• Journal of Biosystems Engineering
• /
• 제22권3호
• /
• pp.269-278
• /
• 1997

An automatic level measurement system was developed to level the land fer direct seeding of rice. A laser transmitter/receiver set was used to measure land-level. The inclination error occurred in level measurement on irregular land surface could be compensated by attaching rotating mass. The level measuring experiments were performed on three kinds of different shapes(step, random, sine). This system could accurately measure step level of which amplitude was 40mm in 0.5s, random level change within $\pm$ 5mm maximum measurement error, and sine level change of which spatial frequency was 0.5m-1. To verify performance of the inclination error compensation system, frequency transfer function(acceleration input vs. inclination error) was computed by spectral analysis. The inclination error was decreased about 20㏈ by error compensation system.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.491-494
• /
• 2003

An Automatic Water Level Measurement System has been developed in this study. It has the characteristics that it use lower power and solar power and it has the ability of sending data and remote-controlled by wireless MODEM this system was set up in the experimental site and was tested. Also, the management system for the water level data has been developed and will be used by instruments administrating reservoirs.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.756-760
• /
• 1997

In this research, the automatic level measurement system used in land leveling was developed. By using a laser transmitter and a receiver as measuring equipments, level was measured automatically. The driving part of this system was composed of stepping motor, timing belt and pulley. It drived the laser receiver to track laser beam generated form the laser transmitter. The level measuring experiments were performed about three level change shapes (step, random, sine). This system could measure step level change of which amplitude was 40mm in 0.5s, random level change within .+-. mm, maximum measurement error. In case of sine level change, experiment was executed with varying the spatial frequency of level change. As a result, this system was able to measure sine level change of which spatial frequency was 0.5m $^{-1}$ accurately.

• 한국생산제조학회지
• /
• 제5권2호
• /
• pp.57-62
• /
• 1996

Basically, the idea underlying most edge-detection technique is the computation of a local derivative operator used for edge detection in gray level image. This concept can be easily illustrated with the aid of object which shows an image of a simple lilght on a dark background, Using the gray level profile along a horizontal scan line of the image. the first and second derivatives of it were acquired. This study is to develop an automatic measuring system based on the digital image processing which can be applied to the real time measurement of the characteristics of the ultra-thin thickness. The experimental results indicate that the developed automatic inspection can be applied in real situation.

• 한국게임학회 논문지
• /
• 제12권5호
• /
• pp.23-34
• /
• 2012

컴퓨터게임은 재미를 위해 유저에게 지속적인 몰입상태를 유지시켜야 한다. 몰입이론[5]에 따르면 플로우 몰입상태는 유저의 게임숙련도와 게임 난이도가 균형을 유지해야 발생할 수 있다고 한다. 컴퓨터게임은 게임난이도를 자동조절할 수 있지만 유저의 게임숙련도는 게임의 상황과 개인의 성향 및 경험에 따라 다르기 때문에 게임도중에 즉시 파악하기 매우 어렵다. 본 논문에서는 컴퓨터게임 자체적으로 유저의 게임플레이 숙련도를 게임 도중에 즉시 측정할 수 있는 방법을 제안하였다. 제안하는 방법을 사용하기 위해서는 측정대상 컴퓨터게임이 설계 및 구현단계에서 제안하는 방법이 적용되어야만 한다. 제안하는 방법과 게임 난이도의 자동조절 방법을 사용하면 컴퓨터게임은 지속적으로 유저의 플로우 몰입상태가 발생할 수 있도록 게임난이도와 유저의 게임숙련도의 균형을 유지할 수 있다.

• 한국소음진동공학회논문집
• /
• 제22권12호
• /
• pp.1213-1219
• /
• 2012

The purpose of this study is to present a guideline to design a short-term manual measurement of environmental noise level, which is more economical and flexible, but less representative than long-term automatic measurement. The proposed guideline can provide the number of measurement times and the length of measurement term required to secure the extent of the representativeness. The data was collected at 4 sites located in Seoul and at 4 sites located outside of Seoul. The probabilities for five-minute equivalent noise levels, Leq, 5min, to stay in an error range from the quarterly representative noise level were used to evaluate sampling techniques. The probability analysis of the daytime period showed that the noise levels measured between 10 am and 2 pm and between 9 pm and 10 pm have the probabilities higher than 60 %. On the other hand, even for the same length of total measurement time, increasing the number of random samplings results in higher probabilities than increasing the length of measurement term.

• 환경정책연구
• /
• 제8권1호
• /
• pp.31-48
• /
• 2009

부산시 환경소음수준의 연속적 측정이 가능한 소음자동측정 망의 합리적 설치 운영은 부산시의 정온한 환경구축 정책 수립을 위한 중요한 관건이 될 수 있다. 도시 내의 환경소음 수준은 지역 환경수준에 영향을 미치는 제반 요인들의 복합적 작용에 의하여 결정된다. 따라서 정확한 환경소음수준의 측정이 선결되어야만 올바른 환경소음 개선대책의 수립과 추진이 가능하다. 현재 국내에서는 환경소음 실태파악 및 소음저감정책 기초 자료의 확보를 위해 최근에 소음자동측정 망을 구축 중에 있다. 또한 소음측정 망이 설치 운영되는 지역의 경우 측정망 자료의 공개를 통하여 해당 지역의 환경소음 수준을 표시하고 있으나, 측정결과가 시민들이 느끼는 체감 소음을 제대로 반영하지 못하는 것으로 인식되고 있다. 가장 주된 논거는 측정 자료의 신뢰성 부족과 측정망의 불합리한 설치장소로 요약할 수 있다. 본 연구는 현재 부산시 지역에 설치되어 있는 8개 소음자동측정 망의 설치 운영실태 분석에 주안점을 두고 있다.

• 한국정밀공학회지
• /
• 제12권6호
• /
• pp.72-79
• /
• 1995

The purpose of this paper is to develop an automatic measuring system based on the digital image processing which can be applied to the in-process measurment of the characteristics of the thin thickness. The derivative operators is used for edge detection in gray level image. This concept can be easily illustrated with the aid of object shows an image of a simple light object on a dark background, the gray level profile along a horizontal scan line of the image, and the first and second derivatives of the profile. The first derivative of an edge modeled in this manner is 0 in all regions of constant gray level, and assumes a constant value during a gray level transition. The experimental results indicate that the developed automatic inspection system can be applied in real situation.

• 한국군사과학기술학회지
• /
• 제16권2호
• /
• pp.214-217
• /
• 2013

In this paper, we proposed an automatic threshold control method for radar warning receiver. Considering the noise level of the environment, this technique can effectively adjust sensitivity level of radar warning receiver and can offer more accurate radar information for aircraft pilot in noisy circumstances.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.115-120
• /
• 1993

It is difficult to establish a mathematical furnace model and automatic-fumace control because of the difficulty in direct measurement of the inner condition of a blast furnace. To solve this problem, we has developed and actually operated a blast furnace operation control system using artificial intelligence tool to be applied to the blast furnace process computer system. Since this system has a function of automatic Treat level control, higher practicality has been proved than the previous guidance-level expert system. This paper introduces an outline of the system and the result of application.