지난 5년간 NdFeB계 이방성 본드자석은 25 MGOe의 높은 자기특성을 강점으로 기존 페라이트 영구자석을 갈음하면서 모터의 경량화라는 새로운 패러다임을 주도했고 자동차용과 전동공구용 모터산업분야에서 두드러진 약진을 보였다. 또한 차체중량감소를 통한 연비향상이라는 자동차산업의 기술동향에 정확히 초점을 두고 기존모터의 50 % 경량화라는 새로운 변혁을 이끌어 냈다. 그러나 2010년 7월에 중국이 희토류원소의 수출규제를 발표함에 따라 2011년 희토류 원자재는 또 한 차례의 폭등을 기록하였고 그 여파는 전방 수요산업에 심각한 충격으로 던져지고 있다. 각 희토류 주요 소비국들은 자원 확보, 희토류 최소사용부품개발 및 희토류 대체 신기술개발 강화에 총력을 다하는 모습이다. 이러한 환경적 변화가 이방성 본드자석 분야에는 중희토류 원소인 Dy의 사용량을 줄이면서 보자력을 향상시키고자하는 기술적 도전을 유발하였고 모터고속화 응용분야에 탐색을 시도하게 하였다. 본 글에서는 희토류 자원문제에 대한 각국 희토류자석산업의 대응과 NdFeB 이방성 본드자석으로 대표되는 Aichi Steel사의 MAGFINE 자성분말에 대해 최근의 개발 동향 및 응용분야에 대해 소개하고자 한다.
Environmental and health concerns over the lead have led to investigation of the alternative Pb-free solders to replace commonly used Pb-Sn solders in microelectronic packaging application. The leading candidates for lead-free solder alloys are presently the near eutectic Sn-Ag-Cu alloys. Therefore, extensive studies on reliability related with the composition have been reported. However, the insufficient drop property of the near eutectic Sn-Ag-Cu alloys has demanded solder compositions of low Ag content. In addition, the solder interconnections in automobile applications like a smart box require significantly improved vibration resistance. Therefore, this study investigated the effect of alloying elements (Ag, Bi, In) on the vibration fatigue strength. The vibration fatigue was conducted in 10~1000Hz frequency and 20Grms. The interface of the as-soldered cross section close to the Cu pad indicated the intermetallic compound ($Cu_6Sn_5$) regardless of solder composition. The type and thickness of IMC was not significantly changed after the vibration test. It indicates that no thermal activities occurred significantly during vibration. Furthermore, as a function of alloying composition, the vibration crack path was investigated with a focus on the IMCs. Vibration crack was initiated from the fillet surface of the heel for QFP parts and from the plating layer of chip parts. Regardless of the solder composition, the crack during a vibration test was propagated as same as that during a thermal fatigue test.
The study of the noise reduction of an automobile has been concentrated on the reduction of the automotive engine noise because the engine noise is the major cause of automotive noise. However, many studies of automotive engine noise led to the interest of the noise reduction of the exhaust and intake system. The method of the reduction of the induction noise can be classified by the method of passive control and the method of active control. However, the passive control method has a demerit to reduce the effect of noise reduction at low frequency (below 500Hz) range and to be limited by a space of the engine room. Whereas, the active control method can overcome the demerit of passive control method. The algorithm of active control is mostly used the LMS (Least-Mean-Square) algorithm because the LMS algorithm can easily obtain the complex transfer function in real-time. Especially, Filtered-X LMS (FXLMS) algorithm is applied to an ANC system. However, the convergence performance of LMS algorithm goes bad when the FXLMS algorithm is applied to an active control of the induction noise under rapidly accelerated driving conditions. So, in order to this problem, the modified FXLMS algorithm using Moving Bandpass Filter was proposed. In this study, MBPF was implemented and use ANC for automotive intake under revived rapidly accelerated driving conditions and it was verified its performance.
The rapid development of the automobile industry is an important factor that led to the dramatic development of synthetic rubber. The tread part of tire that comes in direct contact with the road surface is related to the service life of the tire. Rubber compounds used in tire treads are often blended with SBR (styrene-butadiene rubber) and BR (butadiene rubber) to satisfy physical property requirements. However, when two or more kinds of rubber are blended, phase separation and silica dispersion problems may occur due to non-uniform mixing of the rubber. Therefore, in this study, we synthesized an SBR copolymer with the same composition as that of a typical SBR/BR blend compound by controlling butadiene content during ESBR (emulsion styrene-butadiene rubber) synthesis. Subsequently, silica filled compounds were manufactured using the synthesized ESBR, and their mechanical properties, dynamic viscoelasticity, and crosslinking density were compared with those of the SBR/BR blended compound. When the content of butadiene was increased in the silica filled compound, the cure rate accelerated due to an increased number of allylic positions, which typically exhibit higher reactivity. However, the T-2 compound with increased butadiene content by synthesis less likely to show an increase in crosslink density due to poor silica dispersion. In addition, the T-3 compound containing high cis BR content showed high crosslink density due to its monosulfide crosslinking structure. Because of the phase separation, SBR/BR blend compounds were easily broken and showed similar $M_{100%}$ and $M_{300%}$ values as those of other compounds despite their high crosslink density. However, the developed blend showed excellent abrasion resistance due to the high cis-1,4 butadiene content and low rolling resistance due to the high crosslink density.
