The objective of manufacturing knowledge sharing platform is to convert the production experience like a worker's know-how into quantitative values, to construct database of the process technologies and to share the technologies systematically via web portal service. In addition, the knowledge sharing platform contains the total production processes of automobile and mobile products such as information of experts, facilities, and cutting-edge R&D outputs. Automobile, telecommunication mobile, and semiconductors account for a large amount of Korea's export industry rate. These industries need production technology which is a result of converting worker's know-how and R&D. Manufacturing knowledge portal aims to enable transforming production experience such as worker's know-how into standardized form for constructing database and sharing technologies systematically. Manufacturing knowledge portal can contribute to small and mid-sized manufacturing companies with further improvements.
Journal of Korean Society of Occupational and Environmental Hygiene
/
v.1
no.2
/
pp.144-153
/
1991
This study was conducted to evaluate worker exposure to airborne asbestos fibers by industry, and to evaluate polarized-light microscopy for determining airborne asbestos fibers. A total of 11 plants including asbestos textile, brake-lining manufacturing, slate manufacturing, and automobile maintenance shops were investigated. Rsults of the study are summarized as follows. 1. Worker exposure levels to airborne asbestos fibers were the highest in asbestos textile industry, followed by brake-lining manufacturing, slate manufacturing, and automobile maintenance shops, in order. In asbestos textile industry, large variation of asbestos levels was found by plants. The worst plant indicated airborne fiber concentrations in excess of 10 fibers/cc, however, the best plant showed concentrations within 0.50 fibers/cc. 2. Characterization of airborne fibers by industry indicated that fibers from asbestos textile industry were the longest with the largest aspect ratio. Fibers from automobile maintenance shops were the shortest with the smallest aspect ratio. Based on characteristics of fibers and the highest levels of concentrations, it is concluded that workers in the asbestos textile industry are exposed to the highest risk of producing asbestosis, lung cancer, and mesothelioma. 3. Result s obtained using polarized-light microscopy were $43.7{\pm}12.3%$ of the results obtained using phase contrast microscopy. This may be resulted from the worse resolution of polarized-light microscopy than that of phase contrast microscopy. Based on the results, it is recommended that polarized-light microscopy be used for mainly bulk sample analyses and further study be performed to improve the method for determining airborne samples. However, polarized-light microscopy can be used for determining thick fibers.
Objective: This study aims to understand the occupational injury characteristics of the workers in the motor vehicle parts (automobile parts) manufacturing industry and to present basic guidelines on accident prevention through accident analysis. Background: There occur many occupational injuries in the motor vehicle parts manufacturing industry. But there were few researches for the occupational injuries of the workers in the motor vehicle parts manufacturing industry. Method: This study analyzed the data of occupational injuries of 1,609 workers in the motor vehicle parts manufacturing industry in 2015. The accident characteristics were analyzed by dividing them into worker related factors and accident related factors. Results: Among the occupational injuries of the workers in the motor vehicle parts manufacturing industry, 80.6% of the victims were males, 64.0% were older than 40. 57.8% of the victims were employed by the companies with less than 50 workers. In addition, there was a difference in accident characteristics according to age, work experience, employment type, events or exposures, accident time of the day, agents, natures of injuries and illnesses, injured organs and injured body part. Conclusion: It is important to prevent equipment/machinery accidents. For this purpose, more efforts should be made to establish safety measures faithful to the basics of safety devices and safety work procedures. It is also suggested that prevention of disasters should be intensively carried out for workplaces with less than 50 employees and middle-aged and elderly people. Application: The result can be used to present guidelines for preventative measures for the workers in the motor vehicle parts manufacturing industry including safety education/training.
The efficiency of the purchasing and procurement logistics is important in automotive industry. The rationalization of production system is directly impact on productivity and quality. For this reason importance of logistics is high. Despite we are continuously making effort, our country are still below the level than developed country on logistics efficiency. Rising labor costs is an important factor in increasing logistics costs. So workforce reduction in logistics department is a large part. We deal with A-company inbound logistics, especially procurement logistics in automotive logistics as research object. So in this study we do research on work load balance about workers. We do research on 1,475 kinds of components in procurement process. We applied work load balance algorithm on chassis, final, sequence, trim warehouses workers. According to number of workers and average M/H, algorithm is applied in two ways. After applied work load balance algorithm we reduced numbers of workers from 28 to 20 and improved worker load balance rate from 47.1% to 93.7%.
Purpose: The aim of this study was to investigate and compare the risk factors focusing on the neck and lower back between general workers (GW) and mild intellectual disability workers (MIDW) in the automobile manufacturing industry. Methods: A total of 32 participants were required for this study design to achieve 80% power, 0.9 effect size, and an alpha level of 0.05. Each group consisted of 16 subjects, including GW and MIDW. Pain levels in the neck and lower back were measured for all participants using the visual analog scale (VAS). A dual digital inclinometer was used to measure the range of motion (ROM) in the neck and lower back three times, and the average was used for analysis. The independent t-test was used to compare between the wo groups. Cohen's d effect analysis was employed to determine the effect size. The significant level was set at 0.05. Results: In the MIDW, neck pain was significantly higher, and left cervical flexion was significantly decreased compared with the GW. There was no significant difference in lower back pain between the MIDW and GW. However, both lumbar flexion and extension, as well as lateral flexion, were significantly reduced in the MIDW compared with the GW. Conclusion: This study reveals that MIDW working in the automobile manufacturing industry have a greater risk of neck pain, limitation in left cervical flexion, and overall restriction in the ROM of the lower back compared with GW.
