• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.57 no.4
• /
• pp.302-315
• /
• 2021

In this study, factors such as improvement of a fishing process and safety, reduction of the labor force and headcount and development of the automation technology for offshore (eel and crab) pot fishing vessels were analyzed. A questionnaire survey was conducted to analyze and select the key factors using independent/paired sample t-test and correlation analysis, and a living lab was operated with ship owners, skippers and experts to discuss practical needs of the site. From the result of questionnaire survey and field requirements, it was possible to understand the level of awareness of ship safety, general safety equipment, fishing work process and fishing safety equipment from the point of view of the field. In addition, there were differences in the measurement results of each items because the working environment and experience were different according to the position of the ship owner and the skipper. The results of the questionnaire survey and various perceptions of field stakeholders were reflected when analyzing the fishing system and fishing process to choose the development equipment applicable to the field. From the analysis results, the selected development equipment based on the fishing equipment and process currently in operation are pot washing device, catch separation and fish hold injection device, length limit regulations and bait ejection device after use, automatic main line winding device, bait crusher, automatic (crab) pot hauling separator and so on.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.2
• /
• pp.117-132
• /
• 2018

There always exist nonzero inspection errors whether inspectors are humans or automatic inspection machines. Inspection errors can be categorized by two types, type I error and type II error, and they can be regarded as either a constant or a random variable. Under the assumption that two types of random inspection errors are distributed with the "uniform" distribution on a half-open interval starting from zero, it was proved that inspectors overestimate any given fraction defective with the probability more than 50%, if and only if the given fraction defective is smaller than a critical value, which depends upon only the ratio of a type II error over a type I error. In addition, it was also proved that the probability of overestimation approaches one hundred percent as a given fraction defective approaches zero. If these critical phenomena hold true for any error distribution, then it might have great economic impact on commercial inspection plans due to the unfair overestimation and the recent trend of decreasing fraction defectives in industry. In this paper, we deal with the same overestimation problem, but assume a "symmetrical triangular" distribution expecting better results since our triangular distribution is closer to a normal distribution than the uniform distribution. It turns out that the overestimation phenomenon still holds true even for the triangular error distribution.

• Journal of Ship and Ocean Technology
• /
• v.10 no.4
• /
• pp.24-33
• /
• 2006

So far, the generation of a hull structural analysis model, that is, a finite element model of a hull structure, has been manually performed by a designer using design experience, and thus has required lots of time because of many constraints, the complexity, and the huge size of the hull structure. To make this task automatic, an algorithm for generating the hull structural analysis model is developed using the seam information of the hull structure. A generating system of the hull structural analysis model is implemented based on the developed algorithm. The applicability of the developed algorithm is demonstrated by applying it to the generation of the global and hold structural analysis models of a deadweight 300,000 ton VLCC (Very Large Crude oil Carrier). The results show that the developed algorithm can quickly generate these models at the initial design stage.

• Journal of Korea Game Society
• /
• v.7 no.2
• /
• pp.83-90
• /
• 2007

One result of the trend towards globalization is an increased number of projects that focus on natural language processing. Automatic speech recognition (ASR) technologies, for example, hold great promise in facilitating global communications and collaborations. Unfortunately, to date, most research projects focus on single widely spoken languages. Therefore, the cost to adapt a particular ASR tool for use with other languages is often prohibitive. This work takes a more general approach. We propose an International Phoneticizing Engine (IPE) that interprets input files supplied in our Phonetic Language Identity (PLI) format to build a dictionary. IPE is language independent and rule based. It operates by decomposing the dictionary creation process into a set of well-defined steps. These steps reduce rule conflicts, allow for rule creation by people without linguistics training, and optimize run-time efficiency. Dictionaries created by the IPE can be used with the speech recognition system. IPE defines an easy-to-use systematic approach that can obtained 92.55% for the recognition rate of Korean speech and 89.93% for English.