언택트 시대에 새로운 여행의 형태로 자동차를 숙박공간으로 활용하는 차박이 주목받고 있다. 저렴한 비용, 편의성, 안전성 등의 장점과 함께 독립적인 여행을 가능하게 하는 차박의 특징으로 인해 차박 수요는 지속적으로 증가하고 있다. 차박에 대한 인기와 관련 산업이 급격히 성장하고 있음에도 불구하고 차박 트렌드를 이해하기 위한 학술적 논의는 거의 이루어진 바가 없는 실정이다. 새로운 형태의 여행 문화로 자리 잡고 관련 산업의 지속적 성장을 위해서는 차박에 대한 대중의 인식의 이해가 필수적이다. 따라서 본 연구에서는 마케팅믹스 이론과 빅데이터 분석을 바탕으로 차박에 대한 대중의 인식을 분석한다. 분석 결과에 따르면 차박은 소비자 주도의 여행 문화로 자리 잡고 있고, 자동차 산업의 애프터마켓 성장에 기여하고 있는 것으로 나타났다. 또한 소비자들은 경제적이고 현명한 방법으로 여행을 즐기는 경향이 강해지고 있으며 소셜 미디어를 통해 정보 공유에 적극적이다는 것을 확인할 수 있었다. 본 연구 결과는 새로운 여행 트렌드인 차박에 대한 초기 연구로써 이론적 기반을 바탕으로 한 빅데이터 분석 연구라는 점에서 의의가 있으며 활성화 방안에 대한 실무적 논의를 하였다는 점에서도 의미가 있다.
현대 세계 경제 체제의 주요 특징인 글로벌 가치사슬은 주로 선진국에 의해 주도되어왔고 개발도상국은 상대적으로 저부가가치 활동을 담당함에 따라 가치분배의 지리적 불균형이 발생하였다. 그러나 이러한 가치분배의 불균형은 점차 완화되기 시작하였는데, 이와 같은 변화에 영향을 미치는 요인을 분석하는 것이 본 연구의 목적이다. 연구 목적의 달성을 위하여 다양한 영향요인 중 글로벌 가치사슬에서의 산업 업그레이딩 방식에 초점을 맞춰 개발도상국의 부가가치 획득에 미치는 영향을 분석하였다. OECD 부가가치 기준 교역자료(TiVA)의 전산업, 식료품·담배산업, 섬유·의류 산업, 컴퓨터·전자산업, 자동차산업을 대상으로 패널분석을 실시하였다. 분석결과 전산업의 경우 개발도상국의 부가가치 획득은 총생산량을 증가시키고 고부가가치 제품을 생산하며 전방참여도를 높일수록 증가하는 것을 확인할 수 있었으며, 세부 산업별 분석결과는 산업별 특성에 따라 조금씩 다른 양상으로 나타났다.
폴리염화비닐(polyvinyl chloride, PVC)은 자동차 내장재(도어 트림 및 대쉬 보드 등)에 아주 널리 사용되고 있으나 특정조건에서 유해물질을 배출하므로 규제가 되는 소재로 알려져 있다. 그러므로 열가소성 폴리올레핀계 고분자인 폴리프로필렌(polypropylene, PP)이 자동차 내장재 부분에서 PVC를 대체할 수 있는 중요한 재료로 부각되고 있다. PP(비정영역:0.855, 결정영역:$0.946g/cm^3$)의 또 다른 장점은 PVC($1.1{\sim}1.45g/cm^3$)에 비해 밀도가 낮으므로 자동차의 중량을 줄일 수 있다는 것이다. 한편 모든 부품은 표면보호와 미관상 코팅이 반드시 필요하며, 그들을 조립하는데 접착제가 필요하다. 지금까지 주로 사용해 온 용제-베이스의 접착제/코팅제의 경우 휘발성 유기화합물(volatile organic compounds, VOC)의 발생과 열악한 작업 환경으로 환경친화적인 수성 접착제/코팅제의 수요가 증가하고 있다. 이러한 맥락에서 본 연구에서는 소수성 고분자 PP에 적용되는 환경친화적인 다양한 수분산 폴리우레탄-우레아 선처리제(primer: 마감도료가 기질에 보다 잘 접착될 수 있도록 선처리하는 도료)를 이온성분 dimethyl propionic acid (DMPA) 함량별, 다양한 NCO/OH 몰비, 변성 실리콘 디올의 다양한 함량 및 소프트세그먼트 함량 등의 여러 배합으로 제조하였다. 제조된 시료 중 DMPA 함량 21 mol%, 소프트세그먼트 함량 73%, 변성 실리곤 디올 5 wt% 및 NCO/OH 몰비 1.2를 사용한 시료가 기질 PP 시트와의 접착력이 우수하였으며, 첨가제는 분산제 0.5 wt%, 레벨링제 0.5 wt%, 소포제 1.5 wt% 및 소광제 3.0 wt%가 가장 적합한 첨가 함량임을 알 수 있었다.
