• Journal of Korean Society for Atmospheric Environment
• /
• v.27 no.6
• /
• pp.734-745
• /
• 2011

In this article, we reviewed the monitoring status of hazardous VOC in ambinet air in Korea and some developed countries such as USA, Japan, and UK. In many countries, two types of VOC monitoring stations are being operated, i.e., for hazardous VOC and photochemical VOC. Each country has different target VOC but all includes benzene. Korea, Japan, and UK have a national ambient air quality standard for benzene, but no national standard has been established in the USA. For sampling of the hazardous VOC, the adsorbent method is adopted in Korea and UK, while the canister method is used in the USA. Both of adsorbent and canister methods are used in Japan. USA and UK have only non-automatic method to measure the hazardous VOC, and the individual samples are being sent to their national laboratories for integrated analysis. On the other hand, Korea and Japan have automatic and nonautomatic methods to measure the hazardous VOC. Local governments or regional environmental agencies in Korea and Japan have the authorization for the sampling and analysis of VOC. According to a field study to evaluate the performance of automatic VOC monitoring system, controlling the moisture in the air sample was identified as the most important problem. However, careful attention must be given to using a moisture removing device such as Nafyon dryer, because of unexpected artifacts formation. In order to have reliable data, it is highly recommended not only to use internal standards, but to use appropriate hydrophobic adsorbents as a cold trap in any automatic on-line VOC monitoring system.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.973-978
• /
• 2009

In this study, the thermal environment characteristics of On-Off control and thermal difference proportional control method in floor radiant heating system were researched by computer simulation. For the analysis of unsteady heat transfer phenomena in household, the method of using electrical equivalent R-C circuit is applied, and radiation heat transfer between panel, ceiling and walls in household is calculated by enclosure analysis method. The parametric study on two control methods, conventional on-off control and temperature error based time control(T.E.B.T.C.) method, are performed to compare thermal heating control performances, respectively.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.35 no.1
• /
• pp.9-14
• /
• 2022

In this study, a smart jack-up system was developed to prevent safety accidents by performing risk analysis when a structure is lifted for maintenance. A quantitative risk analysis program that can analyze the risk using the pairwise comparison matrix analysis method was developed. The risk was analyzed in real-time for the lifting structure by connecting the program with an automatic jack-up system. Displacements were measured by the IR sensor among the components of the automatic jack-up system, and the displacements were provided to the quantitative risk analysis program. To confirm the performance of the smart automatic jack-up system, experiments were conducted on bridge and risk analysis was performed when a superstructure was lifted. A linear variable differential transformer (LVDT) was also installed on the bridge to verify the performance of the smart automatic jack-up system. The maximum displacements were measured using the devices, and the declinations were compared. The performance of the simultaneous operation of the jack-up device was verified by the analysis of variance (ANOVA).

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2001.10a
• /
• pp.198-201
• /
• 2001

This paper deals with the Automatic Analysis of Continuous Beams with Variable Cross-Section. Based on the principle of superpositon and the method of consistent deformations, the governing differential equation is derived for the deflection and stress resultants of such continuous beam. The effects of variable load conditions, the end constraints on the deflection and the stress resultants are analyzed. It is expected that the results obtained herein can be used practically in the structural engineering.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.703-706
• /
• 2003

Yield enhancement in semiconductor fabrication is important. It is ideal to prevent all the failures. However, when a failure occurs, it is important to quickly specify the cause stage and take countermeasure. The automatic method of failure pattern extraction from fail bit map provides reduced time to analysis and facilitates yield enhancement. This paper describes the techniques to automatically classifies a failure pattern using a fail bit map, a new simple schema which facilitates the failure analysis.

• Journal of Convergence for Information Technology
• /
• v.11 no.1
• /
• pp.109-117
• /
• 2021

In this paper, the meta-model based approximate optimization was carried out for the structure design of an ocean automatic salt collector in order to minimize the structure weight. The structural analysis was performed by using the finite element method to evaluate the strength performance of the ocean automatic salt collector in its initial design. In the structural analysis, it was evaluated the strength performance of the design load conditions. The optimum design problem was formulated so that design variables of main structure thickness would be determined by minimizing the structure weight subject to strength performance constraints. The meta-models used in the approximate optimization were the response surface method, Kriging model, and Chebyshev orthogonal polynomials. Regarding to the numerical characteristics, the solution results from approximate optimization techniques were compared to the results of non-approximate optimization. The Chebyshev orthogonal polynomials among the meta-models used in the approximate optimization showed the most appropriate optimum design results for the structure design of the ocean automatic salt collector.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.12
• /
• pp.2995-3006
• /
• 1993

An automatic mesh generation scheme has been developed for finite element analysis with two-dimensional, quadrilateral elements. The basic strategies of the method are to transform the analysis domain into loops with key nodes and the loops are recursively subdivided into subloops with the use of best split lines. Finally by using the basic loop operators, the meshes are completed. In this algorithm an eight-node loop operator is proposed, which is useful in the area where the change of element size is large and the splitting criteria for subdividing the loops have also been modified to the existing algorithms. Lines, arcs, and cubic spline curves are used to define the boundaries of analysis domain. Sample meshes for several geometries are presented to demonstrate the robustness of the algorithm.

• The Journal of Fisheries Business Administration
• /
• v.38 no.1 s.73
• /
• pp.115-132
• /
• 2007

Implementing the automatic identification in supply chain management is essential for effective and efficient process control. Though the GTIN based bar code system is generally used as an automatic identification method in most industries, it can not identify individual item, and is not appropriated for products' reliability and safety management. So the RFID system with EPC is considered as a better solution for resolving those problems. This study reviewed automatic identification code systems and the attributes and characteristics of RFID Gen 2 which became a global standard recently for supply chain management. Particularly, this study analyzed RFID Gen 2 systems' read rates on various conditions including distances between tags and readers and between antennas, condensation, and several packing materials in practical supply chain environment. The results of this study showed that the RFID Gen 2 had high read ratio in practical application and would be adopted as a new automatic identification means for traceability systems.

• MALSORI
• /
• no.48
• /
• pp.57-67
• /
• 2003

This paper presents a systematic description of exceptional pronunciations for automatic Korean pronunciation generation. An automatic pronunciation generator in Korean is an essential part of a Korean speech recognition system and a TTS (Text-To-Speech) system. It is composed of a set of regular rules and an exceptional pronunciation dictionary. The exceptional pronunciation dictionary is created by extracting the words that have exceptional pronunciations, based on the characteristics of the words of exceptional pronunciation through phonological research and the systematic analysis of the entries of Korean dictionaries. Thus, the method contributes to improve performance of automatic pronunciation generator in Korean as well as the performance of speech recognition system and TTS system in Korean.

• Convergence Security Journal
• /
• v.6 no.3
• /
• pp.107-115
• /
• 2006

It discovered a design error from the module to search required installing security patch of Windows Update and Automatic Updates that Microsoft supports it to install security patch easily and quickly. It explains and tests security patch-disguise attack by this error. Security patch-disguise attack is to maintains a vulnerability and to be not searched the security patch simultaneously. Also it composes an attack scenario. Is like that, it proposes the method which solves an design error of the module to search required installing security patch.