• Journal of Korean Philosophical Society
• /
• no.125
• /
• pp.63-89
• /
• 2019

The aim of this paper is to examine the so-called theory of automatic action attributed to Plotinus, according to which the sage can act automatically without deliberation or reasoning. Concerns were raised that such a theory runs the risk of turning the agent into an automaton by reducing action to mechanical reflexes to external stimuli. I attempt to show that Plotinus does not hold a theory of automatic action by arguing that the Plotinian sage's non-deliberative action is not automatic at all. For this purpose, I first draw attention to the non-deliberative action of the World-Reason (i.e. the reason of the World-Soul), which is supposed to present an ideal model of action. Indeed, Plotinus mentions that the World-Reason rules the world "as if automatically". This is, however, meant to indicate the spontaneous and natural manner in which the World-Reason rules. In this respect, the way the World-Reason works is compared to the way nature (i.e. the productive power of the World-Soul) works. But Plotinus points out that the World-Reason knows what to do, whereas nature works without knowing. In this connection, Plotinus makes it clear that the World-Reason does not calculate or deliberate about what to do because it already knows it. To clarify this point, I turn to Plotinus' analogy of practical wisdom (phronêsis) and skill, according to which the World-Reason is compared to an accomplished craftsman or artist, who confidently works without any doubt, hesitation or difficulty, thereby expressing her intelligence, unmediated by deliberation. From this perspective, non-deliberative action according to practical wisdom turns out to be superior to deliberative action. Plotinus admits that there are difficult circumstances in which even the skilled craftsman, unlike the World-Reason who always controls the whole situation, needs to deliberate or calculate, but he is nevertheless confident that the craftsman easily finds the solution. This suggests that the sage, who possesses practical wisdom, can act normally like a great master or virtuoso without deliberation, but in an emergency situation he also employs deliberation, but resourcefully and creatively responds to challenge. The attempt is made to elucidate the Plotinian model of sage's action with the help of Csikzentmihalyi's concept of 'flow' and Annas' application of it to the analogy of virtue and skill. Finally, it is shown that the sage's virtuous action, in spite of being a habituated action, is not a passive, routinized, automatic action, but an active, flexible, intelligent action.

• Journal of Environmental Science International
• /
• v.19 no.6
• /
• pp.747-753
• /
• 2010

It follows in quality and sewage exclusion method of the investigation objective sector and the Combined Sewer Overflows which is suitable in regional characteristics and the confluence area against the rainfall initially a flow and the medulla and measurement - it analyzes the initial rainfall outflow possibility control plan which is suitable in the domestic actual condition and it proposes the monitor ring plan for the long-term flow and pollution load data accumulation. From the research which it sees the Infiltration water/Influent water and CSOs investigation it passes by the phase of hazard chain and Namwon right time 4 it does not hold reverse under selecting, Measurement it used the hazard automatic flow joint seal Sigma 910 machine and in case 15 minute interval of the I/I, it measured a flow at case 5, 15 minute standing of the CSOs. The water quality investigation for the water leakage investigation of the I/I and the sewage from the point which is identical with flow measurement during on-the-spot inspection duration against 6 items which include the BOD sampling and an analysis, when the rainfall analysis for CSOs fundamental investigation analyzed against 18 items which include the BOD sampling. Consequently, for the optimum interpretation invasion water / inflow water of the this investigation area day average the lowest flow - water quality assessment veterinarian optimum interpretation hazard average per day - lowest flow - it averages a medulla evaluation law department one lowest flow evaluation technique and it selects, it presentation collectively from here it gets, position result with base flow analysis of invasion water / inflow water.

• Journal of Animal Environmental Science
• /
• v.15 no.3
• /
• pp.251-262
• /
• 2009

In this research dairy cattle barn facilities what are 4,198 houses hold over 50 heads were surveyed by scale and province. Full-time farms hold over 50 heads breed total 344,514 heads. Each of Farms holds 50 to 99 heads were 79.8 percent and breed average 82.1 heads. Dairy cattle barns were constructed september 1995 averagely. Each of barns have $1,740.0\;m^2$ scale. The construction type of dairy cattle barn was almost litter barn type 84.0%, freestyle type 5.1%, mooring+litter ground type 17.3% and other types 4.4%. The litter barn type was popular in small farms. But in large farms, freestyle type was popular than small farms. The construction type of dairy cattle barn was almost litter barn type 84.0%, freestyle type 5.1%, moohng+ltter ground type 17.3% and other types 4.4%. Type of dairy cattle robotic milking system was pipeline 41.5%, herringbone 22.8% and tandem 35.8%. The pipeline type was popular in small farms which have 50~99 heads. But in large farms which have over 200 heads, tandem type was popular than small farms. Proportion of floor type of dairy cattle barn was almost litter type 94.9%. Scraper type was popular in large farms than in small farms. Proportion of roof type of dairy cattle barn was slate 32.5%, vinyl 16.3%, sunlight 11.1%, panel 10.9, zinc plate 8.8 and steel plate 8.3%. Roof type was lots of slate type before 1995. But vinyl type is increasing after 1995. Proportion of wall type of dairy cattle barn was almost open type 83.3% and winch-curtain 26.8%. Utilization period of dairy cattle barn was 9.2 years about milker, 7.9 years about automatic feeder, 9.2 years about waterer and 10.4 years about electric facilities. In this results, there were lots of improvements about automatic feeder.

