제안하는 컨버터는 절연형 컨버터와 비절연형 컨버터가 결합된 2단 방식의 구조로 연결된 배터리의 전압에 따라 CC(Constant Current) 또는 CP(Constant Power)로 동작한다. 전체시스템은 20kW급으로 설계하여 시뮬레이션 및 시제품을 통해 출력특성 및 효율을 분석하였다.