• 대한임베디드공학회논문지
• /
• 제7권1호
• /
• pp.41-52
• /
• 2012

Recently, FlexRay was developed to replace controller area network (CAN) protocol in chassis networking systems, to remedy the shortage of transmission capacity and unsatisfactory real-time transmission delay of conventional CAN. FlexRay network systems require correct synchronization and complex scheduling parameters. However, because platform configuration register (PCR) setting and message scheduling is complex and bothersome task, FlexRay is more difficult to implement in applications than CAN protocol. To assist a network designer for implementing FlexRay cluster, this paper presents an analysis of FlexRay platform configuration register and automatic generation program of PCR. To demonstrate the feasibility of the automatic generation program, we evaluated its performance using experimental testbed.

• 한국CDE학회논문집
• /
• 제14권3호
• /
• pp.197-206
• /
• 2009

In a finite element analysis of the metal forming processes having large plastic deformation, largely distorted elements are unstable and hence they influence upon the result toward negative way so that adaptive remeshing is required to avoid a failure in the numerical computation. Therefore automatic mesh generation and regeneration is very important to avoid a numerical failure in a finite element analysis. In case of generating quadrilateral mesh, the automation is more difficult than that of triangular mesh because of its geometric complexity. However its demand is very high due to the precision of analysis. Thus, in this study, an automatic quadrilateral mesh generation and regeneration method using grid-based approach is developed. The developed method contains decision of grid size to generate initial mesh inside a two dimensional domain, classification of boundary angles and inner boundary nodes to improve element qualities in case of concave domains, and boundary projection to construct the final mesh.

• 대한음성학회지:말소리
• /
• 제61호
• /
• pp.101-111
• /
• 2007

A modified speech recogniser have been proposed for automatic capitalisation generation to improve the readability of English speech recognition output. In this modified speech recogniser, every word in its vocabulary is duplicated: once in a de-caplitalised form and again in the capitalised forms. In addition its language model is re-trained on mixed case texts. In order to evaluate the performance of the proposed system, experiments of automatic capitalisation generation were performed for 3 hours of Broadcast News(BN) test data using the modified HTK BN transcription system. The proposed system produced an F-measure of 0.7317 for automatic capitalisation generation with an SER of 48.55, a precision of 0.7736 and a recall of 0.6942.

• 한국자동차공학회논문집
• /
• 제3권6호
• /
• pp.145-153
• /
• 1995

An algorithm for the automatic generation of quadrilateral shell elements on three-dimensional sculptured surfaces has been developed, which is one of the key issues in the finite element analysis of structures with complex shapes such as automobile structures. Mesh generation on sculptured surfaces is performed in three steps. First a sculptured surface is transformed to a projection plane, on which the loops are subdivided into subloops by using the best split lines, and with the use of 6-node/8-node loop operators and a layer operator, quadrilateral finite elements are constructed on this plane. Finally, the constructed mesh is transformed back to the original sculptured surfaces. The proposed mesh generation scheme is suited for the generation of non-uniform meshes so that it can be effectively used when the desired mesh density is available. Sample meshes are presented to demonstrate the versatility of the algorithm.

• 대한기계학회논문집
• /
• 제19권3호
• /
• pp.647-660
• /
• 1995

Given the tetrahedron-based octree approximation of a solid as described in part(I) of this thesis, in this part(II) a systematic procedure of 'boundary moving' is developed for the fully automatic generation of 3D finite element meshes. The algorithm moves some vertices of the octants near the boundary onto the exact surface of a solid without transforming the topology of octree leaf elements. As a result, the inner octree leaf elements can be used as exact tetrahedral finite element meshes. In addition, as a quality measure of a tetrahedral element, 'shape value' is propopsed and used for the generation of better finite elements during the boundary moving process.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 추계 학술대회논문집
• /
• pp.108-114
• /
• 1999

In this paper. a new automatic multi=block grid generation technique for general 2D regions is introduced. According to this simple and robust method, the domain of interest is first triangulated by using Delaunay triangulation of boundary points, and then geometric information of those triangles is used to obtain block topology. Once block boundaries are obtained. structured grid for each block is generated such that grid lines have $C^0-continuity$ across inter-block boundaries. In the final step of the present method, an elliptic grid generation method is applied to smoothen grid distribution for each block and also to re-locale the inter-block boundaries, and eventually to achieve a globally smooth multi-block structured grid system with $C^1-continuity$.