According to the Statistics Korea, in 2011, people over the age of 65 years old accounted for 11.8% of Korea's population. This number is expected to rise to 15.0% by 2019, making Korea an "aged society". As age increases, physical ability degrades to the point that the workload must be adjusted limitations. However, workloads are given regardless of workers' ages or abilities. In addition, a decline in work efficiency due to aging also increases the risk of work-related injuries. Furthermore, the cases of stress related diseases along with musculoskeletal disorders(MSDs) rise as main factors of industrial disasters and excessive job stress gives negative influence not only on mental health but also on physical health so that job stress becomes a hot issue as a main cause of work ability falloff and turnover. The purpose of this research is to examine how the sociodemographic characteristics, MSDs symptoms and musculoskeletal workload of workers in the manufacturing industry of automobile parts influence work ability and job stress. As a result of the research, job ability showed significant differences statistically according to age, working year, sex, marital status and musculoskeletal workload and job stress showed significant differences statistically according to age, working year, marital status and musculoskeletal workload. In addition, it showed that as the worker's job ability decreases, job stress increases.
International standards claim the best possible reliability in industrial manufacturing processes. This is also essential for the application with manual applicators. The application of adhesives with manual applicators is one of the most frequently used application techniques. The range of application reaches from the building of prototypes in the automobile industry over the use in single or small-batch manufacturing up to applications in crafts enterprises. Conventional manual applicators for adhesives and sealants don't fulfill the demands in international standards for the best possible reliability. Only the worker is able to control the quality and the quantity of the bond. A velocity-controlled manual applicator solves these restrictions. Special sensors and micro controllers calculate the flow-rate, the velocity and the location of the manual applicator. This leads to stable and repeatable application processes which are claimed in international standards. The location of the bond can be compared with the nominal value, so that it is possible to check the quality of the bond during application. Furthermore there is the potential to document the data of the manufacturing process.
Journal of the Korean Society of Physical Medicine
/
v.14
no.3
/
pp.109-116
/
2019
PURPOSE: This study examined the effects of an active tailored exercise program on pain and the Oswestry disability index (ODI) among workers with musculoskeletal symptoms of the lower back in an automobile parts manufacturing company. METHODS: Twenty-two workers with musculoskeletal symptoms of the lower back were included in the study. The experimental group was composed of 15 workers and a control group of seven workers. The experimental group was provided an active tailored exercise program and education on the risk factors of musculoskeletal disorders. The control group was only provided ergonomic education. The exercise program, which consisted of movement pattern correction, muscle stretching and strengthening, and postural correction exercises, was applied twice a week for two months for one hour a day. Pain, which was determined using a visual analogue scale (VAS), and the ODI were measured before and after exercise. RESULTS: After applying the exercise program for two months, the VAS and ODI of the experimental group were significantly lower than those of the control group (p<.05). In the experimental group, the VAS decreased significantly after one month (p<0.05), and the ODI decreased significantly after two months (p<.05). CONCLUSION: Because active tailored exercise programs are effective in improving the pain and disability indices, it is necessary to actively implement such programs among manufacturing workers with musculoskeletal symptoms of the lower back.
Objective: The purpose of this study is to investigate the effect of exercise programs according to various music tempo on pain, posture, and function of automobile parts manufacturing workers. Design: Two-group pretest-posttest design. Methods: This study was an exercise program tailored to the prevention and treatment of musculoskeletal diseases were performed for a total of 4 weeks and 3 times a week for 60 minutes. The exercise program consisted of customized exercises according to the characteristics of the subject's musculoskeletal system. The subject provided music during the exercise program, and the group who applied the fast tempo music listened to the music of 120~140 bpm, and the group who applied the slow tempo music listened to the music of the low tempo of 60~80 bpm. Results: Significant differences were found in pain and physical function before and after the fast tempo music group and the slow tempo music group (p<0.01). However, there was a significant difference in posture characteristics only in the fast tempo music group (p<0.01). In terms of pain, physical function, and posture characteristics, the fast tempo music group showed significant improvement compared to the slow music tempo group (p<0.05). Conclusions: A customized exercise program using fast-tempo music and slow-tempo music to workers in the automobile parts manufacturing industry, significant differences in pain, physical function, and posture characteristics applied with fast-tempo music were found. In the future, applying an exercise program with a fast tempo is expected to help improve musculoskeletal disorders.
Objective: The aim of this study is to figure out the level of Functional Movement Screen (FMS) of 122 automobile manufacturing workers and to set the FMS score for predicting risk of musculoskeletal disorders. Background: Although today's industrial sites have been becoming automated rapidly, the risks of work-related musculoskeletal disorders (WMSDs) have been on the rise. In the case of WMSDs, it is important to control WMSDs at the early stage. Early detection of WMSDs is very important for the successful treatment. However, the medical examination puts a great financial burden on most workers. To reduce their burden, there is one test to check the musculoskeletal functional condition and to predict the risk of injury, which is called FMS. Method: This research tested the FMS score of 122 workers at a motor company, and also conducted a questionnaire survey of individual characteristics and job characteristics. Results: For the 122 subjects, the average score of FMS is $14.63{\pm}2.27$. There is a negative correlation between FMS and their ages and BMI (p <0.05). FMS is higher when exercising regularly (p <0.05). The FMS scores of musculoskeletal disorder patients are lower than those of normal workers (p <0.05). While it is more likely to become a musculoskeletal disorder patient when FMS score is less than 14, it is more likely to become a normal worker when FMS score is more than or equal to 14. Conclusion: According to the result of FMS test, there is a score difference between individuals with musculoskeletal disorders and normal ones. FMS scores can also predict and identify workers with risk of the musculoskeletal disorders. Application: According to this study, FMS can be expected to have a positive effect on the prevention of WMSDs in worksites.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.