자동차의 엔진룸의 내부를 살펴보면 여러 가지의 장치 및 장비가 복잡하게 설치되어 있고 각종 오일 등의 인화물질을 포함하고 있어 재발화 가능성이 매우 높다. 또한, 폭발가능성도 높기 때문에 운전자나 탑승자가 보닛을 열고 엔진룸에 직접 분말 소화기를 분사하는 방식으로는 한계가 있다. 따라서 엔진룸 내부에서 화재를 감지하여 소화약제를 분사한 뒤, 화재를 진화하는 소화시스템과 엔진룸 내부의 고열에 견딜 수 있고, HFC-227ea를 포함하는 충분한 점성을 가진 폼 형태의 소화약제를 개발 및 시험하였다. 그리고 포소화약제가 가지고 있는 소화원리인 질식 및 냉각효과와 HFC-227ea가 가진 부촉매효과를 동시에 이끌어 내고, 소화 후에도 분말 소화기처럼 잔존물에 의한 2차 피해가 없는 맞춤형 소화약제를 개발하였으며, 차량을 이용한 충돌실험을 통하여 방출이 완료된 후에도 이물질 없이 소화약제를 제거할 수 있는 장점이 존재하는 실험결과를 획득하였다.
Purpose: An increase in the demand for specialized Trauma Centers led to a government-driven campaign, that began in 2009. Our hospital was selected as one of the Trauma Centers, and we reviewed data on trauma patients in order to correlate the mortality at a regional Trauma Center with its contributing factors, such as the severity of the injury, the means of arrival, and the time duration before arrival at our center. Methods: Data on the patients who visited our Trauma Center from January 2010 to November 2011 were retrospectively reviewed using electronic medical records. The patients who had revised trauma scores (RTSs) less than 7 or injury severity scores (ISSs) greater than 15 were included. The patients were categorized as survivors and non-survivors, and the means of arrival as transferred or visited directly. Time durations before arrival of less than one hour were also taken intoconsideration. Results: Two hundred(200) patients were enrolled, and the mortality rate was 36.5%. The most common cause of the accident was an automobile accident, and the most common cause of death was brain injury. The RTSs and the ISSs were significantly different in the non-survivor and the survivor groups. The mortality rate of the patients who were transferred was not statistically different from that of patients who visited directly. However, a time duration before arrival of less than one hour was statistically meaningful. Conclusion: The prognosis of the trauma patients were correlated with the severity of the trauma as can be expected, but the time between the incidence of accident and the arrival at hospital and whether the presence of transfer to trauma center were not statistically significant to the prognosis.
Authors have reviewed the records of seven patients of multiple rib fractures with severe flail chest who were admitted to Hanyang University Hospital during the 3 years period from 1972 through 1975. Of the seven patients studied, automobile accidents led to the injuries in 4 cases, two patients were injured in fall from a tree and on the ox-heading. All who had a blunt trauma without any open wound on the chest. The numbers of the fractured ribs accounted for 6 to 9 of the ribs including double fractures from 3 to 5 ribs. The left side fractures occurred in the 6 patients and in the right only one patient. Thus the flail segment was more often located in the left antero-lateral position than in the right lateral position [the ratio was 6:1].. All cases had associated injuries. The injuries and multiple fractures were the most common associated injuries occurring in four and five of the patients respectively. The patients were classified as having associated head injuries when they were admitted in comatose or semicomatose state. When a major degree of instability of the thoracic cage exists, adequate respiratory change is not possible. For this reason the tracheostomy was performed in five patients in an acutely injured patient with flail chest only after an endotracheal tube has been inserted or after an endotracheal suction. All patients had secondary complications in the pleural cavity, such as hemothorax or hemopneumothorax with or without intrapulmonary hemorrhage and subcutaneous emphysema. Therefore, closed thoracostomy was performed in five patients in the emergency room. The thoracotomy was required in four patients: immediate operation without closed thoracostomy was performed in two patients and the thoracotomy was indicated in two patients after closed thoracostomy, because of increasing intrathoracic hemorrhage. As to the fixation of the flail segments, authors employed two techniques; one was towel clip traction of the flail segments and the other was intramedullary insertion of Kirschner`s wire in to the double fractured rib fragments for the fixation of the flail segments [Kirschner`s wire fixation]. Because` of an different results in the course of treatment between two techniques, data from patients with towel clip traction was compared with those from patients with thoracotomy and Kirschner`s wire fixation of the flail segments. Of the three patients with towel clip traction, two patients required bronchoscopic toilet due to lung atelectasis which developed because of inadequate motion of thoracic cage and poor expectoration. This was in contrast to the four patients with thoracotomy and Kirschner`s wire fixation, who didn`t these complication because of adequate motion of the thoracic cage and subsequent good expectoration.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.