• Journal of Information Processing Systems
• /
• 제2권3호
• /
• pp.189-193
• /
• 2006

In this study we propose an automatic reading system for diagnostic DNA chips. We define a general specification for an automatic reading system and propose a possible implementation method. The proposed system performs the whole reading process automatically without any user intervention, covering image acquisition, image analysis, and report generation. We applied the system for the automatic report generation of a commercialized DNA chip for cervical cancer detection. The fluorescence image of the hybridization result was acquired with a $GenePix^{TM}$ scanner using its library running in HTML pages. The processing of the acquired image and the report generation were executed by a component object module programmed with Microsoft Visual C++ 6.0. To generate the report document, we made an HWP 2002 document template with marker strings that were supposed to be searched and replaced with the corresponding information such as patient information and diagnosis results. The proposed system generates the report document by reading the template and changing the marker strings with the resultant contents. The system is expected to facilitate the usage of a diagnostic DNA chip for mass screening by the automation of a conventional manual reading process, shortening its processing time, and quantifying the reading criteria.

• 융합보안논문지
• /
• 제15권7호
• /
• pp.21-29
• /
• 2015

급속하게 늘어나는 악성앱을 효과적으로 분석하기 위해 악성앱 자동 분석 시스템이 구축 활용되고 있다. 악성앱의 행위를 보다 많이 활성화시키기 위해 무작위 터치를 발생시키는 자동 터치 모듈을 추가하는 연구가 진행되고 있다. 본 연구에서는 실제 사람의 터치와 자동으로 발생되는 무작위 터치와의 차이를 구별할 수 있는 방안을 제시한다. 실험을 바탕으로 사람들은 한번 터치 후 다음 터치와의 거리가 자동화 모듈보다 짧은 경향이 있으며, 손가락 움직임으로 터치할 수 있는 빠르기도 한계가 있고, 사람은 일반적으로 스마트폰의 최 외곽 지역은 잘 터치하지 않는다는 사실을 알게 되었다. 본 연구에서는 실험을 통해 얻은 통계적 수치를 이용하여 스마트폰의 터치에서 사람인지 자동화 모듈인지 판단할 수 있는 알고리즘을 개발하였다. 본 연구는 궁극적으로 자동 터치 발생을 통한 자동 분석 시스템 고도화에 기여할 것으로 예상된다.

• 전기학회논문지
• /
• 제59권10호
• /
• pp.1823-1831
• /
• 2010

This paper proposes an automatic tracking control algorithm for efficiency improvement of photovoltaic generation. Increasing the power of PV systems should improve the efficiency of solar cells or the power condition system. The normal alignment of the PV module always have to run perpendicular to the sun's rays. The solar tracking system, able to improve the efficiency of the PV system, was initiated by applying that to the PV power plant. The tracking system of conventional PV power plant has been studied with regard to the tracking accuracy of the solar cells. Power generation efficiency were increased by aligning the cells for maximum exposure to the sun's rays. Using a perpendicular position facilitated optimum condition. However, there is a problem about the reliability of tracking systems unable to not track the sun correctly during environmental variations. Therefore, a novel control algorithm needs to improve the generation efficiency of the PV systems and reduce the loss of generation. This control algorithm is the proposed automatic tracking algorithm in this paper. Automatic tracking control is combined the sensor and program method for robust control in environment changing condition. This tracking system includes the insolation, rain sensor and anemometer for climate environment changing. Proposed algorithm in this paper, is compared to performance of conventional tracking control algorithm in variative insolation condition. And prove the validity of proposed algorithm through the experimental data.

• 한국CDE학회논문집
• /
• 제4권2호
• /
• pp.79-86
• /
• 1999

A general approach to automatic generation of triangular meshes on three-dimensional surfaces is presented in this paper. The approach, developed with emphasis on program generality and interface with CAD/CAM systems, is based on the double mapping method and the looping method. The double mapping method is introduced and anew splitting scheme is proposed for the looping method employed for triangular mesh generation on the parametric domain. Several application examples are given.