• Journal of Animal Environmental Science
• /
• v.15 no.3
• /
• pp.231-240
• /
• 2009

In this research pig house facilities what are 3,029 houses hold over 1000 heads were surveyed by scale and province. Full-time farms hold over 1000 heads breed total 7,229,892 heads. And farms breed 2,386.9 heads averagely. Pig houses were constructed august 1995 averagely. Each of houses have $3,017.2\;m^2$ scale. The construction type of pig house was winch-curtain type 77.2% which was most popular, confined type 51.3%, litter type 7.4% and loft type 4.6%. The winch-curtain type was popular than windowless type in pig farms which have 1,000-1,999 heads. But pig house construction type which have more than over 10,000 heads was windowless type more than winch-curtain type. Manure removing type was slurry 72.3% and scraper 38.5% in farms which have 1,000-1,999 heads. Manure removing type was slurry 83.3% in farms which have over 10,000 heads. Proportion of roof type of pig house was slate 51.2%, panel 46.1%. But in middle or small farms, slate type was only 25.0%. Proportion of wall type of pig house was 41.9%, block 21.9%, concrete 7.6%, winch-curtain 6.3%, and bnck 5.9%. Ventilation type of pig house was natural winch 46.1%, mechanical windowless 69.8% and mixed type 53.1%. So, mechanical windowless type was popular than natural winch type. Especially the farm scale is bigger the mechanical widowless type was more. Utilization period of pig house was 8.1 years about automatic feeder, 8.3 years about waterer, 8.2 years about electric facilities and 9.0 years about floor material. Thus, almost of facilities were used at least 8 years.

• Journal of KIISE:Computing Practices and Letters
• /
• v.8 no.2
• /
• pp.127-140
• /
• 2002

In a spatial database system, the semantic integrity should be supported for maintaining the data consistency. In the real world, spatial objects In boundary layer should always meet neighbor objects, and they cannot hold the same name. This characteristic is an implied concept in real world. So, when this characteristic is disobeyed due to the update operations of spatial objects, it is necessary to maintain the integrity of a layer. In this thesis, we propose a spatial-operation-trigger for supporting the integrity of spatial objects. The proposed method is defined a spatial-operation-trigger based on SQL-3 and executed when the constraint condition is violated. A spatial-operation-trigger have the strategy of execution. Firstly, for one layer, the spatial and aspatial data triggers are executed respectively. Secondly, the aspatial data trigger for the other layers is executed. Spatial-operation-trigger for one layer checks whether the executed operation updates only spatial data, aspatial data, or both of them, and determines the execution strategy of a spatial-operation-trigger. Finally, the aspatial data trigger for the other layers is executed. A spatial-operation-trigger is executed in three steps for the semantic integrity of the meet-property of spatial objects. And, it provides the semantic integrity of spatial objects and the convenience for users using automatic correcting operation.

• Imaging Science in Dentistry
• /
• v.54 no.1
• /
• pp.81-91
• /
• 2024

Purpose: The objective of this study was to propose a deep-learning model for the detection of the mandibular canal on dental panoramic radiographs. Materials and Methods: A total of 2,100 panoramic radiographs (PANs) were collected from 3 different machines: RAYSCAN Alpha (n=700, PAN A), OP-100 (n=700, PAN B), and CS8100 (n=700, PAN C). Initially, an oral and maxillofacial radiologist coarsely annotated the mandibular canals. For deep learning analysis, convolutional neural networks (CNNs) utilizing U-Net architecture were employed for automated canal segmentation. Seven independent networks were trained using training sets representing all possible combinations of the 3 groups. These networks were then assessed using a hold-out test dataset. Results: Among the 7 networks evaluated, the network trained with all 3 available groups achieved an average precision of 90.6%, a recall of 87.4%, and a Dice similarity coefficient (DSC) of 88.9%. The 3 networks trained using each of the 3 possible 2-group combinations also demonstrated reliable performance for mandibular canal segmentation, as follows: 1) PAN A and B exhibited a mean DSC of 87.9%, 2) PAN A and C displayed a mean DSC of 87.8%, and 3) PAN B and C demonstrated a mean DSC of 88.4%. Conclusion: This multi-device study indicated that the examined CNN-based deep learning approach can achieve excellent canal segmentation performance, with a DSC exceeding 88%. Furthermore, the study highlighted the importance of considering the characteristics of panoramic radiographs when developing a robust deep-learning network, rather than depending solely on the size of the